A complete bacterial genome assembled de novo using only nanopore sequencing data

Nicholas J Loman,Joshua Quick,Jared T Simpson

DOI: https://doi.org/10.1038/nmeth.3444

IF: 48

2015-06-15

Nature Methods

Abstract:By error-correcting long nanopore reads and calling a consensus sequence using nanopore signal data, an entire bacterial genome is assembled de novo.

biochemical research methods

What problem does this paper attempt to address?

Oxford Nanopore sequencing, hybrid error correction, and de novo assembly of a eukaryotic genome

Sara Goodwin,James Gurtowski,Scott Ethe-Sayers,Panchajanya Deshpande,Michael C. Schatz,W. Richard McCombie

DOI: https://doi.org/10.1101/gr.191395.115

IF: 9.438

2015-10-07

Genome Research

Abstract:Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available, and we used this for sequencing the Saccharomyces cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr specifically for Oxford Nanopore reads, because existing packages were incapable of assembling the long read lengths (5–50 kbp) at such high error rates (between ∼5% and 40% error). With this new method, we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: The contig N50 length is more than ten times greater than an Illumina-only assembly (678 kb versus 59.9 kbp) and has >99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

genetics & heredity,biochemistry & molecular biology,biotechnology & applied microbiology
Nanopore sequencing and assembly of a human genome with ultra-long reads

Miten Jain,S Koren,J Quick,AC Rand,TA Sasani,JR Tyson,AD Beggs,AT Dilthey,IT Fiddes,S Malla,H Marriott,KH Miga,T Nieto,J O’Grady,HE Olsen,BS Pedersen,A Rhie,H Richardson,AR Quinlan,TP Snutch,L Tee,B Paten,AM Phillippy,JT Simpson,NJ Loman,M Loose

DOI: https://doi.org/10.1101/128835

2017-04-20

Abstract:Abstract Nanopore sequencing is a promising technique for genome sequencing due to its portability, ability to sequence long reads from single molecules, and to simultaneously assay DNA methylation. However until recently nanopore sequencing has been mainly applied to small genomes, due to the limited output attainable. We present nanopore sequencing and assembly of the GM12878 Utah/Ceph human reference genome generated using the Oxford Nanopore MinION and R9.4 version chemistry. We generated 91.2 Gb of sequence data (∼30× theoretical coverage) from 39 flowcells. De novo assembly yielded a highly complete and contiguous assembly (NG50 ∼3Mb). We observed considerable variability in homopolymeric tract resolution between different basecallers. The data permitted sensitive detection of both large structural variants and epigenetic modifications. Further we developed a new approach exploiting the long-read capability of this system and found that adding an additional 5×-coverage of ‘ultra-long’ reads (read N50 of 99.7kb) more than doubled the assembly contiguity. Modelling the repeat structure of the human genome predicts extraordinarily contiguous assemblies may be possible using nanopore reads alone. Portable de novo sequencing of human genomes may be important for rapid point-of-care diagnosis of rare genetic diseases and cancer, and monitoring of cancer progression. The complete dataset including raw signal is available as an Amazon Web Services Open Dataset at: https://github.com/nanopore-wgs-consortium/NA12878 .
Oxford Nanopore R10.4 long-read sequencing enables the generation of near-finished bacterial genomes from pure cultures and metagenomes without short-read or reference polishing

Mantas Sereika,Rasmus Hansen Kirkegaard,Søren Michael Karst,Thomas Yssing Michaelsen,Emil Aarre Sørensen,Rasmus Dam Wollenberg,Mads Albertsen

DOI: https://doi.org/10.1038/s41592-022-01539-7

IF: 48

2022-07-05

Nature Methods

Abstract:Long-read Oxford Nanopore sequencing has democratized microbial genome sequencing and enables the recovery of highly contiguous microbial genomes from isolates or metagenomes. However, to obtain near-finished genomes it has been necessary to include short-read polishing to correct insertions and deletions derived from homopolymer regions. Here, we show that Oxford Nanopore R10.4 can be used to generate near-finished microbial genomes from isolates or metagenomes without short-read or reference polishing.

