Abstract:Sn-Sb alloys are potential solders for replacement of high-Pb solders because of their high melting temperature in lead-free solders. However, Cu substrate is extremely dissolved by the Sn-Sb binary alloy during the high temperature soldering process, which will cause serious reliability problem of the solder joint. Based on this critical issue, we designed a new high temperature lead-free Sn-10Sn-5Cu ternary solder to prevent the dissolution of Cu substrate. In this study, liquid-state interfacial reaction between the high temperature lead-free solder and the Cu substrate was investigated. The liquid-state interfacial reaction of the solder on the Cu substrate was carried out at the different temperature of 280degC, 320degC,360degC and 400degC, and the reaction time was 1min, 10mins, 30mins and 60mins, respectively. Microstructure of the Sn-Sb-Cu bulk solder and the solder joint was observed by scattered electron microscope (SEM). The identification of phase composition was determined by Energy Dispersive X-ray Detector (EDX) and electron probe microscopy analysis (EPMA). During the four reaction temperatures, the interfacial reaction products included a scallop Cu6Sn5 intermetallic compound (IMC) layer and a flat Cu3Sn layer adjacent to Cu substrate. IMCs thickness with the reaction time was measured by the area of interface IMCs layer divided by the interface length. The IMCs thickness increased with the reaction temperature and reaction time, and the relationship between IMC thickness and reaction time was linear with square root of time, which signified that the IMC growth dynamics was diffusion controlled. The diffusion coefficient was calculated by the IMC growth rate, which increased with the higher temperature, corresponding to be 2.30 times 10-14, 6.84 times 10-14, 1.63 times 10-13, 1.99 times 10-13 m2/s for the temperatures of 280degC, 320degC, 360degC and 400degC, res- - pectively. And then the diffusion activation energy was determined to be 57.8 KJ/mol by fitting the four diffusion coefficients at various temperatures, which indicated that the diffusion mechanism was grain boundary diffusion. Between lower temperature of 280degC and higher temperature of 400degC, huge differences existed on the microstructure of IMC in the interior solder of the solder joint.

Effect of Soldering Temperature on Wetting and Optical Density of Dip Coated Sn and Sn-3.5Ag Solders

Effects of High-Temperature Treatment on the Reaction Between Sn-3%Ag-0.5%Cu Solder and Sputtered Ni-V Film on Ferrite Substrate

Wetting Behaviors and Interfacial Reaction Between Sn-10Sb-5Cu High Temperature Lead-free Solder and Cu Substrate

Liquid-state interfacial reaction of Sn-10Sb-5Cu high temperature lead-free solder and Cu substrate

Taguchi Optimization of Wetting, Thermal and Mechanical Properties of Sn-1.0wt.%Ag-0.5wt.%Cu Alloys Modified with Bi and Sb

Effect of Ag nanoparticles on microstructure, damping property and hardness of low melting point eutectic tin–bismuth solder

Determination of Reactive Wetting Properties of Sn, Sn–Cu, Sn–Ag, and Sn–Pb Alloys Using a Wetting Balance Technique

Effect of Temperature on Joint Quality in Wave Soldering of Sn-9Zn-2.5Bi-1.5In Lead-Free Solder Alloy

Study on properties of low-Ag content Sn-Ag-Zn lead-free solders

Effects of soldering temperatures and composition on the microstructures and shear properties of Sn58Bi-xSAC0307/ENIG solder joints

Effects of Soldering Temperature on IMCs Formation between Sn-0.7Cu Solder and Cu Substrate

Intermetallic and tensile study of the newly developed Sn-2.0Ag-0.7Cu solder with addition of 0.5 wt.% zinc

Wettability of Sn-Bi and Sn-Ag-Cu Lead-Free Solder Pastes on Electroplated Co-P Films

Effect of Ag, Ni and Bi Additions on Solderability of Lead-Free Solders

Effect of Au-deposited ceramic nanoparticles on SAC305/Cu solder joints

Effect of Cu Content on Performance of Sn-Zn-Cu Lead-Free Solder Alloys Designed by Cluster-Plus-Glue-Atom Model

Effect of Composition on Structural, Mechanical, and Wetting Properties of Sn-40Bi-xAg Lead-Free Solder Alloys for Green Electronics

The influences of Ag nanoparticles on voids growth and solderability about Sn3.0Ag0.5Cu/Cu solder joint

Microstructure, Wetting Property of Sn–Ag–Cu–Bi– X Ce Solder and IMC Growth at Solder/cu Interface During Thermal Cycling

The effects of solder joint height on the solid–liquid interface diffusion in micro solder joints

Low Melting Temperature Sn-Bi Solder: Effect of Alloying and Nanoparticle Addition on the Microstructural, Thermal, Interfacial Bonding, and Mechanical Characteristics