Abstract:With the depletion of river sand and the rising price of quartz sand, more and more researchers are trying to use manufactured sand to prepare ultra-high performance concrete (UHPC). However, due to the large amount of fine particles and high water demand, few studies are available to directly use the manufactured sand in its original state to prepare UHPC. To overcome the above problems, in this study, two locally available recycled manufactured sands are used as aggregates, and an attempt is made to maximize the use of their original gradation to prepare a cleaner construction production integrating high flowability, excellent mechanical per-formance, high cost-effective and environmentally-friendly property that meets the engineering requirements. The properties of workability, mechanical strengths, volume stability, hydration degree, pore structures, morphology of interfacial transition zone (ITZ), carbon emission and production cost are evaluated and dis-cussed. Results indicate that all the mixtures prepared in this study can be considered to have high flowability except when granite sand is completely used. The mixture containing 75% tuff sand can even reach a compressive strength of 166.2 MPa, which is 10.5% higher than the reference one. A reduction of 28.9% can be observed in the early-age autogenous shrinkage of tuff sand UHPC as compared to the reference specimen. The mercury intrusion porosimetry (MIP) and X-ray computed tomography (X-CT) results demonstrate that the micropore volume, porosity and number of mesopores of UHPC increase to a certain extent when manufactured sand is utilized. The scanning electron microscope (SEM) observation reveals the most compact ITZ between cement paste and waste tuff sand. Additionally, the recycled manufactured sand UHPC can diminish the carbon emission of 19 kg and the cost of 27.4% (granite sand) and 25.5% (tuff sand) per cubic meter, showing excellent environmental and economical benefits.

Ultrafine Portland cement grouting performance with or without additives

Sedimentation-affected Engineering Performances and Microstructures of a Hybrid Portland- Sulfate Aluminate Cement Grout Cast in Long Tubes

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Diffusion properties and cementitious characteristics of ultrafine cement slurry in coral sand

Strength and permeability of boric acid-tempered ultrafine cement grouted sand

Experimental Study on the Mechanical Performance of Grouted Specimen with Composite Ultrafine Cement Grouts

Performance evaluation of ultrafine cement as a grout for reservoir impermeability improvement

Workability and mechanical properties of ultrafine cement based grout for structural rehabilitation: A parametric study on the partial replacement with SCMs

Strength and permeability properties of sodium silicate-glyoxal stabilised silt and fine sand

Experimental study on physical properties of superfine cement grouting material

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Study on the Strength and Micro Characteristics of Grouted Specimens with Different Superfine Cement Contents

An experimental study of the effect of cement and chemical grouting on the improvement of the mechanical and hydraulic properties of alluvial formations

The Effect of Incorporating Ultra-Fine Spherical Particles on Rheology and Engineering Properties of Commercial Ultra-High-Performance Grout

Development of microfine cement grouts by pulverizing ordinary cements

Development and application of novel microfine cement-based grout

Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis

Study on properties of inorganic grouting material modified by ultrafine slag powder

Properties of cement grout modified with ultra-fine slag