Abstract:<p>Ultralow inter-wall interaction is realized in centimeter-long double-walled carbon nanotube (DWCNT) (Zhang, R. et al. Nat. Nanotech. 8, 912-916 (2013)). To further illustrate the mechanism of this special phenomenon, theoretical analysis combining with the experimental test is conducted, where study of the inter-tube interaction in the carbon nanotube bundles (CNTBs) is also included in this paper. In experiment, nanomanipulation difficulties of the ultra-long carbon nanotube (CNT)/CNTB is overcome by establishing a micro/nanoscale mechanical testing system (m/n-MTS), based on which the inter-wall/inter-tube interaction is firstly in-situ measured under optical microscope (OM). In theory, according to the bottom-up approach, a multi-scale model is developed specially, by which results obtained can be directly compared with the experimental data. The pull-out force consists of three parts: the boundary effect, the configuration force and the dynamic friction. The boundary effect can account for more than 70% when the pull-out velocity equals to 1 μm/s. The configuration force is greatly enhanced for the CNTB because of the commensurate configuration in the circumferential direction. The dynamic friction shows linear dependence on the pull-out velocity and relates to the overlapped area, which can be manifested when the pull-out velocity reaches to a dozen μm/s for the ultra-long DWCNT. The dynamic friction coefficient is proved to be 0.29 multiple of critical value based on the experiment data. The pull-out force in the CNTB is found far less than that in the DWCNT due to the greatly reduced contact area. Moreover, it can be deduced that the dynamic friction will show the same order of magnitude as the contribution from the boundary when the pull-out velocity equals to 10 μm/s or the length is 10 mm. This research reveals the underlying mechanism of the interaction, especially for the dynamic friction force exhibited in the ultra-long CNT/CNTB, and can provide help for designing devices with ultralow friction on macroscale.</p>

Study of interwall interaction during the pull separation of ultra-long double-walled carbon nanotubes under lateral loading

Multi-scale analysis of the interaction in ultra-long carbon nanotubes and bundles

Enhancement of pullout energy in a single-walled carbon nanotube-polyethylene composite system via auxetic effect

Transverse vibrations of double-walled carbon nanotubes under compressive axial load

Interwall Friction and Sliding Behavior of Centimeters Long Double-Walled Carbon Nanotubes.

Pullout Strength of Graphene and Carbon Nanotube/epoxy Composites

Modeling of carbon nanotube (CNT) interconnects

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Circuit Modeling and Performance Analysis of Multi-Walled Carbon Nanotube Interconnects

Influence of van der Waals force on the buckling of double-walled carbon nanotubes

A Study of Mechanical Peeling Behavior in A Junction Assembled by Two Individual Carbon Nanotubes

Tensile Loading Of Double-Walled And Triple-Walled Carbon Nanotubes And Their Mechanical Properties

Optimized Bearing And Interlayer Friction In Multiwalled Carbon Nanotubes

Buckling behaviors of single-walled carbon nanotubes inserted with a linear carbon-atom chain

A Cohesive Law for Interfaces Between Multi-Wall Carbon Nanotubes and Polymers Due to the Van Der Waals Interactions

Self-Folding Of Single- And Multiwall Carbon Nanotubes

Molecular dynamics simulation studies of mechanical properties of different carbon nanotube systems

A Theoretical Evaluation of Load Transfer in Multi-Walled Carbon Nanotubes

A Cohesive Law for Multi-Wall Carbon Nanotubes

Deformation Mechanisms of Very Long Single-Wall Carbon Nanotubes Subject to Compressive Loading

Investigating Interfacial Contact Configuration and Behavior of Single-Walled Carbon Nanotube-Based Nanodevice with Atomistic Simulations