Impact pressure distribution of an SC-CO2 jet used in rock breakage

Yong Liu,Juan Zhang,Jianping Wei,Chenchen Wang,Jiawei Cui

DOI: https://doi.org/10.1007/s40948-021-00332-8

2021-12-30

Abstract:The impact pressure distribution of an SC-CO2 jet was studied to determine its mechanism of action. The generation and development of an impact jet were numerically simulated using Fluent, and the effects of the nozzle structure and stand-off distance on the impact jet were studied via I-Scan. It was concluded that the impact pressure of the stagnation region was shaped like a pyramid, and this pressure of the wall jet was wave-like. The impact pressure of the stagnation region was higher, compared with that of the wall jet region. Taking the impact pressure at a stand-off distance of 12 mm as an example, when the pressure ratio was 0.85, the maximum impact pressure in the stagnation region was 41.64 MPa, which is 2.1 times the maximum impact pressure in the other region. The pressure ratio and the stand-off distance significantly affect the impact pressure distribution. When the nozzle pressure ratio increases, the pressure in the stagnation zone will also increase. However, when the stand-off distance was long (> 55 mm), the pressure ratio rarely affected the impact pressure distribution, when a certain distance is reached, the pressure ratio does not even have an impact on the impact pressure distribution. Both the impact pressure decreased with an increase in the stand-off distance.Article HighlightsCompared with the impact pressure in the other region, the impact pressure in the stagnation region is larger and decreases with the pressure ratio.The pressure ratio and stand-off distance has a major effect on the impact pressure distribution.The jet expansion is different at different stand-off distances, but a stand-off distance that is too large will lead to the same impact pressure distribution under different pressure ratios.

energy & fuels,geosciences, multidisciplinary,engineering, geological