Abstract:Silty sand can be prone to erosion because it is short of stability cementation materials. In recent years, various emerging soil stabilizers, especially natural organic substance and polymer, have been used to improve soil strength, water stability and ability of erosion resistance. In this study, a new type of soil stabilization additive modified carboxymethyl cellulose (M-CMC), consisting of carboxymethyl cellulose (CMC) and polyacrylamide (PAM), was developed for stabilization treatment of silty sand. A series of laboratory tests were conducted to evaluate the performance of M-CMC application on shear strength, permeability, water susceptibility and microstructure of the silty sand soil treated with additive concentration range of 0% - 1.3%. Moreover, rainfall simulation experiments were conducted to evaluate the effect of M-CMC on the erosion control of silty sand which compacted soil in a large-sized runoff (1 m2) plots. Test plot which treated with 1.1% concentration of soil stabilizer and control plot which treated with same amount of water were cured outdoor for 50 days before rainfall simulation test. Rainfall intensity was applied at 120 mm·h-1 for 60 min. Finally, a field test is performed in order to assess the practical application effect of silty sand with 1.1% M-CMC. In general, the results showed that an increase of the concentration of M-CMC resulted in an improvement in water susceptibility and shear strength but a decrease in the infiltration rate. Internal friction angle of the treated soil remarkably increased under a low M-CMC concentration (less than 0.7%), while cohesion of them sharply increased under a relatively high M-CMC concentration (larger than 0.7%). Water susceptibility of the treated samples was improved remarkably under a relatively high M-CMC concentration (larger than 0.7%). Permeability coefficient of them decreased significantly when the M-CMC concentration was increased from 0 to 0.5% and, then, from 0.9% to 1.3%. Based on the images obtained from a scanning electron microscopy (SEM), the “coating” and “netting” effects were attributable to the observed improvement of the treated soil. When a plot was protected by a thin layer of soil treated with 1.1% MCMC, its erosion resistance was greatly improved, infiltration rate of water and soil loss yield of plot decreased greatly and even though under a rainfall intensity of 120 mm·h-1. The field test with long-term monitoring (three years) confirmed the M-CMC can effectively control erosion of silty sand slopes for a prolonged period of time.

Assessment of Polyacrylamide Concentration in Construction Stormwater Runoff Using an ASTM D6459 Rainfall Simulator

Effects of polyacrylamide on soil erosion and nutrient losses from substrate material in steep rocky slope stabilization projects

Polyacrylamide and Water Quality Effects on Infiltration in Sandy Loam Soils

Towards sustainable management of polyacrylamide in soil-water environment: Occurrence, degradation, and risk

Effects of polyacrylamide molecular weight and mass concentration on water transport characteristics of iron tailings

Polyacrylamide distribution in columns of organic matter-removed soils following surface application

Runoff Mitigation in Croplands: Evaluating the Benefits of Straw Mulching and Polyacrylamide Techniques

Modeling phosphorus transport in soil columns amended with polyaluminum chloride and anionic polyacrylamide water treatment residuals: implications for stormwater bioretention systems

Stormwater runoff microplastics: Polymer types, particle size, and factors controlling loading rates

Polyacrylamide degradation and its implications in environmental systems

SOIL COLLOIDAL P RELEASE POTENTIALS UNDER VARIOUS POLYACRYLAMIDE ADDITION LEVELS

Sequential usage of charged polyacrylamide for positive feedback in enhancing dewaterability of dredged sediment

Synthetic and biopolymers for lake restoration - An evaluation of flocculation mechanism and dewatering performance

Phosphorus Transport and Retention in Soil Columns Amended with Polyaluminium Chloride and Anionic Polyacrylamide Water Treatment Residuals: Influence of Phosphorus Concentration, Ph, and Flow Rate

Impact of polymer mixtures on the stabilization and erosion control of silty sand slope

Monitoring the impacts of rainfall characteristics on sediment loss from road construction sites

Effect of Different Ameliorants on the Infiltration and Decontamination Capacities of Soil

Screening of Water Retention Agent for Moisture Content Regulation in the Biocover of Municipal Landfill

Resilient Characteristics of Polymer Emulsion-Treated Sandy Soil

Holistic evaluation of inlet protection devices for sediment control on construction sites

Measuring sediment loads and particle size distribution in road runoff: Implications for sediment removal by stormwater control measures