Abstract:The design and development of electromagnetic and magnetoelectric materials with enhanced properties and performance are desirable for numerous technologies, which are based on integrated electromagnetic materials and components. Nevertheless, engineering the crystalline materials with multi-complex chemistry and multiple cations is challenging. In this context, herein, we report on the effect of rare-earth (RE) cations, namely, Dy3+ and Tb3+, co-substituted into the Co-Ni-mixed ferrite materials for applications in stress/torque sensors. The RE-cations that co-substituted Co-Ni-ferrite materials with a composition of Ni0.8Co0.2Fe2-x(Dy1-yTby)xO4 (x = 0-0.1, y = 0.3; NCFDT) were prepared by the high-temperature solid-state chemical reaction method. The effect of variable composition (x) on the structure, morphology, chemical bonding, and magnetic properties of NCFDT materials is investigated in detail, and the structure-property optimization enabled realizing magnetostrictive NCFDT for sensor applications. X-ray diffraction analysis coupled with Rietveld refinement confirms the face-centered cubic crystal structure. Chemical bonding analysis made using Raman spectroscopic and Fourier transform infrared spectroscopic measurements validates the active modes corresponding to the spinel ferrite structure. The effect of Dy3+ and Tb3+ substitution is primarily seen in the grain size (range of 5-15 μm), as evident from the scanning electron microscopy patterns. Energy-dispersive spectroscopy confirms the presence of all constituent elements with expected composition and without any impurities. The magnetic property measurements indicate that the remnant magnetization (Mr) increases from 0.06 to 0.17 μB/f.u. with the rare-earth (Dy and Tb) substitution and has achieved the maximum squareness ratio (Mr/Ms) = 0.097 at x = 0.10. To validate their application potential in magneto-mechanical sensors, we have measured the magnetostriction coefficients (λ11 and λ12), which demonstrate high values of λ11 = -92 ppm (along the parallel direction) and λ12 = 66 ppm (along the perpendicular direction) for NCFDT with x = 0.05 at H = 7000 Oe. In addition, the maximum value of strain sensitivity is observed, particularly dλ11dH = -0.764 nm/A whereas dλ12dH = 0.361 nm/A. The correlation between strain sensitivity (dλ/dH) and susceptibility (dM/dH), as derived from magnetostriction and magnetization measurements, respectively, is established. The outcomes of this study indicate that Ni-Co-ferrites with Dy3+ and Tb3+ substitution are suitable for stress/torque sensors. These NCFDT ferrites may also be useful as a necessary constitutive phase for the manufacture of magnetoelectric composite materials, making them appropriate for magnetic field sensors and energy harvesting applications.

Suitability of cation substituted cobalt ferrite materials for magnetoelastic sensor applications

Effect of Dy3+ and Tb3+ Rare-Earth Cation Co-Substitution on the Structure, Magnetic, and Magnetostrictive Properties of Ni-Co-Ferrites

Dependence of the magnetostrictive properties of cobalt ferrite on the initial powder particle size distribution

Incorporation of Mn2+ into cobalt ferrite via sol–gel method: insights on induced changes in the structural, thermal, dielectric, and magnetic properties

Effect of Divalent Metal Ions Substitution on the Magnetic Properties of Ba3Co2-Me Fe24O41 (me = Zn2+, Ni2+) Hexagonal Ferrites

Synthesis and investigation of structural, elastic, and electrical properties of cobalt and magnesium substituted Ni-Zn spinel ferrite nanoparticles

The field dependence of magnetoelastic damping in magnetostrictive material and its application in the magnetic field sensing

Grain Orientation Distributions of Polycrystalline Co-Ferrite.

Dielectric Properties and Magnetodielectric Effect of Co1−xCrxFe2O4

Co2+ Substituted Spinel MgCuZn Ferrimagnetic Oxide: A Highly Versatile Electromagnetic Material via a Facile Molten Salt Route

Investigation of Magnetic and Dielectric Properties of Cobalt Cubic Spinel Ferrite Nanoparticles Synthesized by CTAB-Assisted Co-precipitation Method

Study of Structural, Magnetic, and Physical Properties in Nano Cobalt Ferrite by Computational Analysis

Giant tunability of magnetoelasticity in Fe$_4$N system: Platform for unveiling correlation between magnetostriction and magnetic damping

Influence of Fe Substitution on Multiferrocity and Magneto-Dielectric Properties in CoCr2O4

Magnetoelectric Effect in Amorphous Ferromagnetic FeCoSiB/Langatate Monolithic Heterostructure for Magnetic Field Sensing

Effect of Al substitution on the structural, electric and impedance behavior of cobalt ferrite

Dielectric, impedance, AC conductivity and low-temperature magnetic studies of Ce and Sm co-substituted nanocrystalline cobalt ferrite

Multiferroic properties of electrospun CoFe2O4–(Ba0.95Ca0.05)(Ti0.89Sn0.11)O3 nanocomposites for magnetoelectric and magnetic field sensing applications

Magnetic, Optical, and Antibacterial Properties of Ag+ and Ti4+ Doped Cobalt Ferrite Nanocrystals

Analogous behaviour of Nd3+ rare earth substituted tunned structural, stability, magnetic and ferroelectric properties of CoFe2O4 ferrite nanomaterials for its multifunctional application, synthesized using green approach

Temperature dependence of spin resonance in cobalt substituted NiZnCu ferrites