Abstract:A detailed study of turn around point (TAP) long period fiber gratings (LPFGs) with coupling to the asymmetric cladding modes of a standard single-mode fiber (SMF-28e), fabricated by femtosecond (fs) laser direct writing was realized. The entire fabrication process, including the coating with different titanium dioxide (TiO2) film thicknesses of LPFGs and the corrections needed to achieve coated devices operating precisely in the TAP condition with coupling to the asymmetric cladding modes, was addressed. The significant fabrication details are also given, such as inscription periods, shape and localization of the refractive index modifications across the core. The fabrication process described allows the optimization of the LPFGs sensitivity in regards to the surrounding refractive index(SRI). Optimization of the writing parameters to obtain gratings working at the TAP for two different media surrounding the fiber (water and air) was achieved. It was demonstrated that for a grating period of 191.8m, the LP1,12 mode exhibits a TAP at 1442.7 nm in air, and for a period of 192.5m, the same mode exhibits a TAP at 1448.6 nm in water. The LPFGs operating at the TAP in air and water were coated with 10, 20, and 30 nm thin TiO2 film thicknesses and the spectral behavior characterized. The wavelength sensitivity to the surrounding refractive index (SRI) was assessed in the range between 1.3700 to 1.4120, and a maximum sensitivity of 8051.4nmRIU was measured for the 192.5 m LPFG coated with a 30 nm thick TiO2 film.

Sensitivity Enhancement of Turn-Around-Point Long Period Gratings By Tuning Initial Coupling Condition

Review of Turn around Point Long Period Fiber Gratings

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Turn Around Point Long Period Fiber Gratings With Coupling to Asymmetric Cladding Modes Fabricated by a Femtosecond Laser and Coated With Titanium Dioxide

Sensitivity Characterization of Cascaded Long-Period Gratings Operating near the Phase-Matching Turning Point

High Sensitivity Long-Period Grating Tunable Filters in Standard Communication Fibers and Their Pdl Reduction

Fiber-Taper Seeded Long-Period Grating Pair As A Highly Sensitive Refractive-Index Sensor

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Ultrasensitive long-period gratings sensor works near dispersion turning point and mode transition region by optimally designing a photonic crystal fiber

Tunable sensitivity in long period fiber gratings during mode transition with low refractive index intermediate layer

High Sensitive Refractive Index Sensor Based on Dispersion Turning Point Long-Period Fiber Gratings in Tapered Fiber

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

Multiparameter Sensor Based on Cascaded Micro-Tapered Long-Period Fiber Gratings

Refractive Index Sensing Characteristics of Long-Period Fiber Gratings Near Dispersion Turning Points at 2 Μm Waveband

High Sensitivity Chiral Long-Period Grating Sensors Written in the Twisted Fiber

Compact eccentric long period grating with improved sensitivity in low refractive index region

Superlens-Assisted Laser Nanostructuring of Long Period Optical Fiber Gratings (LPGs) for Enhanced Refractive Index Sensing

Improvement on Refractive Index Sensing by Exploiting the Tapered Two-Mode Fibers

Small-period long-period fiber grating with improved refractive index sensitivity and dual-parameter sensing ability

Advances in dispersion turning point enhanced ultrasensitive optical fiber refractive index sensors

A wide-range temperature immune ultra-sensitive refractive index sensor using concatenated LPGs