Abstract:It is necessary to use adsorbents derived from natural materials, such as biosorbents since they do not any damage to the environment, for pollutants elimination that contaminate the aquatic environment. Since the deficiency in the literature was determined in the study in which only the adsorbent obtained from tomato stem was used before this study, a waste material with tomato stem was selected as a natural adsorbent without chemical compounds. Phosphate and dye contaminants, which are often present in industrial and municipal wastewater, were eliminated by adsorption process. Fourier transform infrared (FTIR), x‐ray fluorescence (XRF), Zeta potential, and scanning electron microscope (SEM) with energy dispersive x‐ray (EDX) spectroscopy were used to analyze tomato stems. The tomato stems resulted in high pollutants removal efficiencies recording 99.31% of phosphate (PO43− ) removal efficiency and 99.44% of Direct Orange 46 (DO 46) dye removal efficiency at optimal conditions. The best conditions for phosphate adsorption were pH = 6.0, 2.0 g/L of tomato stems concentration, 50 mg/L initial phosphate concentration and a contact time of 120 min resulting in an adsorption capacity of 4.24 mg/g. The best conditions for DO 46 adsorption were pH = 12, 2.0 g/L of adsorbent concentration, initial dye of 200 mg/L concentration and a contact time of 120 min (q = 13.76 mg/g). For both adsorption experiments, the adsorbent size was chosen to be less than 500 μm. As a result of the adsorption experiments on tomato stem ash, Freundlich isotherm (R2: 0.94) was suitable for DO 46 dye adsorption and Temkin isotherm (R2: 0.99) was suitable for PO43− elimination. The phosphate (R2: 0.97) and dye (R2: 1) adsorption onto tomato stem ash was explained using a pseudo‐second‐order kinetic model. It has been determined that the adsorption of the DO 46 dye with the tomato stem ash is an exothermic (∆H: −3.174) process that occurs naturally due to its nature (∆G: −8.41). On the other hand, it was determined that the adsorption of PO43− was spontaneous (∆G: −5.21) and endothermic (∆H: 5.7357). According to the adsorption results obtained in this study, it is appropriate to use the tomato stem, which is generated as waste, as an adsorbent. It is thought that obtaining from bio‐based waste in the removal of pollutants such as dye and phosphate in water will both reduce the cost and create an advantage in terms of biodegradability.

Adsorption Kinetics of Edamame Soybean Peel Activated Carbon in Reducing the Level of Phosphate

Preparation of an activated adsorbent from water treatment plant sludge for phosphate removal of from wastewater: optimization, characterization, isotherm, and kinetics studies

The Use of Granular Activated Carbon and Zeolite as an Adsorbent to Reduce the Concentration of Phosphate, Chemical Oxygen Demand and Total Suspended Solid in Laundry Wastewater

Amination of Non-Functional Polyvinyl Chloride Polymer Using Polyethyleneimine for Removal of Phosphorus from Aqueous Solution

Removal of phosphorus from aqueous solution using multi-wall carbon nanotube (MWCNT) as adsorbent: Kinetics and isotherms

Adsorption of Phosphate from Aqueous Solution Using Hydrochar Produced from Agricultural Wastes

Mechanism and Kinetics of Low Concentration Total Phosphorus and Reactive Phosphate Recovery from Aquaculture Wastewater via Calcined Eggshells

Recovery and utilization of phosphorus from fruit and vegetable wastewater

Efficient removal of phosphate by nitrogen and oxygen-rich polyethyleneimine composite

Rapid adsorption of phosphorus at low concentration from water using a novel green organometallic material EGCG-Fe

A Sustainable Banana Peel Activated Carbon for Removing Pharmaceutical Pollutants from Different Waters: Production, Characterization, and Application

Adsorption enhancement of Congo red dye from wastewater based on edamame shell originated activated carbon by the cations: Experimental and theoretical studies

Characterization of Adsorbents Based on Pahae Natural Zeolite and Candlenut Shell Activated Carbon for Peat Water Purification

Removal of Azo and Anthraquinone Dye by Plant Biomass as Adsorbent – A Review

Kinetics, Isotherms and Adsorption–Desorption Behavior of Phosphorus from Aqueous Solution Using Zirconium–Iron and Iron Modified Biosolid Biochars

Thermally modified bamboo-eggshell adsorbent for phosphate recovery and its sustainable application as fertilizer

Adsorption of Direct Orange 46 and phosphate ions on waste tomato stem ash used as a bio‐based adsorbent

Paracetamol and amoxicillin adsorptive removal from aqueous solution using phosphoric acid activated-carbon

Nitrogen-doped activated carbon composite electrode for deionization of phosphate removal and DFT model adsorption of phosphates

Synthesis of co-pyrolyzed biochar using red mud and peanut shell for removing phosphate from pickling wastewater: Performance and mechanism

Adsorption of chromium from electroplating wastewater using activated carbon developed from water hyacinth