Thermal, Pasting and Gel Textural Properties of Commercial Starches from Different Botanical Sources

Li Shujing,Zhang Yingquan,Wei Yimin,Zhang Wei,Zhang* Bo,Yingquan Zhang

DOI: https://doi.org/10.4172/2155-9821.1000161

2014-01-01

Abstract:The applications of starch in food systems are primarily governed by its gelatinization, pasting, solubility, swelling

What problem does this paper attempt to address?

Pasting, Gelatinization, and Retrogradation Characteristics Related to Structural Properties of Tea Seed Starches

Lisheng Qian,Yao,Cheng Li,Feifei Xu,Yinin Ying,Zongqing Shao,Jinsong Bao

DOI: https://doi.org/10.1016/j.foodhyd.2021.106701

IF: 10.7

2021-01-01

Food Hydrocolloids

Abstract:The fine structure-function (physicochemical properties) relationships of tea seed starches from seven cultivars were investigated. Tea seed starch granules were small size (2.4?11.8 ?m) and round with an A-type X-ray diffraction pattern. The amylose content (AC) ranged from 29.8 to 33.5%, and was positively correlated with setback viscosity (SB), but not correlated with the gel hardness (HD). The peak gelatinization temperature (Tp) was low (67 ?C) for one cultivar while intermediate (71?74 ?C) for the others. AC was also negatively correlated with the relative crystallinity (RC) of tea starches. The amount of long B chains and average chain length of amylopectin were positively correlated with RC, which determined the Tp. The relative length of amylopectin peak 2 (XAP2) was negatively correlated with SB. The amount of amylopectin A chains showed a negative correlation with HD and hot paste viscosity (HPV). The current findings will be helpful to increase the understanding of tea seed starch quality for its application in food processing.
Interrelating Grain Hardness Index of Wheat with Physicochemical and Structural Properties of Starch Extracted Therefrom

Derang Ni,Fan Yang,Lin Lin,Chongde Sun,Xingqian Ye,Li Wang,Xiangli Kong

DOI: https://doi.org/10.3390/foods11081087

2022-01-01

Abstract:To investigate the physicochemical, structural, and rheological characteristics of starch from wheat cultivars varying in grain hardness index employed in making jiuqu and to interrelate grain hardness index with physicochemical and structural properties of starch. Starch extracted therefrom was investigated for structural and physicochemical properties. Starch granules showed relatively wide granule size distribution; large size granules showed lenticular shapes while medium and small size granules exhibited spherical or irregular shapes. Starch from wheat with a lower grain hardness index exhibited a relatively higher degree of crystallinity. Chain-length profiles of amylopectin showed distinct differences; among the fractions of fa, fb(1), fb(2), and fb(3 )representing the weight-based chain-length proportions in amylopectin, the fa fractions ranged from 19.7% to 21.6%, the fb(1) fractions ranged from 44.4% to 45.6%, the fb(2) fractions ranged from 16.2% to 17.0%, and the fb(3) fractions ranged from 16.1% to 18.8%, respectively. T-o, T-p, T-c, and Delta H of starch ranged from 57.8 to 59.7 degrees C, 61.9 to 64.2 degrees C, 67.4 to 69.8 degrees C, and 11.9 to 12.7 J/g, respectively. Peak viscosity, hot pasting viscosity, cool pasting viscosity, breakdown, and setback of starch ranged from 127 to 221 RVU, 77 to 106 RVU, 217 to 324 RVU, 44 to 116 RVU, and 137 to 218 RVU, respectively. Both G' and G '' increased in the frequency range of 0.628 to 125.6 rad/s; the wheat starch gels were more solid-like during the whole range of frequency sweep.
Effects of Starches from Different Botanical Sources and Modification Methods on Physicochemical Properties of Starch-Based Edible Films

Limin Dai,Jun Zhang,Fang Cheng

DOI: https://doi.org/10.1016/j.ijbiomac.2019.03.197

IF: 8.2

2019-01-01

International Journal of Biological Macromolecules

Abstract:The effects of starches from different botanical sources (waxy corn, cassava, sweet potato, potato, wheat, and corn) and different commercial modified cassava starches (esterified cassava starch, cross-linked cassava starch, and oxidized cassava starch) on the physicochemical properties of starch-based films prepared by solution casting method were investigated. The mildew resistance test showed that the cassava starch (CAS) film-forming dispersion had the best mildew resistance and all the modified starch film-forming dispersions had less mildew resistance than that of the native starch film-forming dispersion. The color and transparency of the films depended on the plant sources and modification methods of the starch. Fourier transform infrared (FTIR) analysis verified the formation of hydrogen bonds between the starch and plasticizer (glycerol) and possible sites for hydrogen bonds on the starch. The atomic force microscope (AFM) results showed that the surface of all starch films was homogeneous except waxy corn starch (WCS) film, wheat starch (WS) film, and corn starch (CS) film. Mechanical properties and water vapor permeability (WVP) tests suggested that CAS film had the best comprehensive properties in native starches. For modified cassava starches, the comprehensive properties of the cross-linked CAS film were better than those of other modified CAS films.
Physicochemical and Structural Characteristics of Starches from Chinese Hull‐less Barley Cultivars

Xiangli Kong,Stefan Kasapis,Ping Zhu,Zhongquan Sui,Jinsong Bao,Harold Corke

DOI: https://doi.org/10.1111/ijfs.12984

IF: 3.3

2015-01-01

International Journal of Food Science & Technology

Abstract:SummaryFourteen hull‐less barley cultivars, collected from four major cultivated areas in China, were employed to investigate the structural and physicochemical properties of their starches in this study. Relatively wide variations in physicochemical properties of the starches were observed. Amylose content ranged from 23.1% to 30.0%, swelling power and water solubility index ranged from 12.8 to 19.9 g g−1 and 12.7% to 23.7% respectively. Peak viscosity was from 170 to 346 Rapid Visco Unit (RVU), peak temperature (Tp) of starch gelatinisation was from 55.6 to 61.8 °C and enthalpy of starch retrogradation ranged from 0.3 to 3.1 J g−1. Weight‐based chain‐length proportions of fa, fb1, fb2 and fb3 in amylopectins ranged from 21.65% to 24.95%, 44.48% to 49.44%, 15.56% to 17.19% and 9.83% to 16.66% respectively. Correlation analyses showed that amylose content was inversely related to pasting parameters and enthalpy of gelatinisation. Pasting properties and amylopectin structures were the most important parameters to differentiate starch properties among different hull‐less barley cultivars in this study. This work will be useful for exploring applications of Chinese hull‐less barley starches in food and non‐food industries.
Fine Structure and Gelatinization and Pasting Properties Relationships among Starches from Pigmented Potatoes

Chuan Tong,Sulaiman Ahmed,Yuehan Pang,Xin Zhou,Jinsong Bao

DOI: https://doi.org/10.1016/j.foodhyd.2018.04.036

IF: 10.7

2018-01-01

Food Hydrocolloids

Abstract:Chain length distribution (CLD) is one of fine structural parameters of starch, playing significant roles in determining starch physicochemical properties. In this study, six pigmented potato cultivars were used to explore the relationship between starch structural properties and starch functional properties. It was found that the amylose content, the peak height of amylose (hAM) and the first peak height of amylopectin (hAP1) significantly differed, whereas the other structure parameters had small variations among the potato starches. The average length of amylopectin side chains varied from 24.8 to 26.4 degree of polymerization (DP), and fractions fa, fb1, fb2 and fb3 of amylopectin showed no significant difference. A wide variation in the starch pasting and thermal properties was observed. Correlation analysis indicated that the pasting properties were affected by the fine structures of both amylose and amylopectin, while the thermal properties were only affected by the amylopectin fine structure. These results contribute to our understanding the structure-function relationships among potato starches.
Gelatinization, Pasting and Retrogradation Properties and Molecular Fine Structure of Starches from Seven Cassava Cultivars.

