Abstract:In order to study the space charge behavior of imported DC cable's XLPE material at high temperatures, we prepared undegassed and degassed XLPE samples for the tests, including DC conduction, dielectric and space charge during steady and transient processes at high temperatures. The results show that both the conduction current and dielectric loss of undegassed XLPE are larger than those of degassed XLPE. Negative charge accumulation is observed in the bulk of degassed and undegassed XLPE under-30 MV/m, and the distortion ratio of internal electric fields is below 25％ at 30 ℃ and 70 ℃. A positive space charge packet appears and subsequently moves quickly within the first 2 s polarization under-100 MV/m at 70 ℃. However, the injection and migration of a negative space charge packet can only be observed when the applied field raises to-150 MV/m. Here, both polarities of space charge packets follow negative differential mobility. The analyses reveal that degassing treatment can effectively reduce the amount of crosslinking byproducts in XLPE, resulting in the decrease of ionization and conductivity in low frequency regions. A small amount of negative charge accumulating in the bulk is produced mainly by the ionization of crosslinking byproducts and impurities, but the positive charge is injected from the anode with the increase of electric field, and the rate of impurity ionization is higher than the positive charge injection rate. During the initial stage of polarization processes under-150 MV/m at 70 ℃, the fast transit of positive charge leads to the severe distortion of the local field near the cathode (up to 61.5％), resulting in a large amount of negative charge injection and the formation of a negative space charge packet in the bulk.

Analysis of Influence Factors on Space Charge Accumulation Characteristics of 320 kV XLPE Cable

Study on space charge accumulation characteristics of 320 kV cross-linked polyethylene cable joints

Correlation of Traps Inside XLPE and Polypropylene with Space Charge Dynamics under Polarity Reversal Condition

Space Charge Characteristics of XLPE at Different Temperatures for Long-time Vulcanization Process

Numerical Analysis of Thermo-Electric Field for AC XLPE Cables with Different Service Times in DC Operation Based on Conduction Current Measurement

Analysis of Thermo-electric Coupled Simulation for 10 Kv AC XLPE Cable under Different DC Topologies and Laying Modes

Effect of Thermal Ageing on Space Charge Behavior of HVDC XLPE Materials

Study on the influencing factors of space charge dynamic behavior in XLPE insulation under alternating current electric field

Simulation study of space charge behavior characteristics in xlpe cable insulation under alternating current field

Automated Space Charge Classification Inside ±500-Kv HVDC Cable Insulation Using Fusion of Superpixel and Deep Features for Remote Condition Assessment.

Electrical Insulation Performance of Cross‐linked Polyethylene/mgo Nanocomposite Material for ±320 Kv High‐voltage Direct‐current Cables

Insulation Properties and Interfacial Quantum Chemical Analysis of Cross-Linked Polyethylene under Different Degassing Time for HVDC Cable Factory Joint Applications

Electrical and Physico-chemical Properties of XLPE under Different Vulcanization Pressures for 500 Kv EHVDC Cable Factory Joint

Space Charge Behavior of DC Cable's XLPE Material at High Temperatures

Electrical Insulation Properties of Material Interfaces in HVDC Cable Factory Joint

Charge Transport in Full-Size HVDC Cable Joint with Modeling of XLPE/EPDM Interface

Effect of thermal ageing on charge dynamics and material properties of 320 kV HVDC XLPE

Analysis of the Dynamic Characteristics of XLPE Pellet Space Charge

Space Charge Accumulation at Material Interfaces in HVDC Cable Insulation Part I—Experimental Study and Charge Injection Hypothesis

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Thermo‐electric Field Analysis of AC XLPE Cable in Monopole, Bipole, and Tripole DC Operation Modes