Abstract:The presence of polycyclic aromatic hydrocarbons (PAHs) in wastewater has raised concerns about human health due to their potential carcinogenic and mutagenic properties. The widespread use of products containing acenaphthene (ACN, one of the 16 priority PAHs) in many industries and large-scale ACN release into the wastewater has resulted in dangerous concentrations of ACN in the environment. As a result, before discharge, it is required to eliminate or reduce its concentration to an acceptable level. Adsorption is an effective method of removing PAHs from wastewater. In this study, the ACN adsorption reaction in sample wastewater was evaluated using activated carbon produced by oil palm leaves. HPLC was used as an analytical method for quantifying ACN in wastewater samples. The initial concentration of ACN in water samples was 9.58 ± 0.5 mg/L. The experiments were conducted using the CCD combined with the RSM and using three independent variables, i.e., pH, activated carbon dosage (g/L), and contact time (min), and one dependent variable, i.e., ACN removal efficiency (%). The ANOVA was used to identify the significance of the developed model in the RSM. Lastly, the RSM was used to optimize the adsorption results. The experimental results determined that the removal of 98.73 ± 1% of ACN (the highest amount) was achieved at pH 7, while the removal of 88.44 ± 1% of ACN (the lowest amount) was achieved at pH 4.5. The adsorption efficiency of ACN was slightly increased by an increase in activated carbon dosage from 0.1 to 3 g/L (<4%). The contact time was the most significant factor in controlling the adsorption efficiency of ACN in wastewater, and not pH value or dosage. The adsorption reaction was quick, and 88–90% of ACN was removed within 5 min of the adsorption reaction, followed by slower adsorption for up to 90 min. The RSM model was developed on the basis of experimental results. An ANOVA determined that the developed model was significant enough to represent the adsorption data as the p-value was <0.05 for the model. The factors pH, adsorbent dosage, and contact time were also significant factors (p-value < 0.05). The optimization results showed that pH of 6.96, adsorbent dosage of 2.62 g/L, and contact time of 71.67 min were the optimal conditions for eliminating 98.88% of the ACN. The optimization results were verified in the lab, and a close agreement was found between the predicted results of the RSM and experimental results. The study found that the RSM is an effective tool for optimizing operating variables, as well as for significantly reducing time and experimentation costs.

Polycyclic aromatic hydrocarbons removal from vehicle-wash wastewater using activated char

Removal of Acenaphthene from Water by Triton X-100-facilitated Biochar-Immobilized Pseudomonas Aeruginosa

INTENSIFICATION OF ADSORPTION PROCESS BY USING THE PYROLYTIC CHAR FROM WASTE TIRES TO REMOVE CHROMIUM(VI) FROM WASTEWATER

Application of the Response Surface Methodology (RSM) in the Optimization of Acenaphthene (ACN) Removal from Wastewater by Activated Carbon

Adsorption of hydrocarbon pollutants from wastewater using Cu‐ and Zn‐loaded activated carbon derived from waste tires

Adsorption Characteristics of Polycyclic Aromatic Hydrocarbons by Biomass-Activated Carbon in Flue Gas

Integrated Photocatalytic Oxidation and Adsorption Approach for the Robust Treatment of Refinery Wastewater Using Hybrid TiO2/AC

Experimental Study on the Removal of Pahs Using In-Duct Activated Carbon Injection

Adsorption mechanism of polycyclic aromatic hydrocarbons using wood waste-derived biochar

Comparative Study on Composition, Structure, and Adsorption Behavior of Activated Carbons Derived from Different Synthetic Waste Polymers.

Preparation of high-quality activated carbon from polyethyleneterephthalate (PET) bottle waste. Its use in the removal of pollutants in aqueous solution

An Overview and Evaluation of Highly Porous Adsorbent Materials for Polycyclic Aromatic Hydrocarbons and Phenols Removal from Wastewater

Enhanced PAHs Adsorption Using Iron-Modified Coal-Based Activated Carbon Via Microwave Radiation

Kinetic and Isothermal Investigation on the Excellent Adsorption Removal of Dibenzothiophene from Model Fuel over MnO/Activated Carbon Composite

Novel Perfluorooctanesulfonate-Imprinted Polymer Immobilized on Spent Coffee Grounds Biochar for Selective Removal of Perfluoroalkyl Acids in Synthetic Wastewater

Microwave-Assisted Modification of Activated Carbon with Ammonia for Efficient Pyrene Adsorption

An innovative "Up-and-Down" adsorption processes for pyrene removal from acid wastewater as new approach in water remediation

Application of sodium dodecyl sulfate and cetyltrimethylammonium bromide-modified activated carbon for removal of PAHs from peanut oil

Utilizing Hydrothermally Carbonized Food Waste-Derived Activated Hydrochar for the Elimination of Carbamazepine and Naproxen

Phosphoric Acid Activated Carbon from Melia azedarach Waste Sawdust for Adsorptive Removal of Reactive Orange 16: Equilibrium Modelling and Thermodynamic Analysis

Preparation of Biochar from Enteromorpha Prolifera and Its Use for the Removal of Polycyclic Aromatic Hydrocarbons (pahs) from Aqueous Solution.