biochemical research methods
Hybrid De Novo Genome Assembly for the Generation of Complete Genomes of Urinary Bacteria using Short- and Long-read Sequencing Technologies

Belle M Sharon,Neha V Hulyalkar,Vivian H Nguyen,Philippe E Zimmern,Kelli L Palmer,Nicole J De Nisco

DOI: https://doi.org/10.3791/62872

2021-08-20

Abstract:Complete genome sequences provide valuable data for the understanding of genetic diversity and unique colonization factors of urinary microbes. These data may include mobile genetic elements, such as plasmids and extrachromosomal phage, that contribute to the dissemination of antimicrobial resistance and further complicate treatment of urinary tract infection (UTI). In addition to providing fine resolution of genome structure, complete, closed genomes allow for the detailed comparative genomics and evolutionary analyses. The generation of complete genomes de novo has long been a challenging task due to limitations of available sequencing technology. Paired-end Next Generation Sequencing (NGS) produces high quality short reads often resulting in accurate but fragmented genome assemblies. On the contrary, Nanopore sequencing provides long reads of lower quality normally leading to error-prone complete assemblies. Such errors may hamper genome-wide association studies or provide misleading variant analysis results. Therefore, hybrid approaches combining both short and long reads have emerged as reliable methods to achieve highly accurate closed bacterial genomes. Reported herein is a comprehensive method for the culture of diverse urinary bacteria, species identification by 16S rRNA gene sequencing, extraction of genomic DNA (gDNA), and generation of short and long reads by NGS and Nanopore platforms, respectively. Additionally, this method describes a bioinformatic pipeline of quality control, assembly, and gene prediction algorithms for the generation of annotated complete genome sequences. Combination of bioinformatic tools enables the selection of high quality read data for hybrid genome assembly and downstream analysis. The streamlined approach for the hybrid de novo genome assembly described in this protocol may be adapted for the use in any culturable bacteria.
Efficient assembly of nanopore reads via highly accurate and intact error correction

Ying Chen,Fan Nie,Shang-Qian Xie,Ying-Feng Zheng,Qi Dai,Thomas Bray,Yao-Xin Wang,Jian-Feng Xing,Zhi-Jian Huang,De-Peng Wang,Li-Juan He,Feng Luo,Jian-Xin Wang,Yi-Zhi Liu,Chuan-Le Xiao

DOI: https://doi.org/10.1038/s41467-020-20236-7

IF: 16.6

2021-01-04

Nature Communications

Abstract:Abstract Long nanopore reads are advantageous in de novo genome assembly. However, nanopore reads usually have broad error distribution and high-error-rate subsequences. Existing error correction tools cannot correct nanopore reads efficiently and effectively. Most methods trim high-error-rate subsequences during error correction, which reduces both the length of the reads and contiguity of the final assembly. Here, we develop an error correction, and de novo assembly tool designed to overcome complex errors in nanopore reads. We propose an adaptive read selection and two-step progressive method to quickly correct nanopore reads to high accuracy. We introduce a two-stage assembler to utilize the full length of nanopore reads. Our tool achieves superior performance in both error correction and de novo assembling nanopore reads. It requires only 8122 hours to assemble a 35X coverage human genome and achieves a 2.47-fold improvement in NG50. Furthermore, our assembly of the human WERI cell line shows an NG50 of 22 Mbp. The high-quality assembly of nanopore reads can significantly reduce false positives in structure variation detection.

multidisciplinary sciences
A Pipeline for Completing Bacterial Genomes Using in Silicoand Wet Lab Approaches

Rutika Puranik,Guangri Quan,Jacob Werner,Rong Zhou,Zhaohui Xu

DOI: https://doi.org/10.1186/1471-2164-16-s3-s7

IF: 4.547

2015-01-01

BMC Genomics

Abstract:Background Despite the large volume of genome sequencing data produced by next-generation sequencing technologies and the highly sophisticated software dedicated to handling these types of data, gaps are commonly found in draft genome assemblies. The existence of gaps compromises our ability to take full advantage of the genome data. This study aims to identify a practical approach for biologists to complete their own genome assemblies using commonly available tools and resources. Results A pipeline was developed to assemble complete genomes primarily from the next generation sequencing (NGS) data. The input of the pipeline is paired-end Illumina sequence reads, and the output is a high quality complete genome sequence. The pipeline alternates the employment of computational and biological methods in seven steps. It combines the strengths of de novo assembly, reference-based assembly, customized programming, public databases utilization, and wet lab experimentation. The application of the pipeline is demonstrated by the completion of a bacterial genome, Thermotoga sp. strain RQ7, a hydrogen-producing strain. Conclusions The developed pipeline provides an example of effective integration of computational and biological principles. It highlights the complementary roles that in silico and wet lab methodologies play in bioinformatical studies. The constituting principles and methods are applicable to similar studies on both prokaryotic and eukaryotic genomes.
Gapless assembly of complete human and plant chromosomes using only nanopore sequencing

Sergey Koren,Zhigui Bao,Andrea Guarracino,Shujun Ou,Sara Goodwin,Katharine M. Jenike,Julian Lucas,Brandy McNulty,Jimin Park,Mikko Rautiainen,Arang Rhie,Dick Roelofs,Harrie Schneiders,Ilse Vrijenhoek,Koen Nijbroek,Doreen Ware,Michael C. Schatz,Erik Garrison,Sanwen Huang,W. Richard McCombie,Karen H. Miga,Alexander H.J. Wittenberg,Adam M. Phillippy

DOI: https://doi.org/10.1101/2024.03.15.585294

2024-03-19

Abstract:The combination of ultra-long Oxford Nanopore (ONT) sequencing reads with long, accurate PacBio HiFi reads has enabled the completion of a human genome and spurred similar efforts to complete the genomes of many other species. However, this approach for complete, “telomere-to-telomere” genome assembly relies on multiple sequencing platforms, limiting its accessibility. ONT “Duplex” sequencing reads, where both strands of the DNA are read to improve quality, promise high per-base accuracy. To evaluate this new data type, we generated ONT Duplex data for three widely-studied genomes: human HG002, Heinz 1706 (tomato), and B73 (maize). For the diploid, heterozygous HG002 genome, we also used “Pore-C’’ chromatin contact mapping to completely phase the haplotypes. We found the accuracy of Duplex data to be similar to HiFi sequencing, but with read lengths tens of kilobases longer, and the Pore-C data to be compatible with existing diploid assembly algorithms. This combination of read length and accuracy enables the construction of a high-quality initial assembly, which can then be further resolved using the ultra-long reads, and finally phased into chromosome-scale haplotypes with Pore-C. The resulting assemblies have a base accuracy exceeding 99.999% (Q50) and near-perfect continuity, with most chromosomes assembled as single contigs. We conclude that ONT sequencing is a viable alternative to HiFi sequencing for genome assembly, and has the potential to provide a single-instrument solution for the reconstruction of complete genomes.

Bioinformatics
Oxford nanopore long-read sequencing enables the generation of complete bacterial and plasmid genomes without short-read sequencing

Wenxuan Zhao,Wei Zeng,Bo Pang,Ming Luo,Yao Peng,Jialiang Xu,Biao Kan,Zhenpeng Li,Xin Lu

