Abstract:Dynamometers are used to evaluate the real-world performances of drivetrains in various loading conditions. Due to its superior power density, high bandwidth, and design flexibility, a hydrostatic power-regenerative dynamometer is an ideal candidate for hydrostatic wind turbine transmission testing. A dynamometer can emulate the wind turbine rotor dynamics and allow the investigation of the performance of a unique hydrostatic drivetrain without actually building the physical system. The proposed dynamometer is an energy-efficient system with counter-intuitive control challenges. This paper presents the dynamics, control synthesis, and experimental validation of a power-regenerative hydrostatic dynamometer. A fourth-order non-linear model with three inputs was formulated for the dynamometer. The strength of input–output couplings was identified, and two different decoupling controllers were designed and implemented. During wind turbine testing, the synchronous generator turns at a constant speed and the system model is linear. A steady-state decoupling controller was developed for independent control of the drive and transmission. The implemented decoupling controller demonstrated a negligible change in rotor speed for a 40 bar step increase in pressure, but a 20 bar pressure spike for a 4 rpm step change in rotor speed. However, during starting and stopping, the synchronous generator speed is not constant, and the system model is nonlinear. Therefore, a steady-state decoupling controller will not work. Thus, a decentralized controller with feed-forward control and gain scheduling was designed and implemented. A reference command was designed to avoid cavitation, pressure spikes, and power flow reversal during start-up. The experimental results show precise tracking in steady-state and transient operations. The decentralized controller demonstrated a negligible change in rotor speed for a 40 bar step increase in pressure but a 100 bar pressure spike for a 4 rpm step increase in rotor speed. The pressure spike was reduced by 80 bar with the implementation of feed-forward gain. The proposed electro-hydro-mechanical system requires less power and has the potential to reduce energy expenditure by 50%.

Experimental Validation of a Hydrostatic Transmission for Community Wind Turbines

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

Feasibility of Hydrostatic Transmission in Community Wind Turbines

Research on an Integrated Hydrostatic-Driven Electric Generator with Controllable Load for Renewable Energy Applications

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

A Novel Hydraulic Transmission Solution to Large Offshore Wind Turbine: Design and Control Strategy

Modeling and control of the wind turbine with the Direct Drive Permanent Magnet Generator integrated to power grid

Hybrid Power Transmission Technology in a Wind Turbine Generation System

Improving the Reliability and Energy Production of Large Wind Turbine with a Digital Hydrostatic Drivetrain

RETRACTION: Design and Experiments of a Hybrid Wind Turbine Drive Train using both Hydraulic and Mechanical Transmissions

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines

Dynamics and Control of an Energy-Efficient, Power-Regenerative, Hydrostatic Wind Turbine Dynamometer

Output Power Control for Hydro-Viscous Transmission Based Continuously Variable Speed Wind Turbine

A Novel Hydraulic-Mechanical Hybrid Transmission in Tidal Current Turbines

An experimental study of the characteristics of hydrostatic transmission systems

Design of Hydraulic Transmission Systems for Tidal Current Turbines and Its Simulation Validation

Steady-state Characteristics Study of a Power Split Hydraulic Transmission

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

A Compact Hydro-Mechanical Transmission Solution to Wheel Loader Propulsion System and Its Control Strategy

Modeling And Experimental Study Of A Novel Power Split Hydraulic Transmission

APPLICATION AND SIMULATION OF POWER SPLIT IN HYBRID TRANSMISSION WIND TURBINES