Abstract:The diversity of occupant air-conditioning (AC) behavior in buildings leads to significant discrepancies in building energy consumption. Thus, establishing models that reflect diverse realistic occupant AC behavior is crucial for the building performance simulations (BPS). Owing to the lack of large-scale samples, it is difficult to extract typical AC behavior patterns from existing studies. With advances in IT methods for data collection, large-scale on-site air-conditioning (AC) operation data of variable refrigerant flow (VRF) systems have become available. Therefore, based on the Big Data of 1200 indoor units (IDUs) of VRF systems, a novel method was proposed herein to establish realistic AC behavior models and extract typical patterns. The overall framework included three steps: data collection and preprocessing, large-scale occupant AC behavior model establishment, and typical behavior pattern extraction and evaluation. First, data preprocessing approaches were implemented to address data issues. Subsequently, based on Big Data, Bayesian parameter calibration was proposed to construct large-scale occupant AC behavior models. Afterwards, using the large-scale calibrated AC behavior models, the cooling demands of the population were simulated, and k-means clustering analysis was adopted to categorize the AC behavior into five groups representing different cooling demand levels and a typical model reflecting the group feature was selected. In the model validation, a hypothesis-based test was applied to confirm the validity of extracted typical patterns in reflecting the real distribution of district cooling demands. In the results, this study identified two occupancy patterns, i.e. "Daily occupied mode" (DOM) and "Night occupied mode" (NOM), and based on two occupancy types, five typical AC behavior patterns were extracted separately. From the typical patterns, it could be noticed that 90% of occupants had relatively low cooling demand less than 40 kWh/m2 during the cooling season. Moreover, comparing to the performance of fixed AC schedule model in district cooling demand evaluation, the extracted typical AC behavior patterns improved the accuracy up to 30.4% when calculating the bias between average modelled cooling demand and measured data. Additionally, the typical AC behavior models put forward in this study can be further integrated in BPS tools, which is promising for the simulation of cooling demand at building or district scale, and realizing AC technology evaluation in future engineering projects.

Non-intrusive power waveform modeling and identification of air conditioning load

A Novel Aggregated Modeling Method of Air Conditioning Loads

Aggregated Load Model of Inverter Air Conditioners Considering Low-Voltage Release

Load Modeling Including Air Conditioners

Component Based On-line Modeling for Electric Loads

Adaptive Non-Intrusive Load Monitoring Based on Feature Fusion

A Non-Intrusive Load Identification Method Based on Novel Data Acquisition Terminals and Model Fusion

Toward smart energy user: Real time non-intrusive load monitoring with simultaneous switching operations

Non-Intrusive Load Monitoring for Residential Appliances with Ultra-Sparse Sample and Real-Time Computation

A non-intrusive load decomposition method of resident by multi-scale attention mechanism

Data-driven and physical model-based evaluation method for the achievable demand response potential of residential consumers' air conditioning loads

A Method for Recognizing Electrical Appliances Based on Active Load Demand in a House/office Environment

Low-Complexity Non-Intrusive Load Monitoring Using Unsupervised Learning and Generalized Appliance Models

A Novel Denoising Auto-Encoder-Based Approach for Non-Intrusive Residential Load Monitoring

Adaptive modeling for Non-Intrusive Load Monitoring

Novel Approach to Typical Air-Conditioning Behavior Pattern Extraction Based on Large-Scale VRF System Online Monitoring Data

Implementation of scalable performance monitoring method for air conditioners

Non-intrusive load monitoring algorithm of residential users using limited low-frequency information

Non-intrusive multi-label load monitoring via transfer and contrastive learning architecture

Monitoring Time‐varying Residential Load Operation Modes: an Efficient Signal Disaggregation Approach

A multi-task learning model for non-intrusive load monitoring based on discrete wavelet transform