Abstract:The rural residences of Northwest China are characterized by a state of high energy consumption and low comfort due to the limited economic level and awareness of energy-saving compared with the urban residences. To remedy this, appropriate passive design strategies should be adopted first, in order to provide a design mode with low energy consumption and low cost for rural residences under the premise of thermal comfort. In this paper, taking Hanzhong region (Shaanxi Province, China) as an example, we establish a benchmark model based on a field survey and develop an optimization process by combining EnergyPlus simulation software, the MOBO optimization engine, and weighted sum method. The action mechanisms of passive design parameters, including the building orientation, length–width ratio, building envelope parameters, external shading system, and window–wall ratio, on heating, cooling, and total energy consumption are analyzed, and the quantitative relationships between single-parameter and energy consumption are established. Then, the mutually restricted indices of total energy consumption and initial investment cost are taken as optimization objectives, and 17 design parameters are selected as the optimization variables. The NSGA-II algorithm is adopted to conduct the multi-parameter, multi-objective optimization design for rural houses in Hanzhong area, through coupling of the EnergyPlus and MOBO software. In this way, Pareto solutions are obtained and the value distributions of the multi-objectives and design parameters are analyzed. Based on the actual requirements of decision-makers and using the weight method, three design schemes focusing on different performance tendencies are proposed. The results indicate that by using the proposed optimization process, the building energy consumption can be significantly reduced while taking initial investment costs into account, where the energy-saving rate is in the range of 31.9–61.5%. When the EC/IC ratio is 1:1, 2:1, and 1:2, the energy-saving rate can reach 51.5%, 57.8%, and 43.5%, respectively. It can provide a beneficial pattern for the energy-saving design and renovation of rural residences in Hanzhong area of China.

Make Full Advantage of New System - Research on the Design, Construction and Use of Low-Energy and Industrialized ICF House in Guanzhong Rural Areas of China

Energy Efficiency For Airtightness And Exterior Wall Insulation Of Passive Houses In Hot Summer And Cold Winter Zone Of China

Energy-efficiency Strategies of Residential Envelope in China’s Hot Summer–Cold Winter Zone Based on Intermittent Thermal Regulation Behaviour

Suitable and Energy-Saving Retrofit Technology Research in Traditional Wooden Houses in Jiangnan, South China

Rural Green Buildings for Energy Conservation and Environmental Quality in Hot Summer and Cold Winter Region:A Case Study of Fenshui,Tonglu,Zhejiang

The Methodology of Standard Building Selection for Residential Buildings in Hot Summer and Cold Winter Zone of China Based on Architectural Typology

The Method of Reducing Heat Loss from Thermal Bridges in Residential Buildings with Internal Insulation in the Hot Summer and Cold Winter Zone of China

A New Idea of Low-carbon Green Building System and Practice

Effect of advanced insulation materials and passive optimization strategies on interior thermal comfort of traditional houses in winter

Passive Energy-Saving Optimal Design for Rural Residences of Hanzhong Region in Northwest China Based on Performance Simulation and Optimization Algorithm

Design of Green Assembled Rural Houses in Xuzhou

Research on Environmental-Friendly Buildings with Low-Cost and Energy-Saving Technology in Cold Districts

Analysis of Energy Performance and Integrated Optimization of Tubular Houses in Southern China Using Computational Simulation

Feasibility Study and Passive Design of Nearly Zero Energy Building on Rural Houses in Xi’an, China

Energy Saving and Thermal Comfort Performance of Passive Retrofitting Measures for Traditional Rammed Earth House in Lingnan, China

A Review of Building Energy Retrofit Measures, Passive Design Strategies and Building Regulation for the Low Carbon Development of Existing Dwellings in the Hot Summer–Cold Winter Region of China

Optimization Analysis of the Residential Window-to-Wall Ratio Based on Numerical Calculation of Energy Consumption in the Hot-Summer and Cold-winter Zone of China

A Life-Cycle Carbon Emissions Evaluation Model for Traditional Residential Houses: Applying to Traditional Dong Dwellings in Qandongnan, Guizhou Province, China

Practical Exploration of Net-Zero Building Technology in Hot Summer and Cold Winter Regions—Qingdao Sino-German Eco-Park Longfor Guangnian Project As an Example

Feasibility of the Earthship Applying for New Rural Houses

Energy-saving reconstruction of buildings in cold winter and hot summer areas with the green ecological concept