Abstract:Since MXene (a two-dimensional material) was discovered in 2011, it has been favored in all aspects due to its rich surface functional groups, large specific surface area, high conductivity, large porosity, rich organic bonds, and high hydrophilicity. In this paper, the preparation of MXene is introduced first. HF etching was the first etching method for MXene; however, HF is corrosive, resulting in the development of the in situ HF method (fluoride + HCl). Due to the harmful effects of fluorine terminal on the performance of MXene, a fluorine-free preparation method was developed. The increase in interlayer spacing brought about by adding an intercalator can affect MXene’s performance. The usual preparation methods render MXene inevitably agglomerate and the resulting yields are insufficient. Many new preparation methods were researched in order to solve the problems of agglomeration and yield. Secondly, the application of MXene-based materials in gas sensors was discussed. MXene is often regarded as a flexible gas sensor, and the detection of ppb-level acetone at room temperature was observed for the first time. After the formation of composite materials, the increasing interlayer spacing and the specific surface area increased the number of active sites of gas adsorption and the gas sensitivity performance improved. Moreover, this paper discusses the gas-sensing mechanism of MXene. The gas-sensing mechanism of metallic MXene is affected by the expansion of the lamellae and will be doped with H2O and oxygen during the etching process in order to become a p-type semiconductor. A p-n heterojunction and a Schottky barrier forms due to combinations with other semiconductors; thus, the gas sensitivities of composite materials are regulated and controlled by them. Although there are only several reports on the application of MXene materials to gas sensors, MXene and its composite materials are expected to become materials that can effectively detect gases at room temperature, especially for the detection of NH3 and VOC gas. Finally, the challenges and opportunities of MXene as a gas sensor are discussed.

DFT study of NH3 adsorption on 2D monolayer MXenes (M2C, M = Cr, Fe) via oxygen functionalization: Suitable materials for gas sensors

Zr3C2O2 MXene as promising candidate for NH3 sensor with high sensitivity and selectivity at room temperature

Adsorption of Gas Molecules on Graphene Nanoribbons and Its Implication for Nanoscale Molecule Sensor

Transition metals doped Zr2CF2 as promising sensor and adsorbent for NH3

Cu‐Doped MoSi2N4 Monolayer As a Potential NH3 Sensor

Electric Field-Modulated High Sensitivity and Selectivity for NH3 on Α-C2n2 Nanosheet: Insights from DFT Calculations

Adsorption of gas molecules on transition metal embedded graphene: a search for high-performance graphene-based catalysts and gas sensors.

Fe2O3 Nanoplate/tio2 Nanoparticles Supported by 2D Ti3C2Tx MXene Conductive Layers for Sensitive Detection of NH3 at Room Temperature

Fe 2 O 3 Nanoplate/tio 2 Nanoparticles Supported by 2D Ti 3 C 2 T X MXene Conductive Layers for Sensitive Detection of NH 3 at Room Temperature

Highly Sensitive Ammonia Gas Sensors at Room Temperature Based on the Catalytic Mechanism of N, C Coordinated Ni Single-Atom Active Center

Ti3C2Tx MXene-SnO2 nanocomposite for superior room temperature ammonia gas sensor

Preparation and Application of 2D MXene-Based Gas Sensors: A Review

Au/α-Fe 2 O 3 /Ti 3 C 2 T x MXene Nanosheet Heterojunctions for High-Performance NH 3 Gas Detection at Room Temperature

Facile Fabrication of Oxygen‐Enriched MXene‐Based Sensor and Their Ammonia Gas‐Sensing Enhancement

Synergistic combination of 2-D MXene and MoO3 nanoparticles for improved gas sensing at room temperature

Sensitivity-Enhanced, Room-Temperature Detection of NH3 with Alkalized Ti3C2Tx MXene

First-Principles Study of Ti-Deficient Ti 3 C 2 MXene Nanosheets as NH 3 Gas Sensors

MXene Ti 3 C 2 T x -Derived Nitrogen-Functionalized Heterophase TiO 2 Homojunctions for Room-Temperature Trace Ammonia Gas Sensing

A DFT study of toxic gases (NH3, C2H2, NO) adsorption and detection on metal oxides (CuO, Ag2O, In2O3) modified MoTe2 monolayer

Ca2C MXene Monolayer As a Superior Material for Detection of Toxic Pnictogen Hydrides

NH3 adsorption on PtM (Fe, Co, Ni) surfaces: cooperating effects of charge transfer, magnetic ordering and lattice strain