Abstract:Over the last 10 years, there have been significant developments in new devices for energy recovery, new membrane materials and new sizes and orientations of reverse osmosis (RO) plants, all designed to reduce costs and improve efficiency. The fundamental issue of keeping membrane surfaces clean to ensure efficient RO plant operation has seen relatively few recent developments. This is surprising as any fouling of the membrane surface will have a dramatic effect on energy consumption and plant efficiency. Many researchers have focused on identifying and studying the foulants in great detail, but there have been few studies in how to remove it. Commodity acid and alkali compounds are still widely used due to the perceived lower application costs. Specially blended cleaning chemicals incorporating detergents, surfactants and chelants are also in wide use and are increasingly accepted by the market to be economically and environmentally viable. “Strategically pairing chemical agents that have complementary cleaning mechanisms so a higher cleaning efficiency can be attained” has been described by Wui. The authors have established a research project to explore in detail the use of novel physical and chemical cleaning methods. These included effervescent chemicals, physically generated bubbles and high ionic strength cleaners designed to agitate the cake layer on the membrane surface, assisting deposit removal. A series of experiments using flat sheet test rigs and pilot plant have been completed and the results presented in papers at IDA Tianjin 2013. This paper explains how the multiple cleaning mechanisms remove foulants and presents new data from a food processing plant which recycles wastewater through an RO plant is presented. Historically, cleans were conducted every one to two weeks due to the very high fouling rate. An air inductor and specially formulated cleaning compound cleaners A & B incorporating effervescent and high ionic strength demonstrated that the plant could be cleaned more efficiently and in a shorter timescale than using conventional cleaners. The presence of microbubbles has a dramatic effect on cleaning efficiency as a result of agitation of deposits on the membrane surface. The differential pressure of the first-stage plant was reduced for 4.5 bar to consistently less than 1 bar. The quantity of permeate produced increased from 15 to 24 m3/h. The underlying fouling rate was dramatically reduced so cleans are now conducted on a 6–8 week cycle rather than a 10-day cycle. These improvements occurred because cleaning using microbubbles has been more effective and the membrane surface much cleaner than previously. A clean membrane surface does not foul as quickly as a dirty membrane surface due to surface roughness. The potential for enhanced membrane cleaning by combining different chemical and physical mechanisms is an exciting area of research.

Static cleaning tests as the first step to optimize RO membranes cleaning procedure

Chemical Cleaning Techniques for Fouled RO Membranes: Enhancing Fouling Removal and Assessing Microbial Composition

Alleviation of RO membrane fouling in wastewater reclamation plants using an enhanced acid-base chemical cleaning method

Membrane Fouling and Chemical Cleaning in Three Full-Scale Reverse Osmosis Plants Producing Demineralized Water

Fouling and Chemical Cleaning Strategies for Submerged Ultrafiltration Membrane: Synchronized Bench-Scale, Full-Scale, and Engineering Tests

Osmotic cleaning of typical inorganic and organic foulants on reverse osmosis membrane for textile printing and dyeing wastewater treatment

Mitigating electrodialysis membrane fouling in seawater desalination

Effects of Chemical Cleaning on RO Membrane Inorganic, Organic and Microbial Foulant Removal in a Full-Scale Plant for Municipal Wastewater Reclamation

Studies on the fouling behavior and cleaning method of pervaporation desalination membranes for reclamation of reverse osmosis concentrated water

Enzymatic Cleaning Mitigates Polysaccharide-Induced Refouling of RO Membrane: Evidence from Foulant Layer Structure and Microbial Dynamics

Chemical Cleaning of Nanofiltration Membrane Filtrating the Effluent from a Membrane Bioreactor

Reconstruction and Removal Mechanisms of Gel-like Membrane Fouling for Seawater Desalination: Experiments and Molecular Dynamics Simulations

Design of Anti-Fouling Membrane Coatings for Desalination

Microbubble RO membrane cleaning reduces fouling on WWRO plant

Application of heat-activated peroxydisulfate process for the chemical cleaning of fouled ultrafiltration membranes

Hybrid electrochemical/membrane couplings processes for enhancing seawater pretreatment and desalination

Effective and low-toxicity: A membrane cleaning method using peroxymonosulfate catalytic chlorination

Fouling of a spiral-wound reverse osmosis membrane processing swine wastewater: effect of cleaning procedure on fouling resistance

Study on Potassium Permanganate Chemical Treatment of Discarded Reverse Osmosis Membranes Aiming their Reuse

Intentional Fouling Enabled In Situ Healing of Compromised Reverse Osmosis Membranes for Desalination and Water Purification

Polyelectrolyte-Based Sacri fi cial Protective Layer for Fouling Control in Reverse Osmosis Desalination