Establishing the upper performance limit of destination elevator group control using idealised optimal benchmarks

Lutfi Al-Sharif,Jamal Hamdan,Mohamed Hussein,Zaid Jaber,Mohammad Malak,Anas Riyal,Mohammad AlShawabkeh,Daoud Tuffaha
DOI: https://doi.org/10.1177/0143624414566996
2015-01-13
Building Services Engineering Research and Technology
Abstract:The concept of an idealised optimal benchmark (IOB) is used in many engineering disciplines. An example of an IOB from the area of thermodynamics is the formula for evaluating the maximum possible efficiency of a heat engine. This paper explores the concept of an IOB in the area of elevator traffic analysis. It shows that the classical method of elevator traffic design by calculating the value of the round trip time is an example of an IOB; it also lists the assumptions that lie behind the formulae to illustrate this. It then extends the concept of an IOB to calculating the maximum performance of an elevator system when destination group control is applied under incoming traffic conditions. Formulae are derived for finding the minimum values of the expected number of stops ( S) and the highest reversal floor ( H) under destination group control during incoming traffic conditions. The assumption is that the L elevators in the group are sequenced (or rotated) to the L virtual sectors in the building, in order to equalise the handling capacities of the L sectors in the group. A numerical example is presented to illustrate the calculation of the maximum possible handling capacity and comparing it to the handling capacity that is achieved under conventional incoming traffic group control. Three numerical algorithms are also used to find the practical minimum values of H and S, the results of which are compared to the IOB using the equations derived above. Practical application: The concept and the accompanying formulae presented in this paper allow the elevator traffic designer to assess the improvement in the handling capacity of the elevator traffic system when he/she changes the group controller from a conventional group controller to a destination group controller. This improvement could be as much as 200%.
construction & building technology
What problem does this paper attempt to address?