Abstract:Drying is the process of moisture removal which is applied to many foodstuffs including fruits and vegetables for preservation and storage purposes. Since solar energy is one type of environmentally friendly renewable energy, open-type solar dryers, natural convective type solar dryers and greenhouse type solar dryers were designed and fabricated in this study for the preservation of fruits and vegetables. A comparative study among various solar drying methods was performed to study the drying performance by maintaining the quality and texture of the dried foodstuffs. Factors such as solar radiation, ambient temperature, moisture in the air, materials used for glazing, inclination, etc., were considered during the fabrication of the solar dryer so that a better estimate of the performance of the solar dryer could be obtained. The lowest drying rate was observed when convective drying was used as an indirect mode of heating. The maximum drying rate observed in open drying was 0.088 kg/kgh, whereas in convective drying under the same conditions, it was 0.03 kg/kgh, which was almost 65% less. This in turn also resulted in the dried samples displaying a better texture and better color. The shrinkage effect on the samples was less pronounced for those samples in the convective dryer than it was for those in the open and greenhouse dryers, as the method uses indirect drying. Comparing convective and greenhouse drying, more shrinkage and a greater browning effect were observed for the open drying method. Out of three types of solar dryers, the greenhouse dryer was selected to study thermal performance because of its better drying rate. DHT11 sensors controlled through Arduino programming were employed in this study to record the temperature and moisture at various locations in the greenhouse dryer setup. The range of energy efficiency of the greenhouse solar dryer was estimated to be from around 15% to 25% on average. This might be due to a greater extent of energy losses. No significant difference was observed in the energy efficiency with respect to the samples used for drying.

Performance evaluation of photovoltaic thermal greenhouse dryer and development of characteristic curve

Modelling and analysis of photovoltaic-thermal-thermoelectric-cooler air collector integrated mixed-mode greenhouse dryer with heat storage material

Design, Development and Evaluation of Photovoltaic Integrated Solar Greenhouse Dryer for Paddy

Performance analysis of a photovoltaic thermal-thermoelectric cooler air collector integrated with a mixed-mode greenhouse solar dryer

Experimental Investigation on a Solar Assisted Heat Pump In-Store Drying System

Experimental and computational validation of thermal performance of an active greenhouse solar dryer in no-load conditions

A comparative assessment of distributive mode active solar dryers: Flat plate collector vs evacuated tube collector with thermal energy storage and perforated baffled trays

Efficient simulation of bitter gourd drying in active solar dryer: A state-of-the-art model

Performance Evaluation of Indirect Solar Dryer under Passive and Active Modes during Drying Beetroot Slices

Thermal Performance of a Flat-Plate Solar Collector for Drying Agricultural Crops

Experimental and numerical study of thermal performance of a solar rotary dryer with thermal storage mechanism

Performance Analysis and Identification of an Indirect Photovoltaic Thermal Dryer with Aluminum Oxide Nano-Embedded Thermal Energy Storage Modification

Performance analyses of sustainable PV/T assisted heat pump drying system

Performance optimization for solar photovoltaic thermal system with spiral rectangular absorber using Taguchi method

Performance evaluation of a solar photovoltaic system

Study of a mixed-mode solar dryer integrated with photovoltaic powered dehumidifier

Investigation of the Performance of Photovoltaic/Thermal System by A Coupled Trnsys and Cfd Simulation

A Comparative Management Analysis on the Performance of Different Solar Drying Methods for Drying Vegetables and Fruits

Exergetic, sustainability and exergoeconomic analyses of a fully photovoltaic-powered heat pump tumble dryer

Performance analysis of flat-plate and V-groove solar air collector through CFD simulation

Thermal Performance of Indirect Forced Convection Solar Dryer and Kinetics Analysis of Mango