Statistical Characterization of Voltage-Biased Squids with Weakly Damped Junctions
Chao Liu,Yi Zhang,Michael Mueck,Shulin Zhang,Hans-Joachim Krause,Alex I. Braginski,Guofeng Zhang,Yongliang Wang,Xiangyan Kong,Xiaoming Xie,Andreas Offenhaeusser,Mianheng Jiang
DOI: https://doi.org/10.1088/0953-2048/26/6/065002
2013-01-01
Abstract:Recently, it has been shown that voltage-biased readout of SQUIDs with weakly damped junctions (large Stewart-McCumber parameter beta(c), due to high shunt resistance) is useful for suppression of preamplifier noise. We experimentally studied the characteristics of 53 planar niobium-SQUID magnetometers with junction shunt resistors R-J nominally of 30 Omega fabricated on 5 x 5 mm(2) chips. The field-to-flux transfer coefficient partial derivative B/partial derivative Phi of the magnetometers was 1.5 nT/Phi(0), with a SQUID loop inductance L-s of about 350 pH. The distributions of important SQUID parameters, such as the current swing I-swing, the dynamic resistance R-d, and the flux-to-voltage transfer coefficient partial derivative V/partial derivative Phi, are given. Nearly all the SQUIDs could be stably operated in the voltage bias mode and their partial derivative V/partial derivative Phi reached a large mean value of 380 mu V/Phi(0). In this case, the SQUIDs can be read out directly by a commercial operational amplifier without any additional means to suppress preamplifier noise. The mean flux noise of the SQUIDs was found to be 4.5 mu Phi(0) Hz(-1/2), corresponding to a field resolution of 7 fT Hz(-1/2). To demonstrate the applicability of these SQUIDs in the direct readout scheme, a simple four-channel SQUID gradiometer system was set up to perform magnetocardiography and magnetoencephalography measurements in a magnetically shielded room.