DOI: https://doi.org/10.3389/fmicb.2023.1179966

IF: 5.2

2023-05-15

Frontiers in Microbiology

Abstract:Introduction: Genome-based analysis is crucial in monitoring antibiotic-resistant bacteria (ARB)and antibiotic-resistance genes (ARGs). Short-read sequencing is typically used to obtain incomplete draft genomes, while long-read sequencing can obtain genomes of multidrug resistance (MDR) plasmids and track the transmission of plasmid-borne antimicrobial resistance genes in bacteria. However, long-read sequencing suffers from low-accuracy base calling, and short-read sequencing is often required to improve genome accuracy. This increases costs and turnaround time. Methods: In this study, a novel ONT sequencing method is described, which uses the latest ONT chemistry with improved accuracy to assemble genomes of MDR strains and plasmids from long-read sequencing data only. Three strains of Salmonella carrying MDR plasmids were sequenced using the ONT SQK-LSK114 kit with flow cell R10.4.1, and de novo genome assembly was performed with average read accuracy (Q > 10) of 98.9%. Results and Discussion: For a 5-Mb-long bacterial genome, finished genome sequences with accuracy of >99.99% could be obtained at 75× sequencing coverage depth using Flye and Medaka software. Thus, this new ONT method greatly improves base-calling accuracy, allowing for the de novo assembly of high-quality finished bacterial or plasmid genomes without the need for short-read sequencing. This saves both money and time and supports the application of ONT data in critical genome-based epidemiological analyses. The novel ONT approach described in this study can take the place of traditional combination genome assembly based on short- and long-read sequencing, enabling pangenomic analyses based on high-quality complete bacterial and plasmid genomes to monitor the spread of antibiotic-resistant bacteria and antibiotic resistance genes.

microbiology
Evaluation of the accuracy of bacterial genome reconstruction with Oxford Nanopore R10.4.1 long-read-only sequencing

Nicholas D. Sanderson,Katie M.V. Hopkins,Matthew Colpus,Melody Parker,Samuel Lipworth,Derrick Crook,Nicole Stoesser

DOI: https://doi.org/10.1099/mgen.0.001246

IF: 4.868

2024-05-08

Microbial Genomics

Abstract:Whole-genome reconstruction of bacterial pathogens has become an important tool for tracking transmission and antimicrobial resistance gene spread, but highly accurate and complete assemblies have largely only historically been achievable using hybrid long- and short-read sequencing. We previously found the Oxford Nanopore Technologies (ONT) R10.4/kit12 flowcell/chemistry produced improved assemblies over the R9.4.1/kit10 combination, however long-read only assemblies contained more errors compared to Illumina-ONT hybrid assemblies. ONT have since released an R10.4.1/kit14 flowcell/chemistry upgrade and recommended the use of Bovine Serum Albumin (BSA) during library preparation, both of which reportedly increase accuracy and yield. They have also released updated basecallers trained using native bacterial DNA containing methylation sites intended to fix systematic basecalling errors, including common adenosine (A) to guanine (G) and cytosine (C) to thymine (T) substitutions. To evaluate these improvements, we successfully sequenced four bacterial reference strains, namely Escherichia coli , Klebsiella pneumoniae , Pseudomonas aeruginosa and Staphylococcus aureus , and nine genetically diverse E. coli bloodstream infection-associated isolates from different phylogroups and sequence types, both with and without BSA. These sequences were de novo assembled and compared against Illumina-corrected reference genomes. In this small evaluation of 13 isolates we found that nanopore long-read-only R10.4.1/kit 14 assemblies with updated basecallers trained using bacterial methylated DNA produce accurate assemblies with ≥40×depth, sufficient to be cost-effective compared with hybrid ONT/Illumina sequencing in our setting.

microbiology,genetics & heredity
Matching Excellence: ONT’s Rise to Parity with PacBio in Genome Reconstruction of Non-Model Bacterium with High GC Content

Axel Soto-Serrano,Wenwen Li,Farhad M. Panah,Yan Hui,Pablo Atienza,Alexey Fomenkov,Richard J. Roberts,Paulina Deptula,Lukasz Krych

DOI: https://doi.org/10.1101/2024.02.26.582104

2024-02-27

Abstract:Reconstruction of complete bacterial genomes is a vital aspect of microbial research, as it provides complex information about genetic content, gene ontology, and regulation. It has become a domain of 3rd generation, long-read sequencing platforms, as short-read technologies can deliver mainly fragmented genomes. PacBio platform can provide high-quality complete genomes, yet remains one of the most expensive sequencing strategies. Oxford Nanopore Technology (ONT) offers the advantage of producing the longest reads, being at the same time the most cost-effective option in terms of platform costs, as well as library preparation, and sequencing. However, ONTs error rate, although significantly reduced lately, still holds a certain level of distrust in the scientific community. In recent years, hybrid assembly of Nanopore and Illumina data has been used to solve ONTs issue with error rate and has yielded the best results in terms of genome completeness, quality, and price. However, the latest advancements in Nanopore technology, including new flow cells (R10.4.1), new library preparation chemistry (V14) and duplex-mode, updated basecallers (Dorado v0.4.1), and the realization that sequencing in dark mode results in significantly increased throughput, have had a significant impact on the quality of generated data and, thus, the recovery of complete genomes by ONT sequencing alone. In this study, we compared the data generated by ONT using three sequencing strategies (Native barcoding, RAPID barcoding, and custom-developed: BARSEQ) against PacBio and Illumina (NextSeq) as well as Illumina-ONT hybrid data. For this purpose, we employed three strains of the actinobacteria , whose genomes have been proven difficult to reconstruct due to high GC content, regions of repeated sequences and massive genome rearrangements. Our data indicate that DNA libraries prepared with the native barcoding kit, sequenced with V14 chemistry on R10.4.1 flow cell, and assembled with Flye resulted in the reconstruction of complete genomes of overall quality highly similar to that of genomes reconstructed with PacBio. The highest level of quality can be achieved by hybrid assembly of data from the Native barcoding kit complemented with data from custom-developed BARSEQ, both sequenced on R10.4.1 flow cell. In conclusion, our results demonstrate that ONT can be used as a cost-effective sequencing strategy, without the need for complementing with other sequencing technologies, for the reconstruction of complete genomes of the highest quality.

Genomics
UNAGI: Yeast Transcriptome Reconstruction and Gene Discovery Using Nanopore Sequencing

Mohamad Al Kadi,Nicolas Jung,Daisuke Okuzaki

DOI: https://doi.org/10.1007/978-1-0716-2257-5_6

Abstract:Computational approaches are the main approaches used in genome annotation. However, accuracy is low. Untranslated regions are not identified, complex isoforms are not predicted correctly and discovery rate of noncoding RNA is low. RNA-seq has revolutionized transcriptome reconstruction over the last decade. However, fragmentation included in cDNA sequencing leads to information loss, requiring transcripts to be assembled and reconstructed, thus affecting the accuracy of reconstructed transcriptome. Recently, long-read sequencing has been introduced with technologies such as Oxford Nanopore sequencing. cDNA is sequenced directly without fragmentation producing long reads that don't need to be assembled keeping the transcript structure intact and increasing the accuracy of transcriptome reconstruction.Here we present a protocol and a pipeline to reconstruct the transcriptome of compact genomes including yeasts. It involves generating full-length cDNA and using Oxford Nanopore ligation-based sequencing kit to sequence multiple samples in the same run. The pipeline (1) strands the generated long reads, (2) corrects the reads by mapping them to the reference genome, (3) identifies transcripts including 5'UTR and 3'UTR, (4) profiles the isoforms, filtering out artifacts resulting from low accuracy in sequencing, and (5) improves accuracy of provided annotations. Using long reads improves the accuracy of transcriptome reconstruction and helps in discovering a significant number of novel RNAs.
Matching excellence: Oxford Nanopore Technologies' rise to parity with Pacific Biosciences in genome reconstruction of non-model bacterium with high G+C content

Axel Soto-Serrano,Wenwen Li,Farhad M. Panah,Yan Hui,Pablo Atienza,Alexey Fomenkov,Richard J. Roberts,Paulina Deptula,Lukasz Krych

