Abstract:The growing interest in sustainable and biodegradable materials has prompted significant attention towards natural fiber-reinforced composites (FRC) due to their lower environmental impacts. In a similar sustainable vein, this study fabricated composite materials utilizing bagasse fibers with the 3D SLA (Stereolithography) printing method. To start with, a novel fiber extraction process was adopted for extracting fiber from the bagasse stem in three distinct methods (Process-1, Process-2, and Process-3). The fiber extraction process includes washing, sun-drying, manual collection of rind fibers, immersion of rind fibers in NaOH at specific concentrations for specific durations, combing, and drying. In Process-1, the rind fibers were immersed in 5% NaOH for 15 h, while in Process-2 and Process-3, the rind fibers were immersed in 1% NaOH, but the soaking time varied: 25 h for Process-2 and 18 h for Process-3.for 25 h, and in Process-3, the rind fibers were immersed in 1% NaOH for 18 h. The resulting bagasse fibers underwent comprehensive property assessment with a focus on functional group analysis, diameter measurement, and tensile strength assessment. Subsequently, these fibers were used to fabricate composite materials via the 3D SLA printing technique after being treated in a NaOH solution. The Fourier Transform Infrared (FTIR) Spectroscopy results clearly showed that a fraction of hemicellulose and lignin was removed by NaOH, resulting in improved tensile strength of the bagasse fibers. Three-dimensional-printed composites reinforced with bagasse fibers extracted through the P1 method showed the highest improvement in tensile strength (approximately 70%) compared to specimens made from pure resin. The lack of pores in the composite and the observable fiber fracture phenomena clearly indicate that 3D printing technology effectively enhances the quality of the interface between the fiber and the matrix interfacial bonding, consequently resulting in improved tensile properties of the composites. The 3D-printed composites reinforced with bagasse fiber showcased impressive tensile properties and provided solutions to the limitations of traditional composite manufacturing methods. This sets the stage for developing innovative composite materials that combine natural fibers with cutting-edge fabrication techniques, offering a promising path to tackle present and future economic and ecological challenges.

3D Extrusion Printability of Sugarcane Bagasse Blended with Banana Peel for Prospective Food Packaging Applications

Evaluating the 3D printability of pearl millet flour with banana pulp blends

Natural Biodegradable Poly(3-hydroxybutyrate- co -3-hydroxyvalerate) Nanocomposites with Multifunctional Cellulose Nanocrystals/Graphene Oxide Hybrids for High-Performance Food Packaging.

Development and characterization of food packaging bioplastic film from cocoa pod husk cellulose incorporated with sugarcane bagasse fibre

Films derived from thermoplastic starch/alginate/spent coffee grounds for food packaging applications

Fabricating Starch-Based Bioplastic Reinforced with Bagasse for Food Packaging

Preparation and characterization of Cassava starch/Polybutylene (adipate-co-terephthalate) biodegradable composite film

Towards Sustainable Packaging Using Microbial Cellulose and Sugarcane (Saccharum officinarum L.) Bagasse

Development of ternary polymeric films based on cassava starch, pea flour and green banana flour for food packaging

Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (arenga pinnata) starch for food packaging

Cassava starch-processing residue utilization for packaging development

Valorization of Food Industry Waste Streams Using 3D Food Printing: A Study on Noodles Prepared from Potato Peel Waste

Sustainable papaya plant waste and green tea residue composite films integrated with starch and gelatin for active food packaging applications

Three-dimensional Printing of Poly(lactic Acid) Bio-Based Composites with Sugarcane Bagasse Fiber: Effect of Printing Orientation on Tensile Performance

Development and characterization of PLA and Cassava starch‐based novel biodegradable film used for food packaging application

Enhancement of Additively Manufactured Bagasse Fiber-Reinforced Composite Material Properties Utilizing a Novel Fiber Extraction Process Used for 3D SLA Printing

Printability Improvement of Rice Starch Gel Via Catechin and Procyanidin in Hot Extrusion 3D Printing

Potential use of banana peel (Musa cavendish) as ingredient for pasta and bakery products

Biodegradable carboxymethyl cellulose based material for sustainable packaging application

3D Extrusion Printing and Post-Processing of Fibre-Rich Snack from Indigenous Composite Flour

From bulk banana peels to active materials: Slipping into bioplastic films with high UV-blocking and antioxidant properties