Abstract:Fibre-reinforced high-performance fly ash foam concrete (FHFC) has broad engineering application prospects owing to its lightweight and high-strength, energy-saving, heat preservation and environmental protection characteristics. Its mechanical properties and constitutive models can serve as an important basis for engineering structural design, numerical analysis and structural reliability monitoring. Aimed at exploring the influence of different factors on the physical and mechanical properties of FHFC and its stress–strain constitutive relationship, the dry density, cube compressive strength, splitting tensile strength and axial compressive strength of 27 groups of FHFC with different mixture proportions were measured and analysed. The primary and secondary relationships of the water–binder ratio, sand–binder ratio and replacement rate of fly ash to cement on the physical and mechanical properties of FHFC were studied. The failure mechanism of FHFC under uniaxial compression was discussed and a two-stage phenomenological constitutive model of FHFC was established through theoretical derivation. The results show that sand–binder ratio and water–binder ratio are the main factors affecting the physical and mechanical properties of FHFC. The stress–strain curve shows the characteristics of stages, namely, the elastic–plastic stage, the stress upswing stage, the plastic plateau stage and the failure stage. The influence of each factor on the elastic–plastic stage of the stress–strain curve shows obvious regularity, but the influence on the plastic stage is complex, and the regularity is not significant. The established two-stage phenomenological constitutive model is in good agreement with the stress–strain curve obtained from the test, and it can more accurately predict the uniaxial compression response of FHFC. The model can be used for the theoretical calculation of the bearing capacity of high-strength foam concrete structural members and even serve as an important basis for the engineering application of high-strength foam concrete. The influences of various factors on the performance of fibre-reinforced high-performance fly ash foam concrete were investigated. The uniaxial compression failure mechanism and stress–strain curve of fibre-reinforced high-performance fly ash foam concrete in different test groups were analysed. A two-stage phenomenological constitutive model suitable for fibre-reinforced high-performance fly ash foam concrete was established.

Experimental investigation on the dynamic mechanical properties and energy absorption mechanism of foam concrete

Experimental Research on Dynamic Mechanical Properties of High-Density Foamed Concrete

Experimental Study of Strength Characteristics of Foam Concrete

Improving energy absorption capacity of foam concrete with gradient and layered architecture

Experimental investigation on the anti-detonation performance of composite structure containing foam geopolymer backfill material

Study on the effectiveness of fibre reinforcement on the engineering performance of foamed concrete

Mechanical properties and constitutive model of fibre-reinforced high-performance class-F fly ash foam concrete

The Effect of Pore Structure on Impact Behavior of Concrete Hollow Brick, Autoclaved Aerated Concrete and Foamed Concrete

Dynamic impact compressive performance of expanded polystyrene (EPS)-foamed concrete

A Unified Analytical Model for Undrained Compressibility Behavior of Foam-Conditioned Coarse-Grained Soils Based on Effective Stress Analysis

Dynamic properties of low-density expandable polystyrene concrete materials

Strength, Durability, and Microstructure of Foamed Concrete Prepared Using Special Soil and Slag

Experimental Study on a Novel Steel-Pu Foam-Concrete-tube Multilayer Energy Absorbing Panel under Impact Loading

Strength Characteristics of Foam Concrete Under Uniaxial Compression

Experimental Investigation of the Dynamic Mechanical Properties of Polypropylene-Fiber-Reinforced Foamed Concrete at High Temperatures

Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures

Experimental investigation on the compressive behaviour of foam concrete light steel keel composite wall

Experimental Study and Numerical Simulation on Damping Property of Fiber Reinforced Concrete and Its Frame Structures

Experimental Study on Dynamic Splitting Characteristics of Carbon Fiber Reinforced Concrete

Experiment on mechanical properties of steel fiber reinforced concrete and application in deep underground engineering

Characterizing the foam-shell microstructure of industrial ultra-light foamed concrete cast under different temperatures