DOI: https://doi.org/10.1099/mgen.0.001316

IF: 4.868

2024-11-13

Microbial Genomics

Abstract:The reconstruction of complete bacterial genomes is essential for microbial research, offering insights into genetic content, ontology and regulation. While Pacific Biosciences (PacBio) provides high-quality genomes, its cost remains a limitation. Oxford Nanopore Technologies (ONT) offers long reads at a lower cost, yet its error rate raises scepticism. Recent ONT advancements, such as new Flow cells (R10.4.1), chemistry (V14) and duplex mode, improve data quality. Our study compares ONT with PacBio and Illumina, including hybrid data. We used Propionibacterium freudenreichii , a bacterium with a genome known for being difficult to reconstruct. By combining data from ONT's Native Barcoding and a custom-developed BARSEQ method, we achieved high-quality, near-perfect genome assemblies. Our findings demonstrate, for the first time, that the combination of nanopore-only long-native with shorter PCR DNA reads (~3 kb) results in high-quality genome reconstruction, comparable to hybrid data assembly from two sequencing platforms. This endorses ONT as a cost-effective, stand-alone strategy for bacterial genome reconstruction. Additionally, we compared methylated motif detection between PacBio and ONT R10.4.1 data, showing that results comparable to PacBio are achievable using ONT, especially when utilizing the advanced Nanomotif tool.

microbiology,genetics & heredity
Technical report on best practices for hybrid and long read de novo assembly of bacterial genomes utilizing Illumina and Oxford Nanopore Technologies reads

Kay Nieselt,Simon Tim Hackl,Theresa Anisja Harbig

DOI: https://doi.org/10.1101/2022.10.25.513682

2022-10-27

bioRxiv

Abstract:The emergence of commercial long read sequencing technologies in the 2010s and the concomitant development of new bioinformatics tools bears the potential of de novo genome assemblies of unprecedented contiguity and quality. However, until today these novel technologies suffer from high rates of sequencing errors. These may be overcome by using long and short reads in combination, in so called hybrid approaches, or by increasing the throughput and thereby the coverage of sequencing runs. In particular the latter will thereby increase the cost of the assembly inevitably. Herein, to-date long read and hybrid assemblers were tested on real whole genome sequencing Illumina and Oxford Nanopore Technologies read data sets and sub samples of these in order to elaborate a best practice for de novo assembly. The findings suggest that although long reads alone can be used to reconstruct complete and contiguous genomes, in particular the single-nucleotide and indel error rate remains high compared to hybrid approaches and that this can impact downstream applications such as variation discovery and gene prediction negatively.
MAECI: A Pipeline for Generating Consensus Sequence with Nanopore Sequencing Long-read Assembly and Error Correction

Jidong Lang

DOI: https://doi.org/10.1371/journal.pone.0267066

IF: 3.7

2022-01-01

PLoS ONE

Abstract:Nanopore sequencing produces long reads and offers unique advantages over next -generation sequencing, especially for the assembly of draft bacterial genomes with improved completeness. However, assembly errors can occur due to data characteristics and assembly algorithms. To address these issues, we developed MAECI, a pipeline for generating consensus sequences from multiple assemblies of the same nanopore sequencing data and error correction. Systematic evaluation showed that MAECI is an efficient and effective pipeline to improve the accuracy and completeness of bacterial genome assemblies. The available codes and implementation are at https://github.com/langjidong/MAECI.
Reducing assembly complexity of microbial genomes with single-molecule sequencing

Sergey Koren,Gregory P Harhay,Timothy PL Smith,James L Bono,Dayna M Harhay,D. Scott Mcvey,Diana Radune,Nicholas H Bergman,Adam M Phillippy

DOI: https://doi.org/10.48550/arXiv.1304.3752

IF: 4.31

2013-04-13

Genomics

Abstract:Background: The short reads output by first- and second-generation DNA sequencing instruments cannot completely reconstruct microbial chromosomes. Therefore, most genomes have been left unfinished due to the significant resources required to manually close gaps in draft assemblies. Third-generation, single-molecule sequencing addresses this problem by greatly increasing sequencing read length, which simplifies the assembly problem. Results: To measure the benefit of single-molecule sequencing on microbial genome assembly, we sequenced and assembled the genomes of six bacteria and analyzed the repeat complexity of 2,267 complete bacteria and archaea. Our results indicate that the majority of known bacterial and archaeal genomes can be assembled without gaps, at finished-grade quality, using a single PacBio RS sequencing library. These single-library assemblies are also more accurate than typical short-read assemblies and hybrid assemblies of short and long reads. Conclusions: Automated assembly of long, single-molecule sequencing data reduces the cost of microbial finishing to $1,000 for most genomes, and future advances in this technology are expected to drive the cost lower. This is expected to increase the number of completed genomes, improve the quality of microbial genome databases, and enable high-fidelity, population-scale studies of pan-genomes and chromosomal organization.
Using MinION Nanopore Sequencing to Generate a De Novo Eukaryotic Draft Genome: Preliminary Physiological and Genomic Description of the Extremophilic Red Alga Galdieria Sulphuraria Strain SAG 107.79

