Abstract:A detailed study of turn around point (TAP) long period fiber gratings (LPFGs) with coupling to the asymmetric cladding modes of a standard single-mode fiber (SMF-28e), fabricated by femtosecond (fs) laser direct writing was realized. The entire fabrication process, including the coating with different titanium dioxide (TiO2) film thicknesses of LPFGs and the corrections needed to achieve coated devices operating precisely in the TAP condition with coupling to the asymmetric cladding modes, was addressed. The significant fabrication details are also given, such as inscription periods, shape and localization of the refractive index modifications across the core. The fabrication process described allows the optimization of the LPFGs sensitivity in regards to the surrounding refractive index(SRI). Optimization of the writing parameters to obtain gratings working at the TAP for two different media surrounding the fiber (water and air) was achieved. It was demonstrated that for a grating period of 191.8m, the LP1,12 mode exhibits a TAP at 1442.7 nm in air, and for a period of 192.5m, the same mode exhibits a TAP at 1448.6 nm in water. The LPFGs operating at the TAP in air and water were coated with 10, 20, and 30 nm thin TiO2 film thicknesses and the spectral behavior characterized. The wavelength sensitivity to the surrounding refractive index (SRI) was assessed in the range between 1.3700 to 1.4120, and a maximum sensitivity of 8051.4nmRIU was measured for the 192.5 m LPFG coated with a 30 nm thick TiO2 film.

High Order Resonances in Turning Point Long Period Fiber Grating Fabricated by a Femtosecond Laser

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

CO2 laser-written long-period fiber grating with a high diffractive order cladding mode near the turning point

Enhanced Bragg Resonances in Small Period Long Period Fiber Grating Fabricated with Femtosecond Laser Line by Line Technique

Transmission characteristics of long-period fiber gratings via radiation of femtosecond laser

Fabrication and Characterization of Femtosecond Laser Inscribed Long-Period Fiber Grating in Few-Mode Fiber

Compact Long-Period Fiber Gratings With Resonance at Second-Order Diffraction

LASER DIRECT WRITING OF LONG PERIOD FIBER GRATING BY 800 NM FEMTOSECOND LASER PULSES

Femtosecond Laser Inscribed Small-Period Long-Period Fiber Gratings With Dual-Parameter Sensing

Turn Around Point Long Period Fiber Gratings With Coupling to Asymmetric Cladding Modes Fabricated by a Femtosecond Laser and Coated With Titanium Dioxide

Spectral Characteristics of Square-Wave-Modulated Type II Long-Period Fiber Gratings Inscribed by a Femtosecond Laser

Femtosecond Laser Inscribed Long-Period Gratings in All-Solid Photonic Bandgap Fibers

In-Fiber Grating Fabricated by Femtosecond Laser Direct Writing for Strain Sensing

Torsion sensing characteristics of long period fiber gratings fabricated by femtosecond laser in optical fiber

Deeply-Tapered Ultrashort Long-Period Fiber Grating and Its Application to Ultrasensitive Transverse-Load Sensor

Femtosecond laser fabrication of long period fiber gratings and applications in refractive index sensing

Femtosecond laser fabrication of long period fiber gratings by a transversal-scanning inscription method and the research of its orientational bending characteristics

Characteristic control of long period fiber grating (LPFG) fabricated by infrared femtosecond laser

Fabrication and Sensing Characterization of Thermally Induced Long Period Fiber Gratings in Few Mode Fibers