Abstract:Composites synthesized through the deposition of Mn 3 O 4 on graphene, carbon nanotube and other carbon based materials have attracted much attention recently as potential electrode materials for different electrochemical applications such as pseudocapacitor; Lithium-ion battery; and catalysis. The primary reason Mn 3 O 4 is grown on these substrates in spite of having high charge storage capacity as pseudocapacitor or Lithium-ion battery electrodes on its own is to enhance its electrical conductivity and/or to impart flexibility to the electrode, which is difficult for a fully metallic electrode. Higher electrical conductivity prolongs the cycle life of an electrode. In addition, the substrate contributes capacity and thus, enhances the overall energy density of an electrode. Mn 3 O 4 acts as a spacer and keeps graphene nanosheets separated when used as the substrate for capacitor electrode fabrication. This helps retain the high surface area of graphene nanosheets in the electrode which contributes additional capacitance. Mn 3 O 4 supported on graphene and other carbon substrates have recently been investigated as catalyst for methanol electro-oxidation in alkaline media; CO oxidation; and Oxygen reduction reaction (ORR). High surface area substrate uniformly distributes metal particles and prevents their agglomeration and dissolution during catalytic process. In addition, high electrical conductivity of graphene and carbon substrates enhances the electronic conductivity of Mn 3 O 4 which is of importance for superior catalytic activity. Composite of Mn 3 O 4 combined with carbon based substrate has also found non-electrochemical application such as the removal of Pb and Cu ions from aqueous solution because of their adsorptive behaviour. A myriad of procedures have been adopted for the synthesis of Mn 3 O 4 on graphene or other carbonaceous substrates. All of these methods involve one or more of the following factors that complicate the process, such as: long synthesis time; high synthesis temperature; use of hazardous/toxic chemicals; multistep process and the requirement for sophisticated device or highly controlled environment. In fact, the complicacies associated with the synthesis of Mn 3 O 4 have already been acknowledged and investigations have been directed at finding relatively simpler route such as the use of microwave technique. In this research, we report the synthesis of clusters of nearly octahedral shapedn Mn 3 O 4 nanoparticles on few-layer graphene nanoplatalet (GnP) surface through a simple, wet-chemical, polyethyleneimine (PEI) mediated route. Few-layer graphene nanoplatelets are ultrathin particles of graphite prepared through proprietary intercalation and exfoliation method (XG Sciences, Inc., Lansing, MI, USA). The components involved in this synthesis method are manganese salts (KMnO 4 and MnSO 4 .H 2 O); water; PEI; and GnP as the substrate. The synthesis is carried out at a temperature of 80°C only and in open air. Highly crystallized Mn 3 O 4 particles, as observed by X-Ray Diffraction (XRD), can be synthesized on GnP surface. It has also been observed that PEI acts as a reducing agent and as a capping agent on a continuous network of ribbon-like Birnessite-MnO 2 (IV) to produce a nearly octahedral shaped nanoparticles of Mn 3 O 4 (II, III). It has already been mentioned that composites of Mn 3 O 4 on graphene or other carbonaceous substrates find a myriad of applications. Thus, our research findings to synthesize GnP-Mn 3 O 4 composite through a simple method should be of interest to a broad group of researchers. In this research, we have investigated the performance of this composite system as a Lithium-ion battery anode only. Our preliminary investigations reveal that the Mn 3 O 4 composite synthesized through this method has just as much potential as the ones prepared through other alternative methods.

Nanostructured Multilayer Composite Films of Manganese Dioxide/Nickel/Copper Sulfide Deposited on Polyethylene Terephthalate Supporting Substrate

Rapid Synthesis of Mn-Doped NiFe2O4 Nanosheet Arrays for High-Performance Hybrid Supercapacitors

Manganese Dioxide Nanosheet Coated Carbon Cloth As A Multifunctional Interlayer For Advanced Lithium-Sulfur Batteries

In Situ Preparation and Determination of Electrochemical and Electrochromic Properties of Copper Phthalocyanine-Polyaniline Nanocomposite Films

Structural, optical, morphological, and supercapacitive studies of electrophoretically deposited nanostructured Mn 3 O 4 thin films

High-strength nacre-like composite films based on pre-polymerised polydopamine and polyethyleneimine cross-linked MXene layers via multi-bonding interactions

Asymmetric deposition of manganese oxide in single walled carbon nanotube films as electrodes for flexible high frequency response electrochemical capacitors

Electrostatic layer-by-layer self-assembly multilayer films based on graphene and manganese dioxide sheets as novel electrode materials for supercapacitors

Electrochemically Deposited MoS2 and MnS Multilayers on Nickel Substrates in Inverse Opal Structure as Supercapacitor Microelectrodes

Layer by Layer Ex-Situ Deposited Cobalt-Manganese Oxide as Composite Electrode Material for Electrochemical Capacitor

A Growth Mechanism Investigation on the Anodic Deposition of Nanoporous Gold Supported Manganese Oxide Nanostructures for High Performance Flexible Supercapacitors

Sodium Dodecylbenzene Sulfonate Assisted Electrodeposition of MnO 2 @C Electrode for High Performance Supercapacitor

Facile design of structurally robust, highly conductive and well-flexible hybrid film based on MXene, cellulose nanofiber and poly (3,4-ethylenedioxythiphoenes):polystyrene sulfonate for supercapacitors

Electrochemical Fabrication of a Porous Nanostructured Nickel Hydroxide Film Electrode with Superior Pseudocapacitive Performance

Highly Stable Multi-Wall Carbon Nanotubes@poly(3,4-Ethylenedioxythiophene)/poly(styrene Sulfonate) Core–shell Composites with Three-Dimensional Porous Nano-Network for Electrochemical Capacitors

Electrodeposition mode effects on the electrochemical performance of MnO2–NiO eco-friendly material for supercapacitor electrode application

Scalable Fabrication Of Mno2 Nanostructure Deposited On Free-Standing Ni Nanocone Arrays For Ultrathin, Flexible, High-Performance Micro-Supercapacitort

Fabrication of Sandwiched NiCo-Layered Double Hydroxides/Carbon Nanoballs for Sustainable Energy Storage

Vapor-Phase Polymerized Poly( 3,4-Ethylenedioxythiophene) On A Nickel Nanowire Array Film: Aqueous Symmetrical Pseudocapacitors With Superior Performance

Synthesis of Clustered Mn3O4 Nanoparticles through a Polymer Surfactant Mediated Route on Few-Layer Graphene Nanoplatelet Surface and its Application for Electrochemical Energy Storage: Lithium-ion Battery Anode

Energy storage enabled by cross-linked multilayer films using block copolymer-modified nanocapsules and chitosan biopolymers