Amanda M. Davis,Manuela Iovinella,Sally James,Thomas Robshaw,Jennifer R. Dodson,Lorenzo Herrero-Davila,James H. Clark,Maria Agapiou,Simon J. McQueen-Mason,Gabriele Pinto,Claudia Ciniglia,James P. J. Chong,Peter D. Ashton,Seth J. Davis

DOI: https://doi.org/10.1101/076208

2016-01-01

Abstract:We report here the de novo assembly of a eukaryotic genome using only MinION nanopore DNA sequence data by examining a novel Galdieria sulphuraria genome: strain SAG 107.79. This extremophilic red alga was targeted for full genome sequencing as we found that it could grow on a wide variety of carbon sources and could uptake several precious and rare-earth metals, which places it as an interesting biological target for disparate industrial biotechnological uses. Phylogenetic analysis clearly places this as a species of G. sulphuraria . Here we additionally show that the genome assembly generated via nanopore long read data was of a high quality with regards to low total number of contiguous DNA sequences and long length of assemblies. Collectively, the MinION platform looks to rival other competing approaches for de novo genome acquisition with available informatics tools for assembly. The genome assembly is publically released as NCBI BioProject PRJNA330791. Further work is needed to reduce small insertion-deletion errors, relative to short-read assemblies.
Is the whole greater than the sum of its parts? De novo assembly strategies for bacterial genomes based on paired-end sequencing

Ting-Wen Chen,Ruei-Chi Gan,Yi-Feng Chang,Wei-Chao Liao,Timothy H. Wu,Chi-Ching Lee,Po-Jung Huang,Cheng-Yang Lee,Yi-Ywan M. Chen,Cheng-Hsun Chiu,Petrus Tang

DOI: https://doi.org/10.1186/s12864-015-1859-8

IF: 4.547

2015-08-28

BMC Genomics

Abstract:BackgroundWhole genome sequence construction is becoming increasingly feasible because of advances in next generation sequencing (NGS), including increasing throughput and read length. By simply overlapping paired-end reads, we can obtain longer reads with higher accuracy, which can facilitate the assembly process. However, the influences of different library sizes and assembly methods on paired-end sequencing-based de novo assembly remain poorly understood.ResultsWe used 250 bp Illumina Miseq paired-end reads of different library sizes generated from genomic DNA from Escherichia coli DH1 and Streptococcus parasanguinis FW213 to compare the assembly results of different library sizes and assembly approaches. Our data indicate that overlapping paired-end reads can increase read accuracy but sometimes cause insertion or deletions. Regarding genome assembly, merged reads only outcompete original paired-end reads when coverage depth is low, and larger libraries tend to yield better assembly results. These results imply that distance information is the most critical factor during assembly. Our results also indicate that when depth is sufficiently high, assembly from subsets can sometimes produce better results.ConclusionsIn summary, this study provides systematic evaluations of de novo assembly from paired end sequencing data. Among the assembly strategies, we find that overlapping paired-end reads is not always beneficial for bacteria genome assembly and should be avoided or used with caution especially for genomes containing high fraction of repetitive sequences. Because increasing numbers of projects aim at bacteria genome sequencing, our study provides valuable suggestions for the field of genomic sequence construction.

genetics & heredity,biotechnology & applied microbiology
Discovering multiple types of DNA methylation from bacteria and microbiome using nanopore sequencing

