Fluoride Removal from Aluminium Finishing Wastewater by Hydroxyapatite

Paraschos Melidis
DOI: https://doi.org/10.1007/s40710-014-0056-0
2015-02-18
Environmental Processes
Abstract:The hexavalent chromium toxicity forces the aluminium finishing industry to use fluoride-containing chemicals in order to improve aluminium passivation. Disposal of industrial wastewaters containing excess concentration of fluoride to surface and ground waters can cause several health hazards. Effluents containing fluoride need treatment to reduce their concentration to disposable values before being discharged into public sewage. In this study, fluoride-containing wastewater from the aluminium finishing industry was firstly treated by precipitation at pH 12.5, achieving residual fluoride concentrations of 8.69 ± 1.84 mg/L from an initial concentration of 74.5 ± 4.6 mg/L, and then by adsorption of the remaining solution onto hydroxyapatite (HAP), resulting in fluoride effluent concentrations of 4.09 ± 0.16 mg/L. The total fluoride removal efficiency was 94.5 %. The sorption onto HAP data fitted well the Freundlich (r2 = 0.992) and Langmuir (r2 = 0.994) models. The adsorption capacity indicator (KF) was equal to 0.723. The dimensionless constant RL of 0.62 indicates favorable sorption of fluoride onto HAP. It is concluded that the adsorption step using HAP can be used as a post-treatment to remove fluoride from aluminium finishing industry wastewater.
What problem does this paper attempt to address?