Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The primary objective of this research work is to generate a dynamically balanced gait for the 16-DOF biped robot while crossing an obstacle using the concept of the zero moment point (ZMP). Also, the authors discussed both the theoretical justification and its practical feasibility on real biped robot. Initially, the position and orientation of the biped robot were obtained with the help of forward kinematics while crossing the obstacle. Later on, various joint angles of the biped robot were calculated using the inverse kinematics approach. Further, the Lagrange-Euler formulation approach was employed for evaluating the dynamics of the biped robot. To generate the smooth gait of the biped robot, a cubic polynomial equation has been assigned for foot and wrist trajectories in the sagittal plane and hip trajectories in the horizontal plane. This integration allows the robot to cross the obstacles while maintaining dynamic balance, marking a significant advancement while crossing the obstacle with a height and width equal to 50 mm, which is 16.10% of the length of the robot's leg. While crossing the obstacle, the gait of the biped robot has been considered in three stages, such as landing the foot on the obstacle, landing the foot on the ground away from the obstacle by one leg and crossing over the obstacle by another leg. A simulation study has been conducted on MATLAB to verify the dynamically balanced gait while crossing the obstacle. Finally, the generated gait angles are fed into the real 16-DOF biped robot developed by the Robotics Lab at MANIT Bhopal. It has been observed that the generated gait at three stages is more dynamically balanced while crossing the obstacle.

Biped Robot Stepping Over a Ditch using Multi-Objective Optimization Based on Contact Wrench Cone Approach

Contact Wrench Cone-Based Stable Gait Generation and Contact Slip Estimation of a 12-DoF Biped Robot

Nonlinear MPC-Based Control Framework for Quadruped Robots: Touch-Down in Complex Terrain

A Zmp and Com Online Replanning Method for Stable Walking of Bipedal Robots

Coupling Mechanical Design and Control Design for Energy-Efficient and Stable Walking of A Compass-Like Biped

Feedback Control for Compass-Like Biped Robot with Underactuated Ankles Using Transverse Coordinate Transformation

Tip over Avoidance Control for Biped Robot

High efficient walking of compass-like biped robots with foot rotation

Stable Biped Walking Based on Linear Search Optimization Algorithm

Feedback Control of Planar Biped Robot with Regulable Step Length and Walking Speed

Balance and Walking Control for Biped Robot Based on Divergent Component of Motion and Contact Force Optimization

Biped Walking Based on Stiffness Optimization and Hierarchical Quadratic Programming

Contact Impact Inhibition Strategy for Biped Robot Walking Based on Central Pattern Generator.

A Robust Biped Gait Controller Using Step Timing Optimization with Fixed Footprint Constraints

Universal Walking Control Framework of Biped Robot Based on Dynamic Model and Quadratic Programming

Control Strategy Research for a Biped Walking Robot with Flexible Ankle Joints

Balance Control Strategy of Biped Walking Robot SUBO-1 Based on Force-Position Hybrid Control

Real-Time Control of Full Actuated Biped Robot Based on Nonlinear Model Predictive Control

Design of dynamically balanced gait for the biped robot while crossing the obstacle

Control Strategy of Stable Walking for a Hexapod Wheel-Legged Robot.

An MPC-DCM Control Method for a Forward-Bending Biped Robot Based on Force and Moment Control