Piengtawan Tappiban,Yining Ying,Yuehan Pang,Supajit Sraphet,Nattaya Srisawad,Duncan R. Smith,Peng Wu,Kanokporn Triwitayakorn,Jinsong Bao

DOI: https://doi.org/10.1016/j.ijbiomac.2020.02.119

IF: 8.2

2020-01-01

International Journal of Biological Macromolecules

Abstract:Genetic diversity in the physicochemical properties and fine structures of seven cassava starches samples was studied. The apparent amylose content ranged from 24.8 to 27.6%. The whole branched starches showed significant differences in average hydrodynamic radius, ranging from 53.35 to 58.45 nm, while debranched starch exhibited differences in degrees of polymerization and height of both amylose and amylopectin peaks. The molecular size of amylose and amylopectin was positively correlated. The amount of short chains fa (6 <= X <= 12) and fb1 (13 <= X <= 24) had significant differences among the cultivars. Structure-function relation analysis indicated that the CPV and SB were mainly determined by amylopectin fine structures, BD, PTi and Tp and retrogradation properties were mainly determined by the amylose fine structure, while PTe and To were mainly affected by both amylose and amylopectin fine structures. The current findings will be helpful to improve the understanding cassava starch quality for use in industrial starch applications. (C) 2020 Elsevier B.V. All rights reserved.
Effects of Starch Addition on KGM Sol's Pasting, Rheological Properties, and Gel Texture

Liling Deng,Yan Li,Geng Zhong,Wen Lei,Yongbo Peng,Zhaojing Zhu

DOI: https://doi.org/10.1021/acsomega.3c02265

IF: 4.1

2023-09-25

ACS Omega

Abstract:Konjac tofu is an irreversible gel formed by removing the acetyl group from konjac glucomannan (KGM) through alkaline heating. This type of food is low in calories, filling, and healthy, making it popular in the market. However, pure konjac tofu has a hard texture and lacks flavor when heated. To improve its taste and appearance, the effects of three varieties of native starch, including corn starch (CS), Canna edulis Ker starch (CKS), and potato starch (PS), on the formation of pasting and...

chemistry, multidisciplinary
Characterization and Correlation Analysis of Physico-chemical Properties of Starch from Different Potato Cultivars

Lan WANG,Si-chen REN,Xin DU,Jun WANG,Wei CHENG,Zhi-da SUN,Guang-quan XIONG

2010-01-01

Abstract:Potato starch has some special properties,which contribute to its versatile utilization and application potential.Starches from different sources have different physico-chemical and functional properties.In this work,eight potato cultivars were extracted to obtain starch,and the extracted starches were subjected to characterization and correlation analysis of physicochemical properties such as chemical composition,swelling power,solubility and thermal and rheological properties.Potato starch crystallinity was negatively correlation with temperature at storage modulus peak and swelling power,respectively.The contents of amylose and phosphorus were both positively correlated with temperature at storage modulus peak,storage modulus peak,transition temperature(onset,To;peak,Tp;and conclusion,Tc) but negatively correlated with crystallinity.Furthermore,a negative correlation between amylase content and gelatinization enthalpy was also observed.
Thermal and Rheological Properties of Starch-Based Materials

F. S. Liu,K. Lu,Z. Z. Shao,K. L. Shi,X. Y. Lin,H. S. Liu,L. Yu

DOI: https://doi.org/10.1088/1757-899x/479/1/012006

2019-01-01

IOP Conference Series Materials Science and Engineering

Abstract:From application-oriented point of view, in order to decrease the cost of transportation the starch-based form was prepared by two steps: 1) compounding; and 2) foaming. That is because the foamed materials consist of more than 90% gas, the transportation cost could be higher than foam itself. In this work, starch-based pallets used for foaming were developed by extrusion. This presentation focuses on thermal and rheological properties of the starch-based materials. Cornstarch was used in this work. The results showed that the gelatinization temperature of the cornstarch was about 68°C with excess water content. The shear thin rheological behavior was observed for the cornstarch. Based on these the extrusion condition were designed and developed. In order to avoid foaming during compounding the temperature should be controlled less than 100°C. The higher screw speed can reduce the processing energy.
Gelatinization, Rheological and Retrogradation Behaviors of Waxy Rice Starch Affected by Gelatin Emulsion and Regulation Mechanism

