Abstract:In this work, an electrooxidation (EO) of amoxicillin (AMX) wastewater treatment was performed based on a three-stage electrochemical flow-through mode to address the emerging issue of antibiotic contaminants in water matrices. The removal of 96.1 % for AMX was obtained and followed pseudo-first-order reaction kinetics (kobs) with a value of 0.1197 min−1 and electric energy per order (EE/O) of 20.47 kWh/m3 at a current density of 8.49 mA/cm2. Compared with single-stage EFTM, the three-stage EFTM had an outstanding performance with a slight difference for AMX degradation and a significantly reduced EE/O. However, a marked difference was achieved in mineralization efficiency. It obtained TOC removal of 81.3 %, which was improved about 1.52 times that of the single-stage EFTM (53.5 %) when an analogous current was applied (500 mA) and reduced 1.77 times concerning the specific energy consumption (EC) of TOC mass removed (3.337 kWh/g TOC). It was moreover astonished that the EC per unit TOC mass removed decreased by increasing an initial quantity of TOC mass. More interestingly, the electrocatalytic of porous Ti–ENTA/SnO2–Sb benefited the production of OH in a three-stage EFTM at high current, which contributes a vital role in removing organic pollutants. Furthermore, scavenging experiments revealed that SO4− radical plays a dominant role as the main radical species compared to OH radical in indirect electrooxidation of AMX. As such, the results of this study indicate that both hydroxyl and sulfate radicals-mediated oxidation. Furthermore, the feasibility and stability of the porous Ti-ENTA/SnO2-Sb anode were evidenced by the practical application potential of a multi-stage flow-through system through its significant and stable AMX removal efficiency of at least 94.2 % during the long-term EO test of 12 h. Hence, the three-stage flow-through system furnishes the superiority with insight and application into the effective treatment of antibiotic wastewater.

Removal of amoxicillin and cefuroxime axetil by advanced membranes technology, activated carbon and micelle–clay complex

Removal of Amoxicillin From Wastewater Onto Activated Carbon: Optimization of Analytical Parameters by Response Surface Methodology

Removal of Cefotaxime Antibiotic from Industrial Wasterwater via Forming a Complex with Fe(III)

Removal of ciprofloxacin antibiotic pollutants from wastewater using nano-composite adsorptive membranes

Biodegradation and Adsorption of Antibiotics in the Activated Sludge Process.

Removal of four antibiotics from the aqueous phase using Polyethylene adsorbent: Mechanistic understanding and reusability potential

Removal of Antibiotics from Water by Polymer of Intrinsic Microporosity: Isotherms, Kinetics, Thermodynamics, and Adsorption Mechanism

Efficiency of membrane technology, activated charcoal, and a micelle-clay complex for removal of the acidic pharmaceutical mefenamic acid

Removal of amoxicillin from aqueous solution using sludge-based activated carbon modified by walnut shell and nano-titanium dioxide

Removal of Antibiotics from Real Hospital Wastewater by Cold Plasma Technique

Simultaneous Removal of Antibiotics and Antibiotic Resistance Genes from Pharmaceutical Wastewater Using the Combinations of Up-Flow Anaerobic Sludge Bed, Anoxic-Oxic Tank, and Advanced Oxidation Technologies

Removal of Antibiotics from Aqueous Solutions by a Carbon Adsorbent Derived from Protein-Waste-Doped Biomass

Different Removal Behaviours of Multiple Trace Antibiotics in Municipal Wastewater Chlorination.

OPTIMIZATION OF THE REMOVAL OF ANTIBIOTICS FROM PHARMACEUTICAL WASTEWATER ON ACTIVATED CARBON USING RESPONSE SURFACE METHODOLOGY

Removal of Amoxicillin Using a New Adsorbent: Silver Nanoparticle Modified With Poly(ε‐Caprolactone)‐Block‐Poly(L‐Lactide) Copolymer

A sustainable approach for the removal of pharmaceutical contaminants from effluent using polyamide thin-film composite membranes integrated with Zn-based metal organic frameworks

Florfenicol removal from veterinary pharmaceutical effluents: Tri-metallic zeolite 5A° for electrochemical oxidation and catalytic ceramic membrane separation

The removal of amoxicillin from aquatic solutions using the TiO2/UV-C nanophotocatalytic method doped with trivalent iron

Treatment of High-Strength Pharmaceutical Wastewater and Removal of Antibiotics in Anaerobic and Aerobic Biological Treatment Processes

Effective degradation of amoxicillin by multi-stage flow-through electrochemical system using porous electrodes

Self-Assembled Aminated and TEMPO Cellulose Nanofibers (Am/TEMPO-CNF) Aerogel for Adsorptive Removal of Oxytetracycline and Chloramphenicol Antibiotics from Water