Abstract:The stereospecific design of the interface effects can optimize the electron/Li-ion migration kinetics for energy-storage materials. In this study, an electric field was introduced to silicon-based materials (C-SiOx@Si/rGO) through the rational construction of multi-heterostructures. This was achieved by manipulating the physicochemical properties at the atomic level of advanced Li-ion batteries (LIBs). The experimental and density functional theory calculations showed that the unbalanced charge distribution generated a large potential difference, which in turn induced a large-scale electric-field response with a boosted interfacial charge transfer in the composite. The as-prepared C-SiOx@Si/rGO anode showed advanced rate capability (i.e., 1579.0 and 906.5 mAh g–1 at 1000 and 8000 mA g–1, respectively) when the migration paths of the Li-ion/electrons hierarchically optimized the large electric field. Furthermore, the C-SiOx@Si/rGO composite with a high SiOx@Si mass ratio (73.5 wt %) demonstrated a significantly enhanced structural stability with a 40% volume expansion. Additionally, when coupled with the LiNi0.8Co0.1Mn0.1O2 (NCM) cathode, the NCM//C-SiOx@Si/rGO full cell delivers superior Li-ion storage properties with high reversible capacities of 157.6 and 101.4 mAh g–1 at 500 and 4000 mA g–1, respectively. Therefore, the electric-field introduction using optimized electrochemical reaction kinetics can assist in the construction of other high-performance LIB materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c01796?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c01796</a>.Additional experimental data, including the FTIR spectrum of SiOx@Si, β-CD, and β-CD/SiOx@Si; SEM of SiOx@Si and SiOx@Si/rGO; TEM with SEAD of SiOx@Si and SiOx@Si/rGO; XPS of different samples; EPR of different samples; SEM of the SiOx@Si electrode after cycling; Raman spectra of the C-SiOx@Si/rGO electrode after cycling; schematic illustration of the evolution of SiOx@Si and C-SiOx@Si/rGO electrodes during cycling; schematic diagram of the configuration of the full cell and the prelithiated process, and the electrochemical performance of different electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c01796/suppl_file/nn0c01796_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High reversible capacity silicon anode by segregated graphene-carbon nanotube networks for lithium ion half/full batteries

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Pomegranate-like silicon-based anodes self-assembled by hollow-structured Si/void@C nanoparticles for Li-ion batteries with high performances

A silicon/carbon/reduced-graphene composite of honeycomb structure for high-performance lithium-ion batteries

Reduced Graphene Oxide-Encaged Submicron-Silicon Anode Interfacially Stabilized by Al2O3 Nanoparticles for Efficient Lithium-Ion Batteries

Large-Scale Electric-Field Confined Silicon with Optimized Charge-Transfer Kinetics and Structural Stability for High-Rate Lithium-Ion Batteries

Advancing silicon-based Li-ion batteries: enhanced stability and performance through carbon-coated Si and rGO linkage

Micron SiO x encapsulated into amorphous B, N Co-doped carbon nanotube network for high-capacity and long-durable Li-ion half/full batteries

Dual carbon boosts silicon-based anodes for excellent initial coulombic efficiency and cycling stability of lithium-ion batteries

High Rate Capability and Long Cycling Life of Graphene-Coated Silicon Composite Anodes for Lithium Ion Batteries

Design of dual carbon encapsulated porous micron silicon composite with compact surface for enhanced reaction kinetics of lithium-ion battery anodes

Micron SiOx Encapsulated into Amorphous B, N Co-doped Carbon Nanotube Network for High-Capacity and Long-Durable Li-ion Half/full Batteries

A Novel Anode with Superior Cycling Stability Based on Silicon Encapsulated in Shell‐Like Rgo/cnt Architecture for Lithium‐Ion Batteries

Synthesis of Si/Fe2O3-Anchored rGO Frameworks as High-Performance Anodes for Li-Ion Batteries

Three-dimensional Carbon-Coated Si/rGO Nanostructures Anchored by Nickel Foam with Carbon Nanotubes for Li-ion Battery Applications

Synthesis and Electrochemical Performance of Electrostatic Self-Assembled Nano-Silicon@N-Doped Reduced Graphene Oxide/Carbon Nanofibers Composite as Anode Material for Lithium-Ion Batteries

Carbon-Coated Si Nanosheets as Anode Materials for High-Performance Lithium-Ion Batteries

Controllable Self-Assembly of Micro-Nanostructured Si-Embedded Graphite/Graphene Composite Anode for High-Performance Li-Ion Batteries

In-situ processing nano-porous silicon into 3D conductive structure as high-capacity anode for lithium-ion batteries

Synergetic Protection Hollow Silicon by Nitrogen-Doped Carbon/Reduced Graphene Oxide to Improve the Electrochemical Stability as Lithium-Ion Battery Anode

Ultrathin Si Nanosheets Dispersed in Graphene Matrix Enable Stable Interface and High Rate Capability of Anode for Lithium-ion Batteries