Abstract:Silicic acid-based tanning system is an effective and promising chrome-free tanning technology, and it is urgent to develop compatible post-tanning processes. Fatliquoring is one of the key procedures to determine the quality of resulted leather and fatliquoring agents mainly play the role of an effective softer/ plasticizer in leather production. However, there is a mismatch between most commercial fatliquoring agents (mainly compatible with chrome tanned leather) and silicic acid tanned leather (named SATL). Herein, an amphoteric polymer emulsion (APE) was prepared by free radical polymerization using methacryloxyethyl trimethyl ammonium chloride (DMC), 2-acrylamido-2-methylpropanesulfonate (AMPS), lauryl methacrylate (LMA), dimethylaminoethyl methacrylate (DMAEMA) as monomers. And in order to improve the lubricating property, APE was further compounded with castor oil to obtain an amphoteric fatliquoring agent (named COAPE). Comprehensive characterization showed that the amphoteric (pI=8.22) and amphiphilic APE could reduce the surface tension of water to 38.6 mN/m. The fatliquoring process was controlled by ingenious regulation of pH based on isoelectric points (pIs) of APE and SATL. In the initial stage, the pH of the bath was adjusted to be lower than the pIs of APE and SATL, amphoteric polymer molecules could easily penetrate into SATL leather as they are all positively charged. While during the fixing stage, the pH of the bath was adjusted between the pIs of APE and SATL, so the electrostatic interaction between amphoteric polymer molecules and SATL leather, as well as the aggregation of amphoteric polymers can promote their combination synergistically. As a fatliquoring agent, the application of COAPE demonstrated that its absorpotion rate (90.5%) was much higher than anionic commercial fatliquoring agent (63.2%), thus imparting SATL leather better softness (6.5 mm), elongation at break (95.5%) and tensile strength (11.6 N/mm2). These findings therefore provided scientific basis and technical support for the application of amphoteric materials to silicic acid-modified collagen matrix and would promote the practical application of silicic acid-based chrome-free tanning technology

Effect of using fresh palm oil and used palm oil as a fat liquoring agent to the chemical quality of leather from tilapia fish skin

Effect of using fresh palm oil and used palm oil as a fatliquoring agent to the physical quality of tilapia fish skin in vegetable tannery

Emulsification Through Oil Addition on the Properties of Yellowfin Tuna ( Thunnus Albacares ) Paste

EFFECTS OF SUBSTITUTING PALM OIL FOR FISH OIL AND SOY OIL IN FEED ON THE GROWTH PERFORMANCE AND MUSCULAR FATTY ACID COMPOSITION OF PELTEOBAGRUS VACHELLI

Fish oil extraction as a by-product of Tilapia (Oreochromis sp.) fish processing with dry rendering method

RESEARCH ARTICLE Preparation , application and quantification of retanning products from skin fleshing hydrolyzed protein: A Process Optimization for waste recycling from tanneries into products

Application and valorization of novel indigenous Azadirachta indica leaf in leather processing

The Impact of Cashew Nut (Anacardium occidentale) Testa Tannin Feeding Ratio on the Chemical and Mechanical Characteristics of Leather Tanned from Cowhide, Goatskin and Sheepskin

Reduction of Pollutants in the Tanning Industry Using the Reverse Tanning Method against the Physical Properties of Leather

Evaluation of the efficiency of polyacrylamide and poly(MMA-HEMA) for the consolidation of vegetable-tanned leather artifacts

Increasing Functionality of Fish Leather by Chemical Surface Modifications

Physicochemical and Volatile Flavor Properties of Fish Skin under Conventional Frying, Air Frying and Vacuum Frying

Preparation of castor oil-based fatliquoring agent via a Pickering emulsion method for use in leather coating

Interaction between Amphoteric Polymer and Silicic Acid Tanned Leather

Sustainable leather tanning: Enhanced properties and pollution reduction through crude protease enzyme treatment

The quality of palm oil on variations in temperature and duration of the separation process

Drying of residual tilapia skin from filleting using a thermophotovoltaic solar dehydrator

Bio-intervention phyto-based material for raw goatskin preservation: a cleaner-sustainable approach

Textural quality, growth parameters and oxidative responses in Nile tilapia ( Oreochromis niloticus ) fed faba bean water extract diet

Preparation of Sheepskin Unhairing Extracts from Locally Available Plants: Cleaner Leather Processing

Physicochemical characteristic of modified edible film made from gelatine of sea bass (Lates calcarifer) residue with palmitic acid and soybean protein isolate treatment