Effect of shape memory alloy fiber content and preloading level on the self-healing properties of smart cementitious composite (SMA-ECC)

Weihong Chen,Boxu Lin,Kai Feng,Shuangshuang Cui,Dong Zhang

DOI: https://doi.org/10.1016/j.conbuildmat.2022.127797

IF: 7.4

2022-07-25

Construction and Building Materials

Abstract:Shape memory alloy (SMA) fibers are used in engineered cementitious composite (ECC) to achieve good self-healing properties in the newly developed smart cementitious material (SMA-ECC). This study focuses on the effect of SMA fiber content and preloading level on the self-healing properties of SMA-ECC through a two-stage four-point bending test. The self-healing effect was evaluated in terms of recovery of cracks, mechanical properties, and internal damage before and after self-healing. The results showed that the efficiency of the healing of cracks reduced with the increase in the width of the initial cracks. Cracks less than 50 μm width can be healed in SMA-ECC, while cracks larger than 200 μm width were the upper limit for the healing. The efficiency of the self-healing in terms of crack closure increased significantly with increasing SMA fiber content from 0.3% to 0.7% but did not change obviously when SMA fiber content increased from 0.7% to 1%. The recovery of flexural properties and damage decreased significantly with increasing preloading level. A high SMA fiber content was required for self-healing behavior at a high preloading level. At the pre-loading ratio of 50% and 70%, the recovery of flexural properties reached the maximum at the SMA fiber content of 0.7%. But at the pre-loading ratio of 90%, the recovery of flexural properties increased with increasing fiber content.

construction & building technology,materials science, multidisciplinary,engineering, civil