Abstract:Additive manufacturing (AM) is recognized as a core technology for producing high-value components. The production of complex and individually modified components, as well as prototypes, gives additive manufacturing a substantial advantage over conventional subtractive machining. For most industries, some of the current barriers to implementing AM include the lack of build repeatability and a deficit of quality assurance standards. The mechanical properties of the components depend critically on the density achieved. Therefore, defect/porosity analysis must be carried out to verify the components’ integrity and viability. In parts produced using AM, the detection of unfused powder using computed tomography is challenging because the detection relies on differences in density. This study presents an optimized methodology for differentiating between unfused powder and voids in additive manufactured components, using computed tomography. Detecting the unfused powder requires detecting the cavities between particles. Previous studies have found that the detection of unfused powder requires a voxel size that is as small as 4 μm 3 . For most applications, scanning using a small voxel size is not reasonable because of the part size, long scan time, and data analysis. In this study, different voxel sizes are used to compare the time required for scanning, and the data analysis showing the impact of voxel size on the detection of micro defects. The powder used was Ti6Al4V, which has a grain size of 45–100 μm, and is typically employed by Arcam electron beam melting (EBM) machines. The artifact consisted of a 6 mm round bar with designed internal features ranging from 50 μm to 1400 μm and containing a mixture of voids and unfused powder. The diameter and depth of the defects were characterized using a focus variation microscope, after which they were scanned using a Nikon XTH225 industrial CT to measure the artifacts and characterize the internal features for defects/pores. To reduce the number of the process variables, the measurement parameters, such as filament current, acceleration voltage, and X-ray filtering material and thickness were kept constant. The VGStudio MAX 3.0 (Volume Graphics, Germany) software package was used for data processing, surface determination, and defects/porosity analysis. The main focus of this study is to explore the optimal methods for enhancing the detection of pores/defects while minimizing the time taken for scanning, data analysis, and determining the effects of noise on the analysis.

Simulation-based optimization of microcomputed tomography inspection parameters for topology-optimized aerospace brackets

Additive manufacturing and non-destructive testing of topology-optimised aluminium components

Topology optimization of aerospace part to enhance the performance by additive manufacturing process

Combination of topology and shape optimization with finite element modeling in the case of an aerospace component produced by laser based additive manufacturing

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

A post-topology optimization process for overhang elimination in additive manufacturing: design workflow and experimental investigation

Quality assurance of additively manufactured alloys for aerospace industry by non-destructive testing and numerical modeling

Design optimization and validation for additive manufacturing: a satellite bracket application

Innovative design and process simulation of aviation bracket based on topology optimization and additive manufacturing

An aerospace bracket designed by thermo-elastic topology optimization and manufactured by additive manufacturing

A highly efficient computational approach for part-scale microstructure predictions in Ti-6Al-4V additive manufacturing

A Data-Driven Approach for Process Optimization of Metallic Additive Manufacturing Under Uncertainty

A comparison of experimental compressive axial loading testing with a numerical simulation of topologically optimized cervical implants made by selective laser melting

FEM Simulation of AlSi10Mg Artifact for Additive Manufacturing Process Calibration with Industrial-Computed Tomography Validation

Additive Manufacturing Redesigning of Metallic Parts for High Precision Machines

Combining Structural Optimization and Process Assurance in Implicit Modelling for Casting Parts

Additive Manufacturing Process Simulation of Laser Powder Bed Fusion and Benchmarks

Enabling rapid X-ray CT characterisation for additive manufacturing using CAD models and deep learning-based reconstruction

Process-Specific Topology Optimization Method Based on Laser-Based Additive Manufacturing of AlSi10Mg Components: Material Characterization and Evaluation

Development of an Additive Manufactured Artifact to Characterize Unfused Powder Using Computed Tomography

Topological optimization of structures with thermomechanical loading under compliance constraints for 3D printing applications