Abstract:Purpose: Endocavitary high intensity contact ultrasound (HICU) may offer interesting therapeutic potential for fighting localized cancer in esophageal or rectal wall. On-line MR guidance of the thermotherapy permits both excellent targeting of the pathological volume and accurate preoperatory monitoring of the temperature elevation. In this article, the authors address the issue of the automatic temperature control for endocavitary phased-array HICU and propose a tailor-made thermal model for this specific application. The convergence and stability of the feedback loop were investigated against tuning errors in the controller's parameters and against input noise, through ex vivo experimental studies and through numerical simulations in which nonlinear response of tissue was considered as expected in vivo. Methods: An MR-compatible, 64-element, cooled-tip, endorectal cylindrical phased-array applicator of contact ultrasound was integrated with fast MR thermometry to provide automatic feedback control of the temperature evolution. An appropriate phase law was applied per set of eight adjacent transducers to generate a quasiplanar wave, or a slightly convergent one (over the circular dimension). A 2D physical model, compatible with on-line numerical implementation, took into account (1) the ultrasound-mediated energy deposition, (2) the heat diffusion in tissue, and (3) the heat sink effect in the tissue adjacent to the tip-cooling balloon. This linear model was coupled to a PID compensation algorithm to obtain a multi-input single-output static-tuning temperature controller. Either the temperature at one static point in space (situated on the symmetry axis of the beam) or the maximum temperature in a user-defined ROI was tracked according to a predefined target curve. The convergence domain in the space of controller's parameters was experimentally explored ex vivo. The behavior of the static-tuning PID controller was numerically simulated based on a discrete-time iterative solution of the bioheat transfer equation in 3D and considering temperature-dependent ultrasound absorption and blood perfusion. Results: The intrinsic accuracy of the implemented controller was approximately 1% in ex vivo trials when providing correct estimates for energy deposition and heat diffusivity. Moreover, the feedback loop demonstrated excellent convergence and stability over a wide range of the controller's parameters, deliberately set to erroneous values. In the extreme case of strong underestimation of the ultrasound energy deposition in tissue, the temperature tracking curve alone, at the initial stage of the MR-controlled HICU treatment, was not a sufficient indicator for a globally stable behavior of the feedback loop. Our simulations predicted that the controller would be able to compensate for tissue perfusion and for temperature-dependent ultrasound absorption, although these effects were not included in the controller's equation. The explicit pattern of acoustic field was not required as input information for the controller, avoiding time-consuming numerical operations. Conclusions: The study demonstrated the potential advantages of PID-based automatic temperature control adapted to phased-array MR-guided HICU therapy. Further studies will address the integration of this ultrasound device with a miniature RF coil for high resolution MRI and, subsequently, the experimental behavior of the controller in vivo.

Temperature Feedback Control for Hyperthermia of Chest Wall Volumes With Dual-Frequency Ultrasound

Real-time non-invasive control of ultrasound hyperthermia using high-frequency ultrasonic backscattered energy in ex vivo tissue and in vivo animal studies

Fourier and Non-Fourier Bio-Heat Transfer Models to Predict Ex Vivo Temperature Response to Focused Ultrasound Heating

Endocavitary thermal therapy by MRI-guided phased-array contact ultrasound: experimental and numerical studies on the multi-input single-output PID temperature controller's convergence and stability

Photoacoustic-Based-Close-Loop Temperature Control for Nanoparticle Hyperthermia

Development and testing of a system for controlled ultrasound hyperthermia treatment with a phantom device

Temperature-Controlled Hyperthermia with Non-Invasive Temperature Monitoring Through Speed of Sound Imaging

Comparative Sensing and Judgment Control System for Temperature Maintenance for Optimal Treatment in Hyperthermic Intraperitoneal Chemotherapy Surgery

Direct thermal dose control of constrained focused ultrasound treatments: phantom and in vivo evaluation

Online feedback focusing algorithm for hyperthermia cancer treatment

Multiscale Effect of Localized Heating on the Global Temperature Response of a Human Body During Whole-Body Hyperthermia

Visualization of thermal washout due to spatiotemporally heterogenous perfusion in the application of a model-based control algorithm for MR-HIFU mediated hyperthermia

Thermostatic Hyperthermia with Non-invasive Temperature Monitoring through Speed of Sound Imaging

Adaptive Optimization on Ultrasonic Transmission Tomography-Based Temperature Image for Biomedical Treatment

Monitoring Temperature of A Heating Needle and Surrounding Blood During Interventional Whole Body Hyperthermia Therapy

Temperature Imaging with Ultrasonic Transmission Tomography for Treatment Control

Comprehensive Evaluation on the Heating Capacities of Four Typical Whole Body Hyperthermia Strategies Via Compartmental Model

Evaluation on the Capacity of Selectively Heating Vessel-Rich-skin to Realize Noninvasive Whole Body Hyperthermia

Influence of thermophysical and acoustic properties on temperature elevation at muscle/bone interface induced by ultrasound hyperthermia

Study of the temperature field in multilayer biological tissue using finite element method

Analysis for the dual-phase-lag bio-heat transfer during magnetic hyperthermia treatment