Abstract:In the United States, the Nuclear Waste Policy Act of 1982 mandated centralised storage of spent nuclear fuel by 1988. However, the Yucca Mountain project is currently scheduled to start accepting spent nuclear fuel in 2010. Since many nuclear power plants were only designed for -10 y of spent fuel pool storage, > 35 plants have been forced into alternate means of spent fuel storage. In order to continue operation and make room in spent fuel pools, nuclear generators are turning towards independent spent fuel storage installations (ISFSIs). Typical vertical concrete ISFSIs are -6.1 m high and 3.3 m in diameter. The inherently large system, and the presence of thick concrete shields result in difficulties for both Monte Carlo (MC) and discrete ordinates (SN) calculations. MC calculations require significant variance reduction and multiple runs to obtain a detailed dose distribution. SN models need a large number of spatial meshes to accurately model the geometry and high quadrature orders to reduce ray effects, therefore, requiring significant amounts of computer memory and time. The use of various differencing schemes is needed to account for radial heterogeneity in material cross sections and densities. Two P3, S12, discrete ordinate, PENTRAN (parallel environment neutral-particle TRANsport) models were analysed and different MC models compared. A multigroup MCNP model was developed for direct comparison to the SN models. The biased A3MCNP (automated adjoint accelerated MCNP) and unbiased (MCNP) continuous energy MC models were developed to assess the adequacy of the CASK multigroup (22 neutron, 18 gamma) cross sections. The PENTRAN SN results are in close agreement (5%) with the multigroup MC results; however, they differ by -20-30% from the continuous-energy MC predictions. This large difference can be attributed to the expected difference between multigroup and continuous energy cross sections, and the fact that the CASK library is based on the old ENDF/B-II library. Both MC and SN calculations were run in parallel on a BEOWULF PC-cluster (eight processors). Timing results indicate that the SN calculation yielded a detailed dose distribution at over 318,426 points in -164 h. Unbiased continuous energy MC required 214 h to calculate dose rates with a 1% relative error in only 18 regions on the surface of the cask. The biased A3MCNP calculations yields dose rates with -0.8% relative error in only 2.5 h on one processor. This study demonstrates that a parallel code, such as the 3-D parallel SN transport code, PENTRAN can solve a complex large problem, such as the storage cask, accurately and efficiently. Moreover, this calculation was performed on a relatively inexpensive PC-cluster. Possible inadequacies of the CASK cross section library still need to be evaluated.

Uncertainty and sensitivity analysis of radionuclide migration through the engineered barriers of deep geological repository: Case of RBMK-1500 SNF

Uncertainty quantification of radionuclide migration in fractured granite

Note on the potential to increase the accuracy of source term calculations for spent nuclear fuel

Sensitivity of the neutron multiplication factor to water ingress into a spent fuel cask

Numerical Assessments of Flow and Advective Transport Uncertainty for Performance Measures of Radioactive Waste Geological Disposal in Fractured Rocks

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Environmental risk evaluation for radionuclide transport through natural barriers of nuclear waste disposal with multi-scale streamline approaches

Modelling of radiation field around spent fuel container

Nuclear data evaluation for decay heat analysis of spent nuclear fuel over 1–100 k year timescale

Monte Carlo Simulations of Spent Nuclear Fuel Dry Storage Cask Measurements with a New External Remote Monitoring System for Developing Safeguards Approaches

Neutron analysis of spent fuel storage installation using parallel computing and advance discrete ordinates and Monte Carlo techniques

Use of groundwater lifetime expectancy for the performance assessment of a deep geologic waste repository: 1. Theory, illustrations, and implications

Parameter Sensitivity Analysis for Long-Term Nuclide Migration in Granite Barriers Considering a 3D Discrete Fracture–Matrix System

Radium sorption on crystalline rock; spatial distribution and sorption modeling study

Application of uncertainty and sensitivity analysis in dose assessment during a postulated LBLOCA for VVER-1000 nuclear reactor

Neutron Measurements and Monte Carlo Simulations of Spent Nuclear Fuel in Dry Cask Storage Using a New Remote Monitoring System Prototype

Radionuclide Migration From an Underground Radioactive Waste Repository Under the Influence of Tectonic Fault Emergence: the Nizhnekanskiy Massif (Siberia, Russia) Example

Achievability of radiological equivalence associated with closed nuclear fuel cycle with fast reactors: impact of uncertainty factors in scenarios of Russian nuclear power development through to 2100. Part 2. Migration of radionuclides

Impact assessment of ionizing radiation on human and non-human biota from the vicinity of a near-surface radioactive waste repository

Numerical simulation of a temporary repository of radioactive material

Verifying Spent Fuel Containers Before Deep Geological Storage with Cosmic Ray Muons