Abstract:Background Proton radiotherapy treatment plans are currently restricted by the range uncertainties originating from the stopping power ratio (SPR) prediction based on single‐energy computed tomography (SECT). Various studies have shown that multi‐energy CT (MECT) can reduce the range uncertainties due to medical implant materials and age‐related variations in tissue composition. None of these has directly applied the basis material density (MD) images produced by projection‐based MECT systems for SPR prediction. Purpose To present and evaluate a novel proton SPR prediction method based on MD images from dual‐energy CT (DECT), which could reduce the range uncertainties currently associated with proton radiotherapy. Methods A theoretical basis material decomposition into water and iodine material densities was performed for various pediatric and adult human reference tissues, as well as other non‐tissue materials, by minimizing the root‐mean‐square relative attenuation error in the energy interval from 40 to 140 keV. A model (here called MD‐SPR) mapping predicted MDs to theoretically calculated reference SPRs was created with locally weighted scatterplot smoothing (LOWESS) data‐fitting. The goodness of fit of the MD‐SPR model was evaluated for the included reference tissues. MD images of two electron density phantoms, combined to form a head‐ and an abdomen‐sized phantom setup, were acquired with a clinical projection‐based fast‐kV switching DECT scanner. The MD images were compared to the theoretically predicted MDs of the tissue surrogates and other non‐tissue materials in the phantoms, as well as used for input to the MD‐SPR model for generation of SPR images. The SPR images were subsequently compared to theoretical reference SPRs of the materials in the phantoms, as well as to SPR images from a commercial algorithm (DirectSPR, Siemens Healthineers, Forchheim, Germany) using image‐based consecutive scan DECT for the same phantom setups. Results The predicted SPRs of the tissue surrogates were similar for MD‐SPR and DirectSPR, where the adipose and bone tissue surrogates were within 1% difference to the reference SPRs, while other non‐adipose soft tissue surrogates (breast, brain, liver, muscle) were all underestimated by between −0.7% and −1.8%. The SPRs of the non‐tissue materials (polymethyl methacrylate (PMMA), polyether ether ketone (PEEK), graphite and Teflon) were within 2.8% for MD‐SPR images, compared to 6.8% for DirectSPR. Conclusions The MD‐SPR model performed similar compared to other published methods for the human reference tissues. The SPR prediction for tissue surrogates was similar to DirectSPR and showed potential to improve SPR prediction for non‐tissue materials.

Relative electron density determination using a physics based parameterization of photon interactions in medical DECT

An Experimental Study of Dual-Energy CT Imaging Using Synchrotron Radiation

Experimental validation of two dual-energy CT methods for proton therapy using heterogeneous tissue samples

Feasibility of dose calculation for treatment plans using electron density maps from a novel dual-layer detector spectral CT simulator

One-step Iterative Estimation of Effective Atomic Number and Electron Density for Dual Energy CT

Potential of a Second-Generation Dual-Layer Spectral CT for Dose Calculation in Particle Therapy Treatment Planning

The potential of dual-energy CT to reduce proton beam range uncertainties

Electron density measurement with dual-energy x-ray CT using synchrotron radiation

Physical Density Estimations of Single- and Dual- Energy CT Using Material- Based Forward Projection Algorithm: a Simulation Study

Dual energy CT for a small animal radiation research platform using an empirical dual energy calibration

A direct comparison of multi-energy x-ray and proton CT for imaging and relative stopping power estimation of plastic and ex-vivo phantoms

Relationship between mass density, electron density, and elemental composition of body tissues for Monte Carlo simulation in radiation treatment planning

Prediction of proton stopping power ratios using dual‐energy CT basis material decomposition

Dual-energy CT based mass density and relative stopping power estimation for proton therapy using physics-informed deep learning

Reconstruction and Numerical Calibration of Electron Density Images of Medical Dual-energy CT Based on Δμ-ρe

Enhancement of Stopping Power Ratio (SPR) Estimation Accuracy through Image-Domain Dual-Energy Computer Tomography for Pencil Beam Scanning System: A Simulation Study

Relationship between electron density and effective densities of body tissues for stopping, scattering, and nuclear interaction of proton and ion beams

The potential of photon-counting CT for quantitative contrast-enhanced imaging in radiotherapy

Characterization of breast tissues in density and effective atomic number basis via spectral x-ray computed tomography

Pencil beam kernel-based dose calculations on CT data for a mixed neutron-gamma fission field applying tissue correction factors

Kv–kv and Kv–mv DECT Based Estimation of Proton Stopping Power Ratio – a Simulation Study