Abstract:Nanocellulose-based porous materials have been recently considered as ideal candidates in various applications. However, challenges on performances remain owing to the disorderly structure and the limited transport specificity. Herein, wood-inspired composite sponges consisting of cellulose nanofibrils (CNFs) and high-aspect-ratio silver nanowires (AgNWs) were generated with anisotropic properties by the directional freeze-drying. The obtained composite sponges exhibited attractive features, such as an excellent compressive stress of 24.5 kPa, low percolation threshold of 0.1 vol % AgNWs, and high electrical conductivity of 1.52 S/cm. Furthermore, the self-assembled ordered structure in the longitudinal direction and synergistic effect between CNFs and AgNWs benefited the sponge interesting anisotropic electrical conductivity, thermal diffusivity, ultrafast electrically induced heating (<5 s), sensitive pressure sensing (errors <0.26%), and electromagnetic interference (EMI) shielding for special practical demands. This multifunctional material inspired by natural woods is expected to broaden new applications as electronic devices for an intelligent switch or EMI shielding.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10645?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10645</a>.Characterizations of raw materials (Figure S1); the stability of the precursor dispersions (Figure S2); SEM images of conductive CA-d sponges with 0.4 and 0.5 vol % AgNWs (Figure S3); SEM images of conductive CA-n sponges with different volume fractions of AgNWs (Figure S4); the pore distributions and XRD patterns of conductive sponges (Figure S5); resistance values of CA-d-longitudinal sponges with different volume fractions of AgNWs (Figure S6); the dependence of the conductivity (σ) on the volume fraction of AgNWs (Figure S7); resistance values of CA-d-transverse sponges with different volume fractions of AgNWs (Figure S8); resistance values of CA-n sponges with different volume fractions of AgNWs (Figure S9); density and porosity of CA-d (Table S1); the summary of density and EMI parameters for typical porous materials (Table S2); comparison between true and experimental values (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_001.pdf">PDF</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 without an iron cover, and with an iron cover, respectively (Video S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_002.avi">AVI</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 with an iron cover having an unobstructed hole, and with an iron cover having a hole covered with an iron sheet, respectively (Video S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_003.avi">AVI</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 with an iron cover having a hole covered with the longitudinal plane of the sponge, and with an iron cover having a hole covered with the transverse plane of the sponge, respectively (Video S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_004.avi">AVI</a>)This article has not yet been cited by other publications.

Hive‐Inspired Multifunctional Wood‐Nanotechnology‐Derived Membranes with a Double‐Layer Conductive Network Structure for Flexible Electronics

In-situ growth of electrically conductive MOFs in wood cellulose scaffold for flexible, robust and hydrophobic membranes with improved electrochemical performance

Superflexible Wood

Flexible, Strong, Anisotropic Wood‐Derived Conductive Circuit

Porous Flexible Wood Scaffolds Designed for High-Performance Electrochemical Energy Storage

Multi‐Scale MXene/Silver Nanowire Composite Foams with Double Conductive Networks for Multifunctional Integration

Strong, hydrophobic, and transparent wood film decorated with MXene/silver nanowire for electromagnetic interference shielding and electrothermal conversion

Wood-Inspired Anisotropic Cellulose Nanofibril Composite Sponges for Multifunctional Applications

Rationally Designed Conductive Wood with Mechanoresponsive Electrical Resistance

Mesoporous, Three-Dimensional Wood Membrane Decorated with Nanoparticles for Highly Efficient Water Treatment.

Wood Fiber-Based Triboelectric Material with High Filtration Efficiency and Antibacterial Properties and Its Respiratory Monitoring in Mask

Roll-to-roll layer-by-layer assembly bark-shaped carbon nanotube/Ti3C2Tx MXene textiles for wearable electronics

Flexible and Conductive Cellulose Composite Paper for Highly Efficient Electromagnetic Interference Shielding

High-performance and tailored honeycombed Ag nanowire networks fabricated by a novel electrospray assisted etching process

Antimicrobial MXene-based conductive alginate hydrogels as flexible electronics

Flexible Electronics: Flexible, Strong, Anisotropic Wood‐Derived Conductive Circuit (Adv. Sustainable Syst. 6/2021)

Multifunctional Wearable Conductive Nanofiber Membrane with Antibacterial and Breathable Ability for Superior Sensing, Electromagnetic Interference Shielding, and Thermal Management

Flexible electrically conductive films and impregnated papers with chitosan/esterified cellulose multi-network structure with humidity and pressure sensing

Polymer-Assisted Metal Deposited Wood-Based Composites with Antibacterial and Conductive Properties

Flexible and Ultrathin Waterproof Cellular Membranes Based on High‐Conjunction Metal‐Wrapped Polymer Nanofibers for Electromagnetic Interference Shielding

Durable, flexible, and super‐hydrophobic wood membrane with nanopore by molecular cross‐linking for efficient separation of stabilized water/oil emulsions