Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Insight of the size dependent bioavailability and health risk assessment of arsenic in resuspended fly ash from power plants

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Deep insights on arsenic speciation and partition in coal-fired particles from micro to nano size

Risk assessment for the long-term stability of fly ash-based cementitious material containing arsenic: Dynamic and semidynamic leaching

Mineralogical transformation of arsenic at different copper smelting workshops: The impact on arsenic bioaccessibility

Using Nrf2/antioxidant Response Element-Dependent Signaling to Assess the Toxicity Potential of Fly Ash Particles.

Distribution of Arsenic in PM10 & PM2.5 Caused by Coal Combustion and Its Enrichment Mechanism

Stabilization and Remediation of Arsenic-Contaminated Soil: Fly Ash-Based Technology for Industrial Site Restoration

Re-using of coal-fired fly ash for arsenic vapors in-situ retention before SCR catalyst: Experiments and mechanisms

Ecological Risk Assessment and Influencing Factors of Heavy-Metal Leaching From Coal-Based Solid Waste Fly Ash

Morphochemical investigation on the enrichment and transformation of hazardous elements in ash from waste incineration plants

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

Source Identification and Exposure Risk Management for Soil Arsenic in Urban Reclamation Areas with High Background Levels: A Case Study in a Coastal Reclamation Site from the Pearl River Delta, China

Speciation analysis of Hg, As, Pb, Cd, and Cr in fly ash at different ESP’s hoppers

Determination of Inorganic Arsenic Speciation in Municipal Solid Waste Incineration Fly Ash by High Performance Liquid Chromatography-Hydride Generation-Atomic Fluorescence Spectroscopy with Phosphoric Acid as Extracting Agent

Bioavailability/speciation of arsenic in atmospheric PM2.5 and their seasonal variation: A case study in Baoding city, China

Concentration, speciation and risk effects of multiple environmentally sensitive trace elements in respirable fine-grained fly ash

Waste Control by Waste: Co-Treatment of Municipal Solid Waste Incineration Fly Ash and High Arsenic-Containing Wastewater

Resource Disposal and Products of Fly Ash from Domestic Waste Incineration in Zhejiang Province, China: Migration and Change of Hazardous Heavy Metals

Study of the Micromorphology and Health Risks of Arsenic in Copper Smelting Slag Tailings for Safe Resource Utilization.

Comparative Pollution Toxicity and Chemical Speciation of Heavy Metals in MSWI Fly Ash with Different Particle Size Distribution