Abstract:The presence of As(V) and Mn(VII) in water beyond the permissible concentration allowed by World Health Organization (WHO) standard affects human beings, animals and the environment adversely. Hence, there is need for an efficient material to remove these potentially toxic elements from wastewater prior to discharge into water bodies. This research focused on the application of response surface method (RSM) assisted optimization of Fe-Ni/Activated carbon (AC) catalyst for the synthesis of MWCNTs. Also, the MWCNTs was carboxylated and the adsorption behaviors of both nano-adsorbents in the removal of As(V) and Mn(VII) from industrial wastewater was investigated through experimental and computational techniques. The prepared Fe-Ni/AC, MWCNTs and MWCNTs-OCH2CO2H were characterized using BET, TGA, FTIR, HRSEM, HRTEM, XRD and XPS. The result showed the BET surface area of Fe-Ni/AC, MWCNTs and MWCNTs-OCH2CO2H were obtained as 1100, 1250 and 1172 m2/g, respectively. Due to the enhanced impact of carboxylation, the adsorption capacity of As(V) and Mn(VII) removal increased from 200 to 192 mg/g for MWCNTs to 250 and 298 mg/g for MWCNTs-OCH2CO2H. The isotherm and kinetic models were best fitted by Langmuir and pseudo-second order kinetics, while the thermodynamic investigation found that the adsorption process was endothermic, spontaneous and chemisorptions controlled. The regeneration potential of MWCNTs and MWCNTs-OCH2CO2H after six repeated applications revealed good stability of adsorption efficiency. The study demonstrated optimization importance of Fe-Ni/AC catalyst design for MWCNTs adsorbents and the potentials of utilizing both MWCNTs and MWCNTs-OCH2CO2H in the removal of selected heavy metals from water and soil.

Comparison between activated carbon and multiwall carbon nanotubes in the removal of cadmium(II) and chromium(VI) from water solutions

Competitive Adsorption of Pb2+, Cu2+ and Cd2+ Ions from Aqueous Solutions by Multiwalled Carbon Nanotubes

Removal of Heavy Metals from Aqueous Solution by Carbon Nanotubes: Adsorption Equilibrium and Kinetics.

Adsorption of Cadmium(ii) from Aqueous Solution by Surface Oxidized Carbon Nanotubes

Carbon nanotube filter for heavy metal ion adsorption

Adsorption characteristic of acidified carbon nanotubes for heavy metal Pb(II) in aqueous solution

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Synthesis and Characterization of Dithiocarbamate Carbon Nanotubes for the Removal of Heavy Metal Ions from Aqueous Solutions

Removal of Pb2+ and Cd2+ from Aqueous Solution Using Thiol-Functionalized Multi-Walled Carbon Nanotubes As Adsorbents

Facilitated Adsorption of Mercury(II) and Chromium(VI) Ions over Functionalized Carbon Nanotubes

Effect of Carbon Nanotubes on Cd(II) Adsorption by Sediments

Cadmium ion sorption from aqueous solutions by high surface area ethylenediaminetetraacetic acid- and diethylene triamine pentaacetic acid-treated carbon nanotubes

Preparation of ACF/CNT Composite and Cr(VI) Adsorption Properties

Effect of different carbon nanotubes on cadmium toxicity to Daphnia magna: The role of catalyst impurities and adsorption capacity.

Investigation of factors affecting adsorption of transition metals on oxidized carbon nanotubes.

Enhanced adsorption of As(V) and Mn(VII) from industrial wastewater using multi-walled carbon nanotubes and carboxylated multi-walled carbon nanotubes

Enhancement of Heavy Metals Adsorption on Activated Carbon Fibers by Chemically Modification

Competitive Adsorption of Pb~(2+),Cu~(2+)and Co~(2+)by Multi-walled Carbon Nanotubes

Influence of surface functional groups and solution pH on removal of organic compounds and a heavy metal by activated carbon

Adsorption of heavy metal ions with carbon nanotubes

Removal of Cu2+ Ions from Aqueous Solutions by Carbon Nanotubes