Abstract:of this thesis V Abstract of this thesisof this thesis Chemistry in supercritical water (SCW) plays an increasingly important role in waste and energy conversion technologies presently under development. Examples for such processes are the supercritical water oxidation (SCWO) for the destruction of toxic wastes and the hydrothermal gasification of biomass, producing methane and hydrogen. The catalytic hydrothermal gasification of biomass – a process being developed at PSI – aims at producing a methane-rich product gas (synthetic natural gas, SNG) at low temperatures and is a prime example for catalysis in supercritical water. The efficiency of this process is currently limited by catalyst deactivation, mainly due to sulfur poisoning and fouling of the catalyst. Regeneration protocols will be necessary to enhance catalysts lifetime and therefore increase the overall process efficiency. Meeting these challenges requires a detailed understanding of reaction mechanisms at the interface between catalyst support, catalyst surface and reaction medium. The presented study aims at providing a fundamental understanding of the structure of ruthenium catalysts and reaction mechanisms under hydrothermal conditions, without which a knowledge-based approach to challenges like catalyst poisoning and regeneration of deactivated catalysts is not possible. Studying catalysis under SCW conditions is complicated by demanding experimental requirements and the need of applying spectroscopic methods with a sensitivity sufficient for probing the active phase of the catalyst, adsorbed species and possibly reaction intermediates. Thanks to the penetration depth of hard X-rays, X-ray absorption spectroscopy (XAS) is a powerful method for the determination of the electronic and geometric structure of nano-sized metal clusters under supercritical water conditions. A tubular, continuous flow reactor, made of ceramic aluminum nitride, was designed to perform in situ XAS under SCW conditions. The aluminum nitride tube allowed for sufficient X-ray transmission to enable acquisition of extended X-ray absorption fine structure (EXAFS) spectra of a ruthenium catalyst during the hydrothermal gasification of organic model compounds. From these spectra, structural information about catalyst composition and particle size could be derived. This structural analysis was combined with electronic structure calculations, obtained from density functional theory, and isotope labeling of VI Abstract of this thesis reactants and reaction products in order to establish structure-performance relationships for both active and sulfur poisoned catalysts. The combined results from XAS and isotope labeling show that the active phase of the Ru catalyst under reaction conditions is metallic, nano-sized Ru with an average particle size of 1.5 nm. The methanation reaction in SCW, vital for the production of SNG, proceeds via direct hydrogenation of (hydro-) carbon adsorbates on the Ru surface instead of the classic methanation pathway via carbon monoxide and hydrogen. These adsorbates are formed from the complete degradation of organic compounds on the active catalyst. Upon sulfur poisoning, the Ru surface was covered by irreversibly adsorbed sulfide species with a surface coverage of about 40%. This affected the formation of the (hydro-) carbon adsorbates on the Ru catalyst by diminishing its ability for biomass degradation via C-C, C-H and C-O bond breaking. Sulfur poisoning further affected the abundance of these adsorbates on the catalyst’s surface and as a result the selectivity of the methanation reaction. Based on the in situ XAS studies, protocols for an efficient removal of sulfur from the poisoned catalyst were developed. A liquid-phase oxidation of the sulfur poisoned catalyst at mild conditions was developed using hydrogen peroxide as an oxidizing agent. This treatment successfully removed sulfur from the catalyst’s surface, restoring the active catalyst phase, and shows promising potential for catalyst regeneration. In conclusion, mechanistic details of the conversion of organic compounds to methane in supercritical water could be clarified. This was largely supported by the development of a reactor that allows for in situ EXAFS studies under these conditions. The structural data was augmented by concomitant isotope labeling experiments, in combination with structure calculations, to provide a multi-facetted understanding of catalyst structure and catalytic reaction mechanisms. It is expected that the gained knowledge will help to further advance chemistry and conversion processes in hydrothermal media.

Catalysis in Supercritical Water Gasification of Biomass: Status and Prospects

Efficient and Stable Supercritical-Water-synthesized Ni-based Catalysts for Supercritical Water Gasification

A Review of the Design and Performance of Catalysts for Hydrothermal Gasification of Biomass to Produce Hydrogen-Rich Gas Fuel

Process in supercritical water gasification of coal: A review of fundamentals, mechanisms, catalysts and element transformation

Nickel nanocatalysts prepared via continuous supercritical hydrothermal synthesis for supercritical water gasification

Molecular Dynamics Simulations Guide the Gasification Process of Carbon-Supported Nickel Catalysts in Biomass Supercritical Water

Recent advances in supercritical water gasification of biowaste catalyzed by transition metal-based catalysts for hydrogen production

Catalytic mechanism study on the gasification of depolymerizing slag in supercritical water for hydrogen production

Catalysis under extreme conditions

Supercritical water gasification: practical design strategies and operational challenges for lab-scale, continuous flow reactors

Molecular Dynamics Investigation on the Lignin Gasification in Supercritical Water

Experimental study on supercritical carbon dioxide gasification of biomass

Supercritical water synthesized Ni/ZrO 2 catalyst and its application in the harmless treatment of oilfield wastewater in supercritical water

Conversion of kitchen waste effluent to H<sub>2</sub>-rich syngas via supercritical water gasification: Parameters, process optimization and Ni/Cu catalyst

Comprehensive experimental study on supercritical water gasification of oilfield sludge: Effect of operation parameters, and catalysts on the products

Applications of catalysts in thermochemical conversion of biomass (pyrolysis, hydrothermal liquefaction and gasification): A critical review

Mechanistic insights and catalytic enhancement of phenolic wastewater supercritical water gasification: A combined experiment and density functional theory study

Catalytic gasification of phenol in supercritical water over bimetallic Co–Ni/AC catalyst

For more and purer hydrogen-the progress and challenges in water gas shift reaction

Experimental Investigation of the Effects of Inorganic Components on the Supercritical Water Gasification of Semi-Coke