Abstract:Constructing stable co-continuous morphology of commercial immiscible polymer blends remains an ongoing challenge in terms of complex presynthetic routes, multiple parameter dependency, and intrinsic instability of phase morphology. Herein, we demonstrate a full biodegradable polymer blend, poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate), where hitherto inaccessible co-continuous with asymmetric compositions (70/30) can be obtained with the assistance of interfacial stereocomplex crystallites (i-SCs) through reactive blending. By taking full advantages of this unprecedented compatibilizer, nanostructured co-continuous blends with synergistically enhanced comprehensive performance are achieved. First, due to the "rigid" i-SC, co-continuous morphology is induced through a simple melt blending procedure; second, considerable augmentation of the crystallization rate of the PLA matrix is accomplished on account of the in situ formed nucleation agent (i.e., i-SC); third, a super toughened material with simultaneously enhanced tensile strength, ductility, and impact strength can be acquired, resulting from the i-SC-induced co-continuous morphology; and fourth, i-SC can function as a "rigid" supporting layer between phases even above 200 °C, resulting in significantly enhanced morphology stability in melt. The versatile, facile, and practical strategy offers an industrially relevant technique to fabricate super-robust and fully biobased polymer materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.0c02861?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.0c02861</a>.Molecular formula of reactive compatibilizers: SG, SG-g-PLLA, and SG-g-PDLA, and the corresponding grafted product through reactive blending: SG-g-PLLA-g-PBAT and SG-g-PDLA-g-PBAT; torque values versus time of PBAT/SG (50/6) blends and PLLA/SG (50/6) recorded during melt blending; 1H NMR spectra of SG, PDLA, PBAT, and grafted copolymer after sequential reactive blending and selective extraction of free PLAs and PBAT by acetonitrile and toluene, respectively; stress–strain curves of LSB-blend and DSB-blend specimens; digital picture of the LSB-blend and DSB-blend after impacted measurements; SEM images for impact-fractured surfaces of LSB-blends and DSB-blends; stress–strain curves and notch impact strength of the DSB-blend with the SC located in the PLA matrix and anchoring at the PLA-PBAT interface; mechanical parameters for the pristine blend, LSB-blend, and DSB-blend; and mechanical and thermo parameters for super-toughened PLA/biobased (70/30) polymer blends (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.0c02861/suppl_file/ma0c02861_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Potential of a bio-disintegrable polymer blend using alkyl-chain-modified lignin

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Fractionation of technical lignin and its application on the lignin/poly-(butylene adipate-co-terephthalate) bio-composites

Multifunctional lignin-poly (lactic acid) biocomposites for packaging applications

Characterization and 3D printing of a biodegradable polylactic acid/thermoplastic polyurethane blend with laccase-modified lignin as a nucleating agent

Thermal and mechanical properties of polyethylene glycol (PEG)-modified lignin/polylactic acid (PLA) biocomposites

Production and functionalization strategies for superior polyhydroxybutyrate blend performance

Enhancing Mechanical Performance of High-Lignin-Filled Polypropylene via Reactive Extrusion

Utilization of lignin upon successive fractionation and esterification in polylactic acid (PLA)/lignin biocomposite

Effect of acetylation of kraft lignin on the blend compatibility with cellulose acetate and the resulting physicomechanical properties

Organosolv Lignin Improved Thermoplastic Elastomeric Behavior of Polyethylene/Polyisoprene Blend

3D printed lignin/polymer composite with enhanced mechanical and anti-thermal-aging performance

Esterification of Lignin Isolated by Deep Eutectic Solvent Using Fatty Acid Chloride, and Its Composite Film with Poly(lactic acid)

Stable Co-Continuous PLA/PBAT Blends Compatibilized by Interfacial Stereocomplex Crystallites: Toward Full Biodegradable Polymer Blends with Simultaneously Enhanced Mechanical Properties and Crystallization Rates

Construction of highly ductile, UV-shielding polylactide/poly(butylene adipate- co -terephthalate) biocomposites with hyperbranched polysiloxane functionalized lignin as a biocompatibilizer

Sodium-Alginate-Doped Lignin Nanoparticles for PBAT Composite Films to Dually Enhance Tensile Strength and Elongation Performance with Functionality

Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic Acid) Composites

A Polyphosphoramide-Grafted Lignin Enabled Thermostable and Fire-Retardant Polylactide with Preserved Mechanical Properties

Valorization of Industrial Lignin as Biobased Carbon Source in Fire Retardant System for Polyamide 11 Blends

Wood−Derived Polymers from Olefin−Functionalized Lignin and Ethyl Cellulose via Thiol–Ene Click Chemistry

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion