Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Mechanical, water absorption, and aging properties of polypropylene/flax/glass fiber hybrid composites

Coupled Hydro-Mechanical Aging Of Short Flax Fiber Reinforced Composites

Durable mechanical properties of unidirectional flax fiber/phenolic composites under hydrothermal aging

Effect of hygrothermal aging on mechanical properties of continuous flax fiber composites

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Modelling Of Hydrothermal Aging Of Short Flax Fiber Reinforced Composites

Mechanical Properties Characterization of Glass/Carbon Fiber Hybrid Multilayer Composite under Environmental Aging Condition

Degradation of Mechanical Properties of Flax/PLA Composites in Hygrothermal Aging Conditions

Damage investigation of hybrid flax-glass/epoxy composites subjected to impact fatigue under water ageing

Reversible and irreversible changes in physical and mechanical properties of biocomposites during hydrothermal aging

Effect of hybridization on crystallization behavior, mechanical properties, and toughening mechanisms in rubber-modified polypropylene flax fiber composites

Hydrothermal aging of short glass fiber reinforced polyphenylene sulfide composites and property prediction

Effect of UV‐water weathering on the mechanical properties of flax‐fiber‐reinforced polymer composites

Thermal Stability, Durability, and Service Life Estimation of Woven Flax-Carbon Hybrid Polyamide Biocomposites

Effect of thermal aging on the long‐term dynamic and stress relaxation behavior of glass‐fiber reinforced polypropylene composites

Moisture effect on tensile and low‐velocity impact tests of flax fabric‐reinforced PLA biocomposite

Study on mechanical and thermomechanical properties of flax/glass fiber hybrid‐reinforced epoxy composites

Thermomechanical Behavior of Methylene Diphenyl Diisocyanate-Bonded Flax/Glass Woven Fabric Reinforced Laminated Composites

Hydrothermal Ageing Mechanism of Natural Fiber Reinforced Composite in Hot Water

Influence of Hygrothermal Aging on the Durability and Interfacial Performance of Pultruded Glass Fiber-Reinforced Polymer Composites

Influence of accelerated aging on mechanical properties and aging behavior of glass fiber reinforced pipe