Alan Tourancheau,Edward A. Mead,Xue-Song Zhang,Gang Fang

DOI: https://doi.org/10.1038/s41592-021-01109-3

IF: 48

2021-04-05

Nature Methods

Abstract:Bacterial DNA methylation occurs at diverse sequence contexts and plays important functional roles in cellular defense and gene regulation. Existing methods for detecting DNA modification from nanopore sequencing data do not effectively support de novo study of unknown bacterial methylomes. In this work, we observed that a nanopore sequencing signal displays complex heterogeneity across methylation events of the same type. To enable nanopore sequencing for broadly applicable methylation discovery, we generated a training dataset from an assortment of bacterial species and developed a method, named nanodisco (https://github.com/fanglab/nanodisco), that couples the identification and fine mapping of the three forms of methylation into a multi-label classification framework. We applied it to individual bacteria and the mouse gut microbiome for reliable methylation discovery. In addition, we demonstrated the use of DNA methylation for binning metagenomic contigs, associating mobile genetic elements with their host genomes and identifying misassembled metagenomic contigs.

biochemical research methods
Fast and accurate de novo genome assembly from long uncorrected reads

Robert Vaser,Ivan Sović,Niranjan Nagarajan,Mile Šikić

DOI: https://doi.org/10.1101/068122

2016-08-05

Abstract:The assembly of long reads from Pacific Biosciences and Oxford Nanopore Technologies typically requires resource intensive error correction and consensus generation steps to obtain high quality assemblies. We show that the error correction step can be omitted and high quality consensus sequences can be generated efficiently with a SIMD accelerated, partial order alignment based stand-alone consensus module called Racon. Based on tests with PacBio and Oxford Nanopore datasets we show that Racon coupled with Miniasm enables consensus genomes with similar or better quality than state-of-the-art methods while being an order of magnitude faster. Racon is available open source under the MIT license at https://github.com/isovic/racon.git .

A complete bacterial genome assembled de novo using only nanopore sequencing data

Oxford Nanopore sequencing, hybrid error correction, and de novo assembly of a eukaryotic genome

Nanopore sequencing and assembly of a human genome with ultra-long reads

Oxford Nanopore R10.4 long-read sequencing enables the generation of near-finished bacterial genomes from pure cultures and metagenomes without short-read or reference polishing

Hybrid De Novo Genome Assembly for the Generation of Complete Genomes of Urinary Bacteria using Short- and Long-read Sequencing Technologies

Efficient assembly of nanopore reads via highly accurate and intact error correction

A Pipeline for Completing Bacterial Genomes Using in Silicoand Wet Lab Approaches

Gapless assembly of complete human and plant chromosomes using only nanopore sequencing

Oxford nanopore long-read sequencing enables the generation of complete bacterial and plasmid genomes without short-read sequencing

Evaluation of the accuracy of bacterial genome reconstruction with Oxford Nanopore R10.4.1 long-read-only sequencing

Matching Excellence: ONT’s Rise to Parity with PacBio in Genome Reconstruction of Non-Model Bacterium with High GC Content

UNAGI: Yeast Transcriptome Reconstruction and Gene Discovery Using Nanopore Sequencing

Matching excellence: Oxford Nanopore Technologies' rise to parity with Pacific Biosciences in genome reconstruction of non-model bacterium with high G+C content

Technical report on best practices for hybrid and long read de novo assembly of bacterial genomes utilizing Illumina and Oxford Nanopore Technologies reads

MAECI: A Pipeline for Generating Consensus Sequence with Nanopore Sequencing Long-read Assembly and Error Correction

Reducing assembly complexity of microbial genomes with single-molecule sequencing

Using MinION Nanopore Sequencing to Generate a De Novo Eukaryotic Draft Genome: Preliminary Physiological and Genomic Description of the Extremophilic Red Alga Galdieria Sulphuraria Strain SAG 107.79

Is the whole greater than the sum of its parts? De novo assembly strategies for bacterial genomes based on paired-end sequencing

Discovering multiple types of DNA methylation from bacteria and microbiome using nanopore sequencing

Fast and accurate de novo genome assembly from long uncorrected reads