Abstract:This study explores nanoparticle application in textile industry effluent dye removal. Specifically, copper‐oxide and iron‐oxide nanostructures are investigated for their efficacy. Results indicate their high adsorption capacities and suitability for large‐scale implementation, offering a solution for wastewater treatment. Additionally, Response Surface Methodology is used to optimize the adsorption process parameters that include adsorbent dosage, adsorbent‐adsorbate contact time, and pH. Textile industry wastewater contaminated with dye effluents poses a significant environmental challenge. Numerous nanoparticles are used as adsorbents to treat similarly stimulated wastewater, but particularly nanomaterials synthesized through green methods have gained prominence. To assess their practical applicability in addressing real‐world textile wastewater pollution, studies on dye removal from authentic textile industrial effluents are recommended. As a result, a study focused on the removal of dye from real textile industrial effluent is conducted, and biosynthesized copper oxide nanoparticles and iron oxide nanorods are chosen as adsorbents. The investigation scrutinized the influence of adsorbent dosage, adsorbent‐adsorbate contact time, and wastewater pH on the percentage of dye adsorption. These findings indicate that increasing the adsorbent dosage and contact time leads to a higher percentage of dye removal. Notably, copper oxide nanoparticles exhibit superior dye removal efficiency at pH levels 5 and 7, outperforming the maximum dye removal efficiency of iron oxide nanorods at pH 12. The study achieved an impressive process efficiency of 95.24% for copper oxide nanoparticles and 62.5% for iron oxide nanorods. Response surface methodology (RSM) is employed for statistical data analysis and optimization of dye removal process parameters to maximize efficiency. Overall, the results demonstrate that biosynthesized nanomaterials offer a promising and effective solution for removing dyes from textile industrial wastewater.

Optimization of photocatalytic degradation of Biochemical Oxygen Demand from textile industry effluent using copper oxide nanoparticles by response surface methodology

Utilization of Eco‐friendly Copper Oxide Nanoparticles and Iron Oxide Nanorods in Dye Removal from Real Textile Industry Effluent

Biogenic synthesis of copper oxide nanoparticles using a cold tolerant bacterium for RB5/DR23 Azo dye adsorption

Effect of Cu Doping on ZnO Nanoparticles as a Photocatalyst for the Removal of Organic Wastewater

Use of biogenic copper nanoparticles synthesized from a native Escherichia sp. as photocatalysts for azo dye degradation and treatment of textile effluents.

Proficient Photocatalytic and Sonocatalytic Degradation of Organic Pollutants Using CuO Nanoparticles

Optimization of CuAl2O4 Nanoparticles for Enhanced Photocatalytic Degradation of Organic Dyes Under UV and Visible Light

CuO/PANI nanocomposite: an efficient catalyst for degradation and reduction of pollutants

Enhanced Photodegradation of Organic Dyes Using Copper and Zinc Aluminate Nanophotocatalysts

Synthesis of nanostructured cupric oxide for visible light assisted degradation of organic wastewater pollutants

Effect of H2O2 @CuONPs in the UV Light-Induced Removal of Organic Pollutant Congo Red Dye: Investigation into Mechanism with Additional Biomedical Study

Facile synthesis of ZnO nanospheres by co-precipitation method for photocatalytic degradation of azo dyes: optimization via response surface methodology

Adsorption of copper from water using TiO2-modified activated carbon derived from orange peels and date seeds: Response surface methodology optimization

Efficient Dye Removal Using Fe3O4.MnO2.MoS2 Nanocomposite in Optimized Photocatalytic Ozonation Process

Bisphenol A removal from aqueous solutions using novel UV/persulfate/H2O2/Cu system: optimization and modelling with central composite design and response surface methodology

Green synthesis of CuO nanoparticles using Jasmin sambac extract: Conditions optimization and photocatalytic degradation of Methylene Blue dye

Copper(II)-Doped Carbon Dots as Catalyst for Ozone Degradation of Textile Dyes

Simultaneous ultrasound-assisted ternary adsorption of dyes onto copper-doped zinc sulfide nanoparticles loaded on activated carbon: optimization by response surface methodology

Investigating the effect of hydrogen peroxide as an electron acceptor in increasing the capability of slurry photocatalytic process in dye removal.

Facile combustion derived synthesis of copper oxide nanoparticles: Application towards photocatalytic, electrochemical and DNA cleavage studies

Fabrication of new composite NCuTiO2/CQD for photocatalytic degradation of ciprofloxacin and pharmaceutical wastewater treatment: degradation pathway, toxicity assessment