Yawen Zhan,Hongjie Dai,Liang Ma,Yuhao Zhang

DOI: https://doi.org/10.1016/j.foodhyd.2024.110649

IF: 10.7

2025-01-01

Food Hydrocolloids

Abstract:The influences of various gelatin emulsion additions on gelatinization, rheology, retrogradation and structural properties of waxy rice starch (WRS) were investigated. The gelatin emulsion was uniformly dispersed in the starch pastes, which increased the particle size through agglomerating around the starch powder particles. As gelatin emulsion content increased, the pasting viscosity of WRS pastes significantly increased (P < 0.05), whereas its setback value, gelatinization and retrogradation enthalpy decreased. Rheological measurements indicated that the addition of gelatin emulsion did not change the shear thinning behavior of WRS pastes blends, and the storage modulus and loss modulus were positively correlated with gelatin emulsion content. During the heating stage of the pasting process, the interfacial organization consisting of gelatin undergoes disintegration and melting, reconfiguring the emulsion system. Gelatin dispersed in the interfacial and continuous phases interacts with starch to form hydrogen bonds and inhibit starch rearrangement. The starch-lipid complex formed by the interaction between lipids released from emulsion and starch is capable of destroying the crystalline region. Therefore, after 14 d of storage at 4 C-degrees, the relative crystallinity of WRS decreased by 72.4 % as the gelatin emulsion addition was increased from 0 % to 14 %. The addition of gelatin emulsion induced the formation of steric hindrance effects, which impeded the mobility of water molecules and improved freeze-thaw stability. These results may contribute to the creation of high-quality and innovative water-oil-starch mixture food products that remain fresh for a longer period.
Effect of Starch Molecular Structure on Precision and Texture Properties of 3D Printed Products

Shengyang Ji,Tao Xu,Ye Li,Hongyan Li,Yongheng Zhong,Baiyi Lu

DOI: https://doi.org/10.1016/j.foodhyd.2021.107387

IF: 10.7

2021-01-01

Food Hydrocolloids

Abstract:This work evaluated the influence of starch molecular structure on the precision and textural properties of 3D printed products. Results showed that starch gels with higher content of short amylopectin (AP) chains for 13 < X < 24, the degree of polymerization at peak maximum of amylose (AM) chains (XAM), and AM chains for 5000 < X < 20000 facilitated the rheological properties of starch gels, which in turn promoted their smooth extrusion in the 3D printing process. Small average molecular size of whole starch (?Rh) and the high proportion of amylose chains for 100 < X < 1000 of starch which was related to water distribution of starch gels were beneficial to the accuracy of 3D printed products. The proportion of AP chains for 6 < X < 24 and AM chains for 5000 < X < 20000 had significant negative and positive correlations with the hardness and resilience of the 3D printed products, respectively. This study provides useful information for the application of 3D printing in starchbased food production.
Effect of Shearing and Annealing on the Pasting Properties of Different Starches

Abdellatif A. Mohamed,Mohamed Saleh Alamri,Hesham Al-Quh,Shahzad Hussain,Mohamed A. Ibraheem,Abdur Rehman,Akram A. Qasem

DOI: https://doi.org/10.3390/gels10060350

IF: 4.6

2024-05-22

Gels

Abstract:The functional characteristics of starch can be altered by shear force, which makes the impact on its microstructure of great importance to the food industry. This study investigated the effects of freeze-drying on the gel texture, pasting capabilities, and swelling power of starches made from sweet potatoes (SP), chickpeas (CP), and wheat (WS) combined with Cordia (CG) and Ziziphus gum (ZG). The samples were annealed in water without shearing and in a rapid visco-analyzer (RVA) for 30 min at 60 °C while being spun at 690 rpm. Both native and freeze-dried samples were mixed with 1% or 3% ZG and CG. After annealing, the starches were examined using a texture analyzer and RVA. The results showed that freeze-drying had a substantial (p > 0.05) impact on the starch granule, in addition to the effect of annealing. The peak viscosity of freeze-dried native CP and SP starches increased, but the peak viscosity of freeze-dried wheat starch decreased. The setbacks for CP and WS increased, whereas the setbacks for SP varied slightly. Furthermore, it was demonstrated that annealing in an RVA exhibited a substantially lower peak viscosity than annealing in a water bath; the RVA's shearing effect may have been the cause of this difference. Cordia gum fared better than ZG in terms of peak viscosity, although ZG significantly reduced setback in comparison to CG. Among the various blends, the native WB sample had the lowest hardness (100 ± 4.9 g), while the freeze-dried WB SP sample had the greatest (175.5 ± 4.8 g). Shearing of starches broke up the granules into smaller pieces, which made them gel at lower temperatures. This could be a good thing when they are needed for food uses that require little cooking.

polymer science
Physicochemical Characterizations of Five Dioscorea Alata L. Starches from China

Shuo Jiang,Jinxi Cen,Yufeng Zhou,Yin Wang,Dianxing Wu,Zhi'an Wang,Jian Sun,Xiaoli Shu

DOI: https://doi.org/10.1016/j.ijbiomac.2023.124225

IF: 8.2

2023-01-01

International Journal of Biological Macromolecules

Abstract:D. alata is an important edible and medicinal plant in China. Its tuber is rich in starch but the understanding of the physiochemical properties of D. alata starch is limited. In order to explore the processing and application potential of different D. alata accessions in China, five kinds of D. alata starch (LY, WC, XT, GZ, SM) were isolated and characterized. The study showed that D. alata tubers contained abundant starch, enriched in amylose and resistant starch (RS). D. alata starches showed B-type or C-type diffraction pattern, had higher RS content and gelatinization temperature (GT), lower fa and viscosity when compared to D. opposita, D. esculenta, and D. nipponica. Among D. alata starches, D. alata (SM) showing the C-type diffraction pattern, had the lowest proportion of fa with 10.18 %, the highest amylose, RS2 and RS3 content of 40.24 %, 84.17 % and 10.48 % respectively, and the highest GT and viscosity. The results indicated that D. alata tubers are potential sources for novel starch with high amylose and RS content, and provided a theoretical basis for further utilizations of D. alata starch in food processing and industry application.
Understanding the Supramolecular Structures and Pasting Features of Adlay Seed Starches

Lange Miao,Siming Zhao,Binjia Zhang,Manman Tan,Meng Niu,Caihua Jia,Qilin Huang

DOI: https://doi.org/10.1016/j.foodhyd.2018.05.034

IF: 10.7

2018-01-01

Food Hydrocolloids

Abstract:This work concerns the multi-scale supramolecular structures and physicochemical properties of two small adlay seed starches (Q-2 and P-6) and a big adlay seed starch (BW). Among the three starches, P-6 exhibited unique hierarchical structures and thus thermal and pasting properties. The underlying mechanism on starch property differences was discussed from a hierarchical (multi-scale) structural view. Specifically, P-6 possessed the lowest granule size, the intermediate lamellar thickness and compactness, and the highest contents of helices and crystallites with a relatively high flaw degree. These multi-scale structures were most susceptible to hydrothermal effects, eventually showing the lowest thermal transition and pasting temperatures. Also, this sample had the highest paste viscosities related to the swelling degree of starch granules and the water-holding ability of starch molecules. The shell of the fully swelled granules (granule ghosts) for P-6 were most robust under shearing and heating, resulting in the lowest breakdown viscosity (i.e., the highest paste stability during heating). The strongest assembly capacity for the starch chains of P-6, as indicated by its highest content of orders in untreated granules, induced a prominent increase in the paste viscosity during cooling. The results here indicate that P-6 may serve as functional agents such as thickeners with low pasting temperature as well as high viscosity and high paste stability under shearing and heating.
Physical Properties Of Amaranthus Starch

Xiangli Kong,Jinsong Bao,Harold Corke

DOI: https://doi.org/10.1016/j.foodchem.2008.06.028

IF: 8.8

2009-01-01

Food Chemistry

Abstract:Physicochemical and functional properties of starches isolated from fifteen grain amaranth cultivars (Amaranthus spp.) produced in China were analysed in this study. Amaranth starches had low but diverse amylose contents, ranging from 4.7% to 12.5%. Wide variation was also found in physicochemical properties, such as swelling power, water solubility index, pasting, thermal and textural properties. Amylose content was significantly correlated with functional properties, including pasting, thermal and textural properties and appeared to be the important determinant for these properties. Correlations among pasting, thermal and textural parameters were also significant. Principal component analysis using 17 variables extracted four principal components that explained 88% of the total variance. The first component represented amylose content, pasting and gel textural properties and explained 59% of the total variance, while the second component represented the thermal properties and accounted for an additional 14.5% of the total variance. (c) 2008 Published by Elsevier Ltd
Thermal properties of different types of starch: A review

M. Yashini,S. Khushbu,N. Madhurima,C. K. Sunil,R. Mahendran,N. Venkatachalapathy

DOI: https://doi.org/10.1080/10408398.2022.2141680

IF: 11.208

2022-11-04

Critical Reviews in Food Science and Nutrition

Abstract:Starch is present in high amount in various cereals, fruits and roots & tubers which finds major application in industry. Commercially, starch is rarely consumed or processed in its native form, thus modification of starch is widely used method for increasing its application and process stability. Due to the high demand for starch in industrial applications, researchers were driven to hunt for new sources of starch, including modification of starch through green processing. Thermal properties are significant reference parameters for evaluating the quality of starch when it comes to cooking and processing. Modification of starches affects the thermal properties, which are widely studied using Differential scanning calorimeter or Thermogravimetric analysis. It could lead to a better understanding of starch's thermal properties including factors influencing and expand its commercial applications as a thickener, extender, fat replacer, etc. in more depth. Therefore, the review presents the classification of starches, factors influencing the thermal properties, measurement methods and thermal properties of starch in its native and modified form. Further, this review concludes that extensive research on the thermal properties of new sources of starch, as well as modified starch, is required to boost thermal stability and extend industrial applications. Graphical

food science & technology,nutrition & dietetics
Thermal, Rheological, Structural and Adhesive Properties of Wheat Starch Gels with Different Potassium Alum Contents

Haibo Zhao,Hongbin Zhang,Qiang Xu,Hongdong Zhang,Yuliang Yang

DOI: https://doi.org/10.3390/molecules28186670

IF: 4.6

2023-09-17

Molecules

Abstract:Wheat starch (WS) is a common adhesive material used in mounting of calligraphy and paintings. Potassium alum (PA) has indeed been used for many centuries to modify the physicochemical properties of starch. Thermal analysis revealed that the presence of PA led to an increase in the gelatinization temperature and enthalpy of the starch gels. The leached amylose and the swelling power of the starch gels exhibited a maximum at the ratio of 100:6.0 (WS:PA, w/w). The rheological properties of starch gels were consistent with changes in the swelling power of starch granules. SEM observations confirmed that the gel structure became more regular, and the holes grew larger with the addition of PA below the ratio of 100:6.0 (WS:PA, w/w). The short-range molecular order in the starch gels was enhanced by the addition of PA, confirmed by FT-IR analysis. Mechanical experiments demonstrated that the binding strength of the starch gels increased with higher PA concentrations and decreased significantly after the aging process. TGA results revealed that PA promoted the acid degradation of starch molecules. This study provides a detailed guide for the preparation of starch-based adhesive and its applications in paper conservation.
Recent Advances in Rheological Properties of Starch Paste

LI Jian-bin,LI Lin,CHEN Ling,LI Bing,FU Quan-yi

DOI: https://doi.org/10.3321/j.issn:1002-6630.2008.11.161

2008-01-01

Abstract:A review was made on the recent research advances in the rheological properties of starch paste and modified starch paste.The research results of various influence factors and the influence of different physical and chemical modification methods on rheological properties of starch paste were introduced.The research of various influence factors on rheological properties of starch paste should be focused on in the future,and their influence rules should be obtained as quickiy as possible in order to explore the broad application prospects of starch.
Effect of Starch on Properties of Instant Fish Vermicelli

Li Debao,Zhu Zhiwei

2009-01-01

Abstract:The effects of five different starches(corn starch,tapioca starch,sweet potato starch,potato starch and potato acetate starch)on the properties of instant fish vermicelli was investigated.The relation between the physical properties of the starch and the properties of instant fish vermicelli was also studied.The results showed that potato starch was the best.The content of amylose,transparency,retrogradation,swelling power and stability of cold and hot paste of starch affected the properties of the instant fish vermicelli remarkably.However,solubility and gel strength of the starch had no significant influence.The conclusion was the starch with low content of amylose,high transparency and swelling power,little retrogradation and good stability of cold and hot paste was suitable for manufacturing instant fish vermicelli.
Thermal and rheological properties of breadfruit starch.

Xueyu Wang,Ling Chen,Xiaoxi Li,Fengwei Xie,Hongshen Liu,Long Yu

DOI: https://doi.org/10.1111/j.1750-3841.2010.01888.x

IF: 3.9

2011-01-01

Journal of Food Science

Abstract:The thermal and rheological properties of breadfruit starch were studied using DSC and 2 different rheometers. It was found that the gelatinization temperature of starch with excess moisture content (>70%) was at approximately 75 degrees C. A new endotherm was detected at about 173 degrees C when the moisture content was lower than required for full gelatinization of the starch. A detailed examination revealed that this endotherm represented the melting of amylose-lipid complexes. Breadfruit starch paste exhibited shear-thinning fluid characteristics, and good thermal and pH stability. The setback viscosity of the breadfruit starch was lower than that of potato and corn starches. The rheological properties of the breadfruit starch paste was well described by the Herschel-Bulkley model at a shear rate of 0 to 100 s(-1), where R-2 is greater than 0.95, and it behaved like a yield-pseudoplastic fluid. Both the storage modulus and loss modulus of the paste initially increased sharply, then dropped after reaching the gelatinization peak. Breadfruit starch gel showed both flexibility and viscosity. Suspension with 6% starch content exhibited very weak gel rigidity; however, this increased significantly at starch contents above 20%.

Thermal, Pasting and Gel Textural Properties of Commercial Starches from Different Botanical Sources

Pasting, Gelatinization, and Retrogradation Characteristics Related to Structural Properties of Tea Seed Starches

Interrelating Grain Hardness Index of Wheat with Physicochemical and Structural Properties of Starch Extracted Therefrom

Effects of Starches from Different Botanical Sources and Modification Methods on Physicochemical Properties of Starch-Based Edible Films

Physicochemical and Structural Characteristics of Starches from Chinese Hull‐less Barley Cultivars

Fine Structure and Gelatinization and Pasting Properties Relationships among Starches from Pigmented Potatoes

Gelatinization, Pasting and Retrogradation Properties and Molecular Fine Structure of Starches from Seven Cassava Cultivars.

Effects of Starch Addition on KGM Sol's Pasting, Rheological Properties, and Gel Texture

Characterization and Correlation Analysis of Physico-chemical Properties of Starch from Different Potato Cultivars

Thermal and Rheological Properties of Starch-Based Materials

Gelatinization, Rheological and Retrogradation Behaviors of Waxy Rice Starch Affected by Gelatin Emulsion and Regulation Mechanism

Effect of Starch Molecular Structure on Precision and Texture Properties of 3D Printed Products

Effect of Shearing and Annealing on the Pasting Properties of Different Starches

Physicochemical Characterizations of Five Dioscorea Alata L. Starches from China

Understanding the Supramolecular Structures and Pasting Features of Adlay Seed Starches

Physical Properties Of Amaranthus Starch

Thermal properties of different types of starch: A review

Thermal, Rheological, Structural and Adhesive Properties of Wheat Starch Gels with Different Potassium Alum Contents

Recent Advances in Rheological Properties of Starch Paste

Effect of Starch on Properties of Instant Fish Vermicelli

Thermal and rheological properties of breadfruit starch.