Abstract:The high energy demand and associated CO<sub>2</sub> emissions to produce Portland cement (OPC) create the need for alternative types of binders that can be produced in a more environmentally friendly manner. These alternative binders either have a reduced OPC content or can be produced entirely without the use of OPC clinker. To allow their widespread use also in reinforced concrete components, these binders must meet the same durability requirements as types of cement that have already been standardized. This requires a thorough characterization of the materials and, in addition, a verification of the applicability of the evaluation criteria known from the traditional binders. One of the most important factors influencing the transport processes in the material and therefore the durability, is the penetration resistance of the pore structure for aggressive species, such as chloride ions. One key parameter for describing the pore structure is the formation factor (FF), which is used for various applications to evaluate durability. It is determined based on the ratio of the electrical resistivity of the concrete and of the pore solution. In this study, mortars produced with different alternative binders are characterized in terms of their formation factor and pore size distribution. In addition, chloride migration coefficients determined by the Rapid Chloride Migration (RCM) test are related to the formation factor. The test program includes nine different alternative binders and two reference cements: In addition to a CEM I and CEM III/B, two calcined clays and a modified steel mill slag were investigated as supplementary cementitious materials (SCMs), as well as a calcium sulphoaluminate (CSA) cement and a calcium silicate hydrate (C-S-H) binder. Four materials belong to the group of alkali-activated mortars: Two geopolymers and two alkali-activated slags were investigated here. It is shown that both, the AC resistances and the conductivities of the pore solutions, differ greatly among the mortars investigated. The formation factor is a suitable parameter for a simplified estimation of the chloride penetration resistance of the investigated alternative binders, provided that realistic values of the pore solution conductivities are determined and used for the calculations.

Mortars Based on a Ternary Binder from Lime, Metakaolin and Calcium Hemihydrate

Influence of Metakaolin on the Properties of Hydroxyethyl Methyl Cellulose Modified Mortar

Development of eco-friendly binder using metakaolin-fly ash–lime-anhydrous gypsum

Effect of four-component binder on characteristics of self-compacting and fibre-reinforced self-compacting mortars

Multicomponent Low Initial Molar Ratio of SiO2/Al2O3 Geopolymer Mortars: Pilot Research

Mechanical properties of low calcium alkali activated binder system under ambient curing conditions

Magnesium Potassium Phosphate Cement-Based Derivatives for Construction Use: Experimental Assessment

Durability self-compacting mortar under external chemical attacks based on composite binder

Strength, Fracture and Durability Characteristics of Ambient Cured Alkali—Activated Mortars Incorporating High Calcium Industrial Wastes and Powdered Reagents

Study on the Mechanical Properties of Two General-Purpose Cement–Lime Mortars Prepared Based on Air Lime

Effect of Fine Aggregates on Properties of Magnesium Potassium Phosphate Cement Mortar

Applicability of the formation factor for different alternative binder types investigated on mortars

Insulation efficiency of alkali-activated lightweight mortars containing different ratios of binder/expanded perlite fine aggregate

Stabilized mortar with air incorporator agent and plasticizer set retarder: performance measurement

Cementitious binder of phosphogypsum and other materials

Improving the Early Age Strength of Eco-Efficient Mortar with Low Clinker Content Considering Binder Granulometry and Chemical Additives

Properties of Mortars Formulated from Self-Compacting High-Performance Concrete Containing Various Mineral Additions

Strength prediction and mix design procedures for geopolymer and alkali-activated cement mortars comprising a wide range of environmentally responsible binder systems

A STUDY ON MECHANICAL PROPERTIES AND STRUCTURE OF ANHYDRITE BINDER MODIFIED BY ULTRA-DISPERSED SILTSTONE

Strength, Shrinkage and Early Age Characteristics of One-Part Alkali-Activated Binders with High-Calcium Industrial Wastes, Solid Reagents and Fibers

Hydration, Compressive Strength and Durability of Eco-friendly Cement Mortars Containing Recycled Brick Powder and Metakaolin