Numerical modelling of conjugate heat and mass transfer during hydrofluidisation food freezing in different water solutions

Michal Stebel,Jacek Smolka,Michal Palacz,Trygve M. Eikevik,Ignat Tolstorebrov

DOI: https://doi.org/10.1016/j.ifset.2021.102898

2022-01-01

Abstract:A novel method of hydrofluidisation food freezing is numerically investigated in this paper. This technique is based on freezing small food products in a liquid medium under highly turbulent flow conditions when the heat transfer coefficient is higher than 1 000 W⋅m−2⋅K−1, which depends on the operating and flow conditions. A numerical model was developed to characterise the freezing process in terms of the heat transfer and diffusion of liquid solution components into the food product. The study investigates the freezing process of spherical samples in binary solutions of ethanol (30%) and glycerol (40%) and ternary solution of ethanol and glucose (15%/25%). The developed model was employed to determine the concentration of the liquid solution in food samples and to quantify the effect of sample size, heat transfer coefficient, solution temperature and concentration on the process. The food sample size varied from 5 to 30 mm, and the heat transfer coefficients varied from 1 000 to 4 000 W⋅ m−2⋅ K−1. The results confirm that a freezing time of 15 min for 30 mm diameter samples or less than 1 min for 5 mm diameter samples can be achieved with the hydrofluidisation method. The solution uptake was influenced by the solution type, sample size and process parameters and varied from 8.9 to 35 g of solute per kg of product for ethanol-glucose and glycerol solutions, respectively. This paper quantifies the advantages and possible limitations of hydrofluidisation, which has not yet been entirely studied, especially in terms of the mass absorption of different solutes.

food science & technology