Abstract:Nanoparticles have become important in many applications. It is essential to be able to control the particle size because the properties of nanoparticles change dramatically with particle size. An efficient way to generate nanoparticles is via aerosol processes. In this study we used Liquid Flame Spray consisting of liquid precursor droplets sprayed into a high-speed hydrogen/oxygen flame where they evaporate, vapours react and nucleate to form titania nanoparticles. Using flame methods, also dopants and sensitizers can easily be introduced in order to, e.g. improve the photocatalytic activity of the nanomaterial. To obtain a practical guideline in order to tailor the final nanoparticle size in the process, we have systematically studied the effects of different process parameters on the particle size of titania. Titania is used, e.g. as a photocatalyst, and then both particle size and crystal structure are important when looking at the efficiency. In this work, the generated nanoparticle size has been measured by aerosol instrumentation and the particle morphology has been verified with transmission electron microscopy. In Liquid Flame Spray method, there are several adjustable parameters such as precursor feed rate into the flame; concentration of the precursor; precursor material itself as well as solvent used in the precursor; mass flow of combustion gases and also the mechanical design of the torch used. We used metal organic based titanium precursors in alcohol solvents, predominantly ethanol and 2-propanol. Large differences in particle production between the precursors were found. Differences could also be seen for various solvents. As for precursor feed in the flame, the more mass is introduced the larger the nanoparticles are, i.e. precursor concentration and precursor feed rate have an impact on particle size. A similar phenomenon can be discovered for the combustion gas flow rates. Torch design also plays an important role in controlling the particle size.

Effects of process parameters on preparation of Ti@SiO2 particles during fluidized bed chemical vapor deposition via design of experiments

Visible-Light-Driven Titania/Silica Photocatalyst Co-Doped with Boron and Ferrum

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Subatmospheric chemical vapor deposition ozone/TEOS process for SiO2 trench filling

Photocatalytic Surface Initiation for Area-Selective Chemical Vapor Deposition of Polymer Thin Film

The Effect of Calcination Temperature on the Structure and Activity of TiO2/SiO2 Composite Catalysts Derived from Titanium Sulfate and Fly Ash Acid Sludge

Synthesis of Core-Shell Nanostructured SiO2/TiO2 Photocatalysts Via Atomic Layer Deposition in a Fluidized Bed with Central Tube

Advanceson improving the attrition resistance of molecular sieve catalysts for fluidized bed

Comparison of SiO 2 /TiO 2 photocatalysts with different thicknesses synthesized by fluidized bed atomic layer deposition

Application and research progress of fluidized bed-chemical vapor deposition technology

Effect of Calcination Temperature on Crystal Structure and Photocatalytic Prop- Erty of TiO2/Diatomite Nanoparticles

Effect of calcination temperature on the structure and properties of SiO2 microspheres/nano-TiO2 composites

Synthesis of nano-sized TiC powders by designing chemical vapor deposition system in a fluidized bed reactor

Numerical investigation of particle size distribution, particle transport and deposition in a modified chemical vapor deposition process

The effect of process parameters on the Liquid Flame Spray generated titania nanoparticles

Mechanistic modeling study of atomic layer deposition process optimization in a fluidized bed reactor

Formation Process of the Integrated Core(Fe-6.5wt.%Si)@Shell(SiO2) Structure Obtained via Fluidized Bed Chemical Vapor Deposition

Preliminary simulation study of particle coating process by FB-CVD method using a CFD-DEM-PBM model

Studies on the Nano TiO2 Photocatalyst Performance Based on the SiC Foam Ceramics

Application of pulsed chemical vapor deposition on the SiO2-coated TiO2 production within a rotary reactor at room temperature

Effect of Calcination Temperature on the Structure, Crystallinity, and Photocatalytic Activity of Core-Shell SiO2@TiO2 and Mesoporous Hollow TiO2 Composites