Abstract:To address the drawbacks of inadequate energy density as well as utilization effectiveness in solar energy utilization, phase change energy storage offers a possible option. However, the low thermal conductivity of traditional phase change materials (PCMs) restricts the extent to which solar energy utilization can be enhanced. In this paper, the impact of the metal foam (MF) on the solid–liquid interface, the flow field, the enhancement heat transfer mechanism during the paraffin wax (PX) melting process and thermal storage characteristics was analyzed. Besides, a three-dimensional mathematical model of MF-PX using the hybrid mesh technique was established and software ANSYS-FLUENT was used for simulation. The results indicated that, the hybrid mesh exhibited a reduction of 52.75 % in mesh count compared to the unstructured mesh, resulting in 45 % reduction in computational time. Moreover, the hybrid mesh also showcased improved mesh quality that the unstructured mesh was mainly distributed in the range of 0.48–0.6, while within the range of 0.84–1.0 for the hybrid mesh. More important, the maximum relative error between experimental and simulation was 8.67 %, indicating that the model can make a reasonable prediction. With the proportions of MF increased from 0.11 % to 0.43 %, both the Rayleigh number (Ra) and its amplification decreased. At 800 s, the Ra decreased from 1.76E+07 to 1.20E+07, while the amplification of the Ra was reduced from 1.88E+07 to 1.30E+07. In addition, the natural convection proportions of CMF decreased from 96.31 % to 80.65 %. These observations indicated that natural convection was the primary heat transfer mechanism, and the conduction was enhanced by the increasing proportion of MF. Finally, in terms of heat storage characteristics, the heat storage capacity and heat storage rate of the composite PCM slightly decreased. The heat storage values decreased from 19.30 kJ to 18.66 kJ. Similarly, the heat storage rates decreased from 19.86 J/s to 18.81 J/s.

Enhanced heat transfer for PCM melting in the frustum-shaped unit with multiple PCMs

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

A New Model of Phase Change Process for Thermal Energy Storage

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Numerical study on heat transfer enhancement of PCM using three combined methods based on heat pipe

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

Thermal performance analysis and enhancement of the multi-tube latent heat storage (MTLHS) unit

Numerical and experimental investigations on melting heat transfer performance of PCM in finned cold thermal energy storage

Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin

Experimental and numerical investigation of the melting process and heat transfer characteristics of multiple phase change materials

Numerical study on the melting performance of PCM by fractal fins in three-tube heat storage system

Analyzing competing effects between heat transfer area and natural convection to enhance heat transfer in latent heat storage

Studies on performance enhancement of heat storage system with multiple phase change materials

Numerical simulation of fin arrangements on the melting process of PCM in a rectangular unit

Numerical study on melting and heat transfer characteristics of vertical cylindrical PCM with a focus on the solid-liquid interface heat transfer rate

Strengthening of melting-solidification process in latent heat storage through sine wave shaped fins

Heat transfer enhancement of phase change materials PCMs using innovative fractal H-shaped fin configurations

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh