Abstract:Polymeric materials are being increasingly used to replace many metallic components due to their beneficial properties such as higher strength-to-weight ratio and corrosion resistance. However, the widespread use of polymers poses a risk to the environment as they are not biodegradable. The addition of the waste jute fiber and sawdust fiber as reinforcement to the epoxy resin improved its toughness and induced the biodegradability of the polymer. To examine the effect of the jute fiber and sawdust fiber on biodegradability, the composites were then kept in the drainage system for one year, and the impact energy and fracture morphology of the as-cast and weathered samples were examined using a drop ball impact test and a Charpy impact test. During the weathering period, weight gain was initially observed due to the water absorption by the porous fibers, but after three months, the composites started to lose weight due to the degradation of the fiber by swelling and microbial attacks. Microorganisms in the drainage system used the fiber as their energy source, which resulted in the deterioration of the fiber and the production of CO2. The production of CO2 was identified by the FTIR analysis of the weathered composite samples. TGA analysis of the as-cast and weathered samples reveals the reduction of the onset thermal degradation temperature of the weathered composites due to the degradation of the composites. The fiber disintegrated through microbial attack and the fiber swelling caused by the absorption of water by jute fiber and sawdust fiber is identified through SEM imaging. The SEM image also reveals the formation of biofilms and the growth of microorganisms at the fibers. A higher growth rate of the microorganisms was observed in the jute fiber composite than in the sawdust fiber composite, as sawdust contains a high level of lignin that protects it from degradation. The results of this study suggest that both sawdust fiber and jute fiber composites induce biodegradability in the epoxy matrix, but jute fiber was more prominent in this regard. The discovery paves the way for using natural fibers in biodegradable polymer composites, reducing polymeric pollution in the environment.

Evaluation of conductivity and mechanical properties of natural fiber reinforced soy‐melamine formaldehyde based green composite

Toward Sustainable Composites: Graphene‐Modified Jute Fiber Composites with Bio‐Based Epoxy Resin

Investigation of the mechanical properties of jute and glass fiber reinforced epoxy composite for sustainable and cost-effective applications

Synthesis and Performance Evaluation of Unsaturated Polyester Blends of Resins and Its Application on Non-woven/Fabric Jute Fibers Reinforced Composites

Effect of Jute Fiber Modification on Mechanical Properties of Jute Fiber Composite

Biobased natural fiber-reinforced composites derived from lignin-based resin and mercerized jute fibers

Enhancing Sustainability: Jute Fiber-Reinforced Bio-Based Sandwich Composites for Use in Battery Boxes

Fabrication and characterization of woven and comingled nonwoven sheet polypropylene hybrid composite by recycling and alkali-treated jute waste fibers

Effect of wood varnish coating on the water absorption and mechanical properties of jute fiber reinforced epoxy composites

Fabrication and characterization of natural fiber reinforced cowpea resin-based green composites: an approach towards agro-waste valorization

Development of hybrid green composites by dual natural fibers (jute/bamboo) reinforcement and investigation of their mechanical behavior

Experimental investigation of mechanical properties of jute/hemp fibers reinforced hybrid polyester composites

Studies on water uptake behavior and mechanical performance of bio-wastage-reinforced bio composites for improved sustainability

Mechanical and Hygroscopic Characteristics of Unidirectional Jute/Glass and Jute/Carbon Hybrid Laminates

Towards sustainable composites: Evaluation of mechanical properties, erosion behavior and applications of natural fiber-epoxy composites

Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites

Fabrication and characterizations of screw pine root fiber reinforced soy composite as sustainable green composite

Waste natural fibers for polymer toughening and biodegradability of epoxy-based polymer composite through toughness and thermal analysis

Investigation on Fabrication and Properties of Natural Fiber Reinforced Melamine Formaldehyde Matrix Composites

Mechanical and Water Absorption Properties of Jute/Palm Leaf Fiber-Reinforced Recycled Polypropylene Hybrid Composites

Jute fibre reinforced biodegradable composites using starch as a biological macromolecule: Fabrication and performance evaluation