Abstract:Because of their high molecular heat conductivity, low-Prandtl number liquid metal is a promising candidate coolant for various designs of advanced nuclear systems such as liquid metal–cooled fast reactors and accelerator-driven sub-critical system (ADS). With the fast-growing computational capacity, more and more attention has been paid to applying computational fluid dynamics (CFD) methods in thermal design and safety assessment of such systems for a detailed analysis of three-dimensional thermal–hydraulic behaviors. However, numerical modeling of turbulent heat transfer for low-Prandtl number liquid metal remains a challenging task. Numerical approaches such as wall-resolved large eddy simulation (LES) or direct numerical simulation (DNS), which can provide detailed insight into the physics of the liquid metal flow and the associated heat transfer, were widely applied to investigate the turbulent heat transfer phenomenon. However, these approaches suffer from the enormous computational consumption and are hence limited only to simple geometrical configurations with low to moderate Reynolds numbers. The Reynolds-averaged Navier–Stokes (RANS) approach associated with a turbulent Prandtl number Prt accounting for the turbulent heat flux based on Reynolds analogy is still, at least in the current state in most of the circumstances, the only feasible approach for practical engineering applications. However, the conventional choice of Prt in the order of 0.9∼unity in many commercial computational fluid dynamics codes is not valid for the low-Prandtl number liquid metal. In this study, LES/DNS simulation results of a simple forced turbulent channel flow up to a friction Reynolds number Reτ of 2000 at Pr of 0.01 and 0.025 were used as references, to which the Reynolds-averaged Navier–Stokes approach with varying Prt was compared. It was found that the appropriate Prt for the RANS approach decreases with bulk Peclet number Peb and approaches a constant value of 1.5 when Peb becomes larger than 2000. Based on this calibrated relation with Peb , a new model for Prt used in the RANS approach was proposed. Validation of the proposed model was carried out with available LES/DNS results on the local temperature profile in the concentric annulus and bare rod bundle, as well as with experimental correlations on the Nusselt number in a circular tube and bare rod bundle.

Heat Transfer From a Wedge to Fluids at Any Prandtl Number Using the Asymptotic Model

Correlating convection heat transfer for Falkner-Skan flow

Application of simplified threeGequation transition model in hypersonic flow

Numerical Analysis of the Micro-Couette Flow Using a Non-Newton–fourier Model with Enhanced Wall Boundary Conditions

High-Pr Heat Transfer in Viscoelastic Drag-Reducing Turbulent Channel Flow

Discussion on heat transfer correlation in turbulent channel flow imposed wall-normal magnetic field

A Comprehensive Evaluation of Turbulence Models for Predicting Heat Transfer in Turbulent Channel Flow across Various Prandtl Number Regimes

Development and Assessment of an Isotropic Four-Equation Model for Heat Transfer of Low Prandtl Number Fluids

Numerical Prediction of Laminar Flow and Heat Transfer in Wavy Channels of Uniform Cross-Sectional Area

Steady flow of non-Newtonian fluids: Momentum and heat transfer around a rectangular cylinder

Near-Wall Determination of the Turbulent Prandtl Number Based on Experiments, Numerical Simulation and Analytical Models

Heat transfer of couple stress fluid from a vertical funnel: Impedance boundary conditions

Data-driven algebraic models of the turbulent Prandtl number for buoyancy-affected flow near a vertical surface

Natural Convection Effects on Heat and Mass Transfer of Slip Flow of Time-Dependent Prandtl Fluid

Proposal of a turbulent Prandtl number model for Reynolds-averaged Navier–Stokes approach on the modeling of turbulent heat transfer of low-Prandtl number liquid metal

Effect of fluid elasticity and shear thinning on heat transfer from a heated sphere at moderate Reynolds numbers

Transient Convective Heat Transfer in Planar Stagnation Flows With Time-Varying Surface Heat Flux and Temperature

The Brinkman Model for Natural Convection about a Semi-Infinite Vertical Flat Plate in a Porous Medium

Predicting Buoyant Shear Flows Using Anisotropic Dissipation Rate Models

Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymptotic Model

Modulation of Turbulence Flux Budgets by Varying Fluid Properties in Heated High Prandtl Number Flow