Abstract:This paper investigates the effects of height-asymmetric street canyon configurations on air temperature and air quality at the pedestrian level using the ANSYS Fluent (R) software. The study concerns the situation with a subtropical city where there is a predominant wind direction (as is the case in, e.g., Hong Kong) and where the direction of that wind is perpendicular to the street canyon, since this is the worst-case from air pollution and overheating point of view. In particular, this North-South oriented street has been studied with the realistic solar irradiance at two different sun directions, corresponding to morning (08:00) and afternoon (16:00) hours, respectively. Two step-up and two step-down North-South oriented street canyons are considered under two different incoming wind speeds (high and low). The corresponding ratios of upwind and downwind building heights are = 1/3, 2/3 and 3/1, 3/2, respectively. The results demonstrated that for the step-up canyon, a higher upwind building was found to produce a hotter air temperature only at a low wind speed and polluted more severely at both high and low wind speeds, compared with its lower upwind building counterpart. In contrast, for the step-down canyon, a higher downwind building was found to produce cooler air temperatures at both high and low wind speeds and accumulated more pollutants only at a low wind speed, compared with its lower downwind building counterpart. On the other hand, at the high wind speed, both air quality and thermal environment were better in the step-up canyon than in the step-down canyon. However, at the low wind speed, the air quality was higher in the step-down canyon than the step-up canyon, while the step-up canyon still provided better thermal environment than the step-down canyon. Moreover, a Richardson number (Ri) for the asymmetric street canyons is defined for the evaluation of the buoyancy force versus the inertial force. When vertical bar Ri vertical bar > 20, the flow field was mainly dominated by natural convection, and an increase of vertical bar Ri vertical bar resulted in an increase in the air temperature and a decrease in the pollutant concentration. In contrast, when vertical bar Ri vertical bar < 20, the flow field was dominated by forced convection, and the variation of vertical bar Ri vertical bar had an insignificant influence on air quality and air temperature. The simulated pollutant concentration and thermal environment results were further processed to obtain optimization guidelines for a north-south asymmetric canyon in the city centers of Hong Kong via the application of multivariate regression analysis with a group of dimensionless parameters. These guidelines will facilitate the renewal of north-south asymmetric street canyons while enhancing air quality and lowering air temperature by serving as a reference for architects.

Temperature Inversion Breakup with Impacts on Air Quality in Urban Valleys Influenced by Topographic Shading

Effects of Urbanization on the Temperature Inversion Breakup in a Mountain Valley with Implications for Air Quality

Diode effects on street canyon ventilation in valley city: Temperature inversion and calm geostrophic wind

The Impact of the Temperature Inversion Breakup on the Exchange of Heat and Mass in an Idealized Valley: Sensitivity to the Radiative Forcing

Valley city ventilation under the calm and stable weather conditions: A review

Thermal Effect on Pollutant Dispersion in an Urban Street Canyon

Urban boundary‐layer flows in complex terrain: Dynamic interactions during a hot and dry summer season in Phoenix, Arizona

The Multiple-Scale Nature of Urban Heat Island and Its Footprint on Air Quality in Real Urban Environment

Differential effects of valley city morphology on mesoscale flow field characteristics

Divergent Impact of Urban 2D/3D Morphology on Thermal Environment along Urban Gradients

The effects of thermal stratification on airborne transport within the urban roughness sublayer

Three-dimensional modeling of air flow and pollutant dispersion in an urban street canyon with thermal effects

Effects of building aspect ratio, diurnal heating scenario, and wind speed on reactive pollutant dispersion in urban street canyons

Exploring thermal buoyant flow in urban street canyons: Influence of approaching turbulent boundary layer

Effects of Height-Asymmetric Street Canyon Configurations on Outdoor Air Temperature and Air Quality

On thermally forced flows in urban street canyons

Numerical simulation of airflow and dispersion in 3D street canyons: The effect of atmospheric temperature stratifications

Thermal effects on vehicle emission dispersion in an urban street canyon

Impact of Upstream Urbanization on the Urban Heat Island Effects along the Washington–Baltimore Corridor

The Impact of Temperature Inversions on Black Carbon and Particle Mass Concentrations from Wood-burning in a Mountainous Area

Weak Geostrophic Wind Driven Ventilation in Street Canyons with Trees and Green Walls: Cooperating or Opposing Dispersions of Airborne Pollutants?