Abstract:Relevance. The need to develop technological solutions to increase the competitiveness of pyrolysis processing of various wastes. Combustion of pyrolysis liquid in a mixture with coal is one of these solutions, which makes it possible to stabilize the properties of the obtained fuel and use in standard energy equipment. Aim. To determine the influence of the method of preparing a mixture of pyrolysis liquid and low-grade coal on its ignition and combustion characteristics, as well as on composition of the released gas-phase products, depending on the temperature of heating medium and concentration of the additive. Methods. Pyrolysis and oxidation characteristics were studied using thermogravimetric analysis, and formal kinetic constants were calculated using the Coates–Radfern method. Samples of mixed fuels were prepared by the methods of homogeneous mixing and surface wetting of pyrolysis liquid of rubber processing and low-grade coal. Ignition and combustion characteristics were determined using an experimental stand, and composition of gas-phase combustion products was determined using once-through gas analyzer. Results. The authors have determined the features of pyrolysis and oxidation of the pyrolysis liquid as well as the values of formal kinetics constants, indicating the physical nature of the factors that defining the rate of these processes. It was found that at 600 °C the ignition of the studied mixtures weakly depended on concentration of the additive, while at 700 and 800 °C the dependence was linear, and the differences between the samples prepared using different methods were insignificant. For samples obtained by the method of surface wetting, combustion of the additive occurred in the gas phase near the surface of the sample. For the samples obtained by the method of uniform mixing, it occurred predominantly in the bulk of the backfill. This led to more intense and complete coal combustion in these compositions due to more uniform releasing of heat and initiation of coal particles. The concentration curves of the NO, CO and CO2 release demonstrated, that behavior of the fuel mixture components was additive in terms of released gas-phase combustion products, as well as the absence of significant nonlinear effects over the entire studied range of temperatures and additive concentrations.

Effect of Diffusion of Coal Pyrolysis Products on the Ignition Characteristics and Conditions of Coal–Water Fuel Droplets

Effect of preparation method of pyrolysis liquid mixed with coal on its ignition and combustion characteristics

Numerical investigation of physicochemical effects of CO2 on coal particle ignition in O2/CO2 ambience

Effects of CO2 and H2O on coal pyrolysis with the ultrafast heating rate in a concentrating photothermal reactor

Experimental and theoretical analyses on ignition and surface temperature of dispersed coal particles in O2/N2 and O2/CO2 ambients

Pulverized Coal Stream Ignition Delay under Conventional and Oxy-Fuel Combustion Conditions

Effects of CO<sub>2</sub> and H<sub>2</sub>O on coal pyrolysis with the ultrafast heating rate in a concentrating photothermal reactor

Experimental Study on Ignition Delay and Reaction Characteristics of Zhundong Coal Particles in O2/CO2/H2O Atmosphere

Experimental Investigation on Characteristics of Coal Particle Stream Ignition Under Turbulent Condition

Puffing/micro-explosion in rapeseed oil/water droplets: The effects of coal micro-particles in water

The Effect of N2/CO2 Blend Ratios on the Pyrolysis and Combustion Behaviors of Coal Particles: Kinetic and Thermodynamic Analyses

Study on the Influence of Porous Gel on Coal Pyrolysis Performance Based on Experiments and Molecular Simulation

Study on the Formation and Dissipation Mechanism of Gas Phase Products During Rapid Pyrolysis of Superfine Pulverized Coal in Entrained Flow Reactor

Investigation of Steam Effect on Ignition of Dispersed Coal Particles in O-2/N-2 and O-2/CO2 Ambiences

Effects of Water Vapor on the Pyrolysis Products of Pulverized Coal

Influence of the type of woody biomass on energy and environmental characteristics of the thermal preparation processes and ignition of bio-water-coal fuel particles

Ignition of deflagration and detonation ahead of the flame due to radiative preheating of suspended micro particles

Numerical Analysis of the Ignition and Gas-Phase Flame Evolution of Pulverized Coal Based on Online Experimental Diagnostics

The effect of coal composition on ignition and flame stability in co-axial oxy-fuel turbulent diffusion flames

The effect of N 2 /CO 2 blend ratios on the pyrolysis and combustion behaviors of coal particles: Kinetic and thermodynamic analyses

Online characterization of pyrolysis products and kinetics study for the pyrolysis of a coal