Abstract:Segregation of Mg-7Gd ingot solidified in the crucible directly was studied.Gd content at ingot bottom melted by resistance furnace reached 15.05 wt.%.Two formation mechanisms were proposed for the specific gravity segregation.The difference of Gd content in ingot after melt treatment was 0.23 wt.%.Excessive stirring speed decreased the composition homogenization.Specific gravity segregation that occurs during the smelting process always leads to the low composition homogeneity and poor performance stability of the magnesium-rare earth (Mg-RE) alloys. In this study, the segregation behavior of Mg-Gd alloy was investigated by sampling from different locations in the ingot fabricated by a resistance furnace without a pouring process. The combined application of induction-heating and mechanical stirring with various speeds (0–130 r/min) was applied to promote the distribution homogeneity of Gd atoms. In the resistance-heating fabricated ingot, Gd content at the bottom section reaches 407% of that at the top. The coarse dendrites surrounded by the network-like eutectic structures are responsible for the brittle fracture with a poor elongation of 3.7%. By the combined employment of the induction heating and mechanical stirring with the speed of 87 r/min at 740 °C for 40 s, the variation of the Gd content within the whole ingot can be reduced to be the minimum of 0.23 wt%. Corresponding formation and regulating models of segregation were also proposed. However, the cooling rate of the melt is reduced by the continuous increase of the stirring speed to 130 r/min, which results in the grain coarsening and lower homogeneity of the ingot.The combined application of induction-heating and mechanical stirring inhibits the formation of specific gravity segregation generated in Mg-Gd alloy melt, leading to the minimum variation of 0.23 wt% in Gd content and microstructural homogeneity within the whole ingot.Download : Download high-res image (393KB)Download : Download full-size image

Segregation and clustering of solutes at grain boundaries in Mg–rare earth solid solutions

Exploring Solute Behavior and Texture Selection in Magnesium Alloys at the Atomistic Level

Periodic linear complexions: Co-segregation of solutes at a low-angle grain boundary in a magnesium alloy

Segregation behavior and its regulating process in as-cast magnesium alloy containing heavy rare earth

Grain boundary segregation spectrum in basal-textured Mg alloys: From solute decoration to structural transition

Effect of Rare-Earth Additions on the Texture of Wrought Magnesium Alloys: The Role of Grain Boundary Segregation

Grain boundary and twin boundary solute segregations in nanocrystalline Al-Mg alloy

Predicting Grain Boundary Segregation in Magnesium Alloys: An Atomistically Informed Machine Learning Approach

The effect of rare earth element segregation on grain boundary energy and mobility in magnesium and ensuing texture weakening

Nonsymmetrical Segregation of Solutes in Periodic Misfit Dislocations Separated Tilt Grain Boundaries

First-principles investigation of the Mg, Cu segregation at Al Σ5 (310) and Σ9 (221) symmetrical tilt grain boundaries

Atomistic simulations and machine learning of solute grain boundary segregation in Mg alloys at finite temperatures

Dislocation-induced Y segregation at basal-prismatic interfaces in Mg

Segregation of Yttrium at the Mg/MgO Interface in an Mg-0.5Y Alloy

Grain boundary solute segregation across the 5D space of crystallographic character

First-principles study of solute atoms segregation in Al Σ5(210) metastable grain boundaries

Solute Induced Defect Phase Transformations in Mg Grain Boundaries

Atomic-scale inhomogeneous solute distribution in an ultrahigh strength nanocrystalline Al-8 Mg aluminum alloy

Effect of dynamic recrystallization, LPSO phase, and grain boundary segregation on heterogeneous bimodal microstructure in Mg-9.8Gd-3.5Y-2.0Zn-0.4Zr alloy

First-principles Study on Solute-Basal Dislocation Interaction in